Having problems with your Dell Dimension 2400 PC Desktop ?

Dell dimension 2400 diskette drive 0 seek failure

\015 I bought a new HP monitor yesterday for my older Dell PC, hooked up the new and it worked great! I ran a screen saver product to check out the graphics overnight only to awake to a still screen. no response, I had to turn my PC off manually and when I restarted it I was redirected to the bios and it states,\015\012Diskette drive 0 seek failure\015\012Primary drive 0 not found\015\012primary drive 1 not found,\015\012A slight kick in the pants having just upgraded! I,ve already tried to disable the floppy drive like others have suggested but to no avail. I can't find anything in the F2 mode that allows me to look/change FDC or FDS and disable am I looking in the wrong spot? and or is my PC Cashed? Thanks gatch88\015

Answers :

Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cable at the motherboard and reconnect it again including the power connector on the hard drive.
\015\012There maybe an option to test the hard drive in the BIOS, if so use it to test the hard drive.
\015\012If the hard drive is faulty, you need to replace it and install Windows, the various device drivers and your programs to get a functioning computer again.
\015\012You might consider buying a new computer (it will be faster & better than the old Dell) and you have your new monitor to go with it.
Repair Help & Product Troubleshooting for Dell Dimension 2400 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell dimension 2400 diskette drive 0 seek failure


Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cab ... Dell Dimension 2400 PC Desktop

Keyboard failure and diskette drive 0 seek failure


Been trying to figure this out for weeks have you tried a Dell keyboard It has worked for others but not for me and no It won't boot from CD because u need the keyboard to press any key to activate boot I even tried a flash drive to boot but my boot ... Dell Dimension C521 PC Desktop

Floppy diskette seek failure


Boot into setup by pressing F2 or F10 depending on your bios and disable the floppy drive setting. ... PC Desktops

Problems with getting bootable disks to be read - Dell/VISTA


Replace the CMOS battery, go into the BIOS and disable the 'Floppy Seek' function, reconnect the SETA drives and you should be good to go...The battery has about a 3 yr life expectancy, so after being 'off' for an extended period, I suppo ... Dell Inspiron 531 Athlon 64 X2 4400+ 2.3GHz 1GB 500GB DVD RW Vista Home Premium PC Desktop

Diskette drive 0 seek failure


My guess if it's new is that it doesn't have a floppy drive but thinks it should.Enter BIOS setup by hitting F1, F2, Del or similar at startup (there should be a message saying Press <some button> to enter setup).Then it ... PC Desktops

Boot up screen says "diskette drive 0 seek failure"


Press F2 look through the menus and remove / disable 3.5 floppy drives. ... Dell Dimension 8400 PC Desktop

Floppy diskette seek failure


F2 Scroll down to "Drives" and open the menu. choose "Diskette Drive" and turn it "Off". ... Dell Dimension 4600 PC Desktop

Trying to start computer up and I get a diskette drive 0 seek failure message SATO 0 ST3160815as 4.ada SATO 1 HL-DT-ST DVD+/RW GSA-HT3H B103 SATO 2 NONE SATO 3 NONE


Go into the bios of your Dell and ensure that the Sata HDD 0 is being seen by the bios and that it has not been switched with the DVD. Make sure that the sata cables on the main board are plugged in correctly the hard drive should be in sata port 0 a ... Dell Inspiron 531 Athlon 64 X2 4400+ 2.3GHz 1GB 500GB DVD RW Vista Home Premium PC Desktop

Diskette driv 0 seek failure


My dimension 2400 won't boot keeps saying diskette drive 0 failure ... Dell Dimension C521 PC Desktop

New hard drive install issues


My first suggestion would be to move your boot sequence for the CD-ROM up to the top and the floppy drive to last if you do not have one. (Or second if you do have one.) \015\012\015\012You have to boot from the CD first. Once you get the ... Dell Dimension E510 PC Desktop

Floppy diskette seek failure


Try to go to bios set up..then change the boot order..in the boot tab,,change the "first boot" label with hard disk..then it wont seek for floppy again.. ... Dell Dimension E310 PC Desktop

RAID-1 failure on Dell Dimension 9100 Desktop


Since you are using RAID 1 (Mirroring) you will only need to send one drive for data recovery.\015\012\015\012Since the Dimension 9100 uses SATA HDDs yes you can increase the storage capacity up to a matched pair of 650GB drives. I'd suggest ... Dell Dimension 9100 PC Desktop

Can not get into safty mode get floppy diskette seek failure i have a dell dimension 5150


Hi\015\012 To resolve the problem you are facing follow the steps below:\015\012\015\012\015\012Turn on (or restart) your computer. \015\012When the blue DELL™ lo ... Dell Dimension 2400 PC Desktop

Computer looking for a non-exsistant drive


Restart, press f2 on dell logo, it will take you to system setup, in sys setup, enter into std. cmos features, in that you will find drive a, i will list some drive statin 1.44m bla bla, change it to none, thats it!!! no need to change the hdd boot o ... Dell Inspiron 530 Desktop Computer

MY FRIENDS DESKTOP COMPUTER NOT READING ANY TYPE OF MEDIA DVD OR CD EJECTS THE MEDIA AFTER TO CLICK ON THE CD/DVD-RW DRIVE AND SAYS INCERT A DISK INTO DRIVE E?


Its looking for a floppy drive ..go to the bios and take the floppy drive out .. ... PC Desktops

Restarts or reboots screen reads "diskett 0 drive failure"


1024 X 768 is the ideal setting for a 17" Monitor. Are you still getting sound output despite the error message? If no sound then your integrated sound card has failed, you will have to install anew one in the PCI Slot, otherwise forget about the war ... Dell desktop and monitor -Inspiron 530-Intel?® CoreTM2 Duo Processor E4600

Dell Inspiron 531s Windows Vista


If you are given the option to go into the setup (F2) try to disable the floppy disk drive or move the hard drive up in the boot order. ... Dell Inspiron 531s Desktop Computer

My pc go to diskette drive 0 seek failure


U'r hard drive is not communicating with the system. Open the pc (power off) and check the cable connections. While U'r there, clean with blow or vac. U'r HD may have died. The data may still be there and got to with a new hd. ... Dell PC Desktops

Drive 0 Seek Failure


Do you have a floppy drive on this computer, If so this message means that the drive is bad.\015\012If you want to disable the message or you do not have a floppy drive, do the following:\015\012\015\012Go into CMOS set ... PC Desktops

Diskette drive 0 seeks failure;password


Open the case and reset the BIOS using the jumper: move it from 1-2 pins to 2-3 for 5 minutes. ... Dell Dimension 2400 PC Desktop

Floppy Diskette Seek Failure on boot up


Hello there:This is a setting in the bios , so what you are going to have to do is boot into bios and under the boot section and check to see if the floppy drive is a option that is part of the boot sequense if it is change it so th ... Dell Dimension 4600 PC Desktop

Te drive O seek failure - Dell Inspiron 530 Desktop Computer


Drive 0 is the first hard drive.If you are getting a seek failure, your hard drive has gone bad. ... Dell Inspiron 530 Desktop Computer

Drive 0 seeks error...when powering up, I can't find my "C" drive


Use kaspersky internet security demo software.Check the hdd. ... Dell Vostro 200 Desktop Computer

New HDD Install Prob


Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

I have changed my some programme setting in my computer which now i forgot. later before turning off my computer i updated my computer with those setting. then, next morning when i open my computer i was shocked and terrified when i found it's not working and showin diskette drive 0 seek failure. i have tried F1 and F2 but didn't work then i tried boot but unfortunately that didn't work as well. and when i tried the run diagonistic driver cd. i was big time smack down when it said cd doesn't wor


If the system has a floppy drive, take the diskette out.\015\012\015\012If the system has no floppy disk drive (Most Likely) boot to the BIOS and turn off the diskette controller and make sure diskette options are set to NONE. It appears you r ... Dell Dimension 2400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7842 seconds