Having problems with your Dell Dimension 2400 PC Desktop ?

Diskette drive 0 seeks failure;password

\015 Im not sure what your asking. I tried to fix screen resolution. I went into bios and tried to change password so that I could run Windows Vista in repair mode. Now it wont allow me to key anything for the diskette Drive 0 seeks failure. Keyboard works only for Enter. Wont allow me past error screen. F2,F12, F8 nothing works. Help!!\015

Answers :

Open the case and reset the BIOS using the jumper: move it from 1-2 pins to 2-3 for 5 minutes.
Repair Help & Product Troubleshooting for Dell Dimension 2400 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Floppy diskette seek failure


Boot into setup by pressing F2 or F10 depending on your bios and disable the floppy drive setting. ... PC Desktops

Keyboard failure and diskette drive 0 seek failure


Been trying to figure this out for weeks have you tried a Dell keyboard It has worked for others but not for me and no It won't boot from CD because u need the keyboard to press any key to activate boot I even tried a flash drive to boot but my boot ... Dell Dimension C521 PC Desktop

Problems with getting bootable disks to be read - Dell/VISTA


Replace the CMOS battery, go into the BIOS and disable the 'Floppy Seek' function, reconnect the SETA drives and you should be good to go...The battery has about a 3 yr life expectancy, so after being 'off' for an extended period, I suppo ... Dell Inspiron 531 Athlon 64 X2 4400+ 2.3GHz 1GB 500GB DVD RW Vista Home Premium PC Desktop

Diskette drive 0 seek failure


My guess if it's new is that it doesn't have a floppy drive but thinks it should.Enter BIOS setup by hitting F1, F2, Del or similar at startup (there should be a message saying Press <some button> to enter setup).Then it ... PC Desktops

Boot up screen says "diskette drive 0 seek failure"


Press F2 look through the menus and remove / disable 3.5 floppy drives. ... Dell Dimension 8400 PC Desktop

Floppy diskette seek failure


F2 Scroll down to "Drives" and open the menu. choose "Diskette Drive" and turn it "Off". ... Dell Dimension 4600 PC Desktop

Floppy Diskette Seek Failure on boot up


Hello there:This is a setting in the bios , so what you are going to have to do is boot into bios and under the boot section and check to see if the floppy drive is a option that is part of the boot sequense if it is change it so th ... Dell Dimension 4600 PC Desktop

F1 floopy diskette faliure seek faliure


Ok lets assume you are trying to use the floppy disc if that is the case either the floppy disc is bad or the drive is bad. Replace the affected party. Try a new floppy to test if its the disc. 2 if your getting the error on a computer ... Dell Dimension E310 PC Desktop

My pc go to diskette drive 0 seek failure


U'r hard drive is not communicating with the system. Open the pc (power off) and check the cable connections. While U'r there, clean with blow or vac. U'r HD may have died. The data may still be there and got to with a new hd. ... Dell PC Desktops

I have changed my some programme setting in my computer which now i forgot. later before turning off my computer i updated my computer with those setting. then, next morning when i open my computer i was shocked and terrified when i found it's not working and showin diskette drive 0 seek failure. i have tried F1 and F2 but didn't work then i tried boot but unfortunately that didn't work as well. and when i tried the run diagonistic driver cd. i was big time smack down when it said cd doesn't wor


If the system has a floppy drive, take the diskette out.\015\012\015\012If the system has no floppy disk drive (Most Likely) boot to the BIOS and turn off the diskette controller and make sure diskette options are set to NONE. It appears you r ... Dell Dimension 2400 PC Desktop

Dell dimension 2400 diskette drive 0 seek failure


Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cab ... Dell Dimension 2400 PC Desktop

I KEEP GETTING AN ERROR ON MY COMPUTER, DISKETTE DRIVE 0 SEEK FAILURE, HOW DO I GET MY COMPUTER BACK UP?


You may need to replace the drive and re-install your operating system and software.\015\012A seek error means that the drive controller cannot locate the sector where information is stored or that the information stored at that point is corrupted.\0 ... PC Desktops

Drive 0 Seek Failure


Do you have a floppy drive on this computer, If so this message means that the drive is bad.\015\012If you want to disable the message or you do not have a floppy drive, do the following:\015\012\015\012Go into CMOS set ... PC Desktops

Hi! my computer doesn't start normally it goes back to the same error every time. Errors: Floppy diskette seek failure Drive 3 not found: Parallel ATA,PATA-1 (PRI IDE Slave) Strike the F1 key to conti


Sounds like you have a bad/disconnected Hard Drive and the system is looking for a second boot device (ie: Floppy with a disk) or your primary IDE channel on your motherboard is bad ... Dell Dimension 3100 PC Desktop

Diskette drive 0 seeks failure;password


Open the case and reset the BIOS using the jumper: move it from 1-2 pins to 2-3 for 5 minutes. ... Dell Dimension 2400 PC Desktop

Drive 0 seeks error...when powering up, I can't find my "C" drive


Use kaspersky internet security demo software.Check the hdd. ... Dell Vostro 200 Desktop Computer

Computer will not boot up.


That means the BIOS is looking for a floppy drive that possibly doesn't exist.Go into the BIOS by pressing F2 and where it says diskette drive on the main screen, highlight it and choose the option to disable it. Then save changes and le ... Dell Inspiron 530 Desktop Computer

A screen that says diskette drive 0 seek failure keeps appearing. hoow to i start windows normally and get rid of this screen?


It is vey simple.Restart the Computer and kepp tapping F2 key and go to setup screen.under setup screen you see an option "Diskette Drive A" or "Floppy Drive" highlight it and it will say 1.44" or 3 and half inch. press space bar and turn ... Dell Dimension 2400 PC Desktop

Hi! my computer doesn't start normally it goes back to the same error every time. Errors: Floppy diskette seek failure Drive 3 not found: Parallel ATA,PATA-1 (PRI IDE Slave) Strike the F1 key to continue, F2 to run the setup utility. I tried to get into BIOS setting and F1,F2 settings every thing looks fine, but still my system doesn't start. Please help. Thanks


Enter cmos setup and turn off floppy drive seek. also, disable floppy drive. then save your changes and exit. ... Dell Dimension 3100 PC Desktop

New hard drive install issues


My first suggestion would be to move your boot sequence for the CD-ROM up to the top and the floppy drive to last if you do not have one. (Or second if you do have one.) \015\012\015\012You have to boot from the CD first. Once you get the ... Dell Dimension E510 PC Desktop

Computer looking for a non-exsistant drive


Restart, press f2 on dell logo, it will take you to system setup, in sys setup, enter into std. cmos features, in that you will find drive a, i will list some drive statin 1.44m bla bla, change it to none, thats it!!! no need to change the hdd boot o ... Dell Inspiron 530 Desktop Computer

MY FRIENDS DESKTOP COMPUTER NOT READING ANY TYPE OF MEDIA DVD OR CD EJECTS THE MEDIA AFTER TO CLICK ON THE CD/DVD-RW DRIVE AND SAYS INCERT A DISK INTO DRIVE E?


Its looking for a floppy drive ..go to the bios and take the floppy drive out .. ... PC Desktops

Black screen with Diskette drive 0 seek failure on it. pressf1 to continue, f2 to enter setup


Diskette drive o or disk drive o? f2 to enter bios check boot options to boot on drive o [hdd-0], most boot options go floppy,cd-rom, hdd-0 ... Dell Inspiron 530s Desktop Computer

Hello, I have a Dell XPS 400 system that has a bad hard drive. So I went out and bought a new SATA drive, and it's not detecting it upon boot. When I go to the boot menu on F12, it says something about floppy diskette seek failure....not sure what to do...power adapter and sata cable are hooked up fine...


Was the original drive also a SATA? If not, then you would need to enter the bios setup and enable the onboard SATA channels. If the bios had gotten defaulted, as from a dead CMOS battery etc. it could have also caused your original SATA drive to be ... Dell Dimension XPS 400 PC Desktop

Diskette drive 1 seek failure is shown on when the computer is turned on primary hard disk drive 1 not found secondary hard disk drive 1 not found.


Hmmmm That is strange.If all three of these error messages started at the same time it probably means that something has seriously gone wrong with the Input Output controller(s) on your motherboard.Have you moved house recently? Som ... Dell OptiPlex GX110 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4803 seconds