Having problems with your Dell Computer Processors ?

System does not recognize reading drive D: or burner drive E:

\015 For any disks inserted into either one of the disk drives, there is no reading or acknowledgement that they are even in the computer.\015\012There is no response that is shown when either is trying to be used.\015

Answers :

Hello, if i understand you right, you have 2 cd-dvd drives in your computer and they don't work. ok, see if the secondary ide channel is enabled-in the system bios-when you turn it on- could be the f1or f2 or del key, it should say in the post screen(if you don't allready know) do not change settings,if you are not sure. if i is enabled try disconnecting one drive at a time. could be a bad one messing you up.and make sure the jumper on the drive is set, for master or cable select, marked on back of drives. did something happen? or did it just stop working? hope this helps you. reply if you need further assistance. good luck!
Repair Help & Product Troubleshooting for Dell Computer Processors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My burner stopped reading cds and burning cd's. The computer recognizes that there is a drive there, but the drive does not work. Any ideas? I can't figure how to update its firmware or anything.I don't have the cd any longer that came with it, but I guess it wouldn't matter considering it won't read any cd's.

Know that I'm not perfect, and may not have the solution to all questions in my areas of expertise, but I would like you to consider this.1.Windows has the nasty habit of losing 'bits and pieces' of crucial software codes, for various har ... PC Desktops

Cd/DVD drive has stopped working

Sounds like your Acer is not recognizing your DVD meaning your driver is not letting your computer talk to your dvd player. Try to determine what DVD player you have and search GOOGLE for drivers. Your computer might of come with a disk which have ... Acer Aspire 5100 Notebook

System does not recognize reading drive D: or burner drive E:

Hello, if i understand you right, you have 2 cd-dvd drives in your computer and they don't work. ok, see if the secondary ide channel is enabled-in the system bios-when you turn it on- could be the f1or f2 or del key, it should say in the post screen ... Dell Computer Processors

Fujitsu LifeBook S7211 DVD burner can't access CD

It may be one of the optics on the drive that has gone away, if so replacing the drive is the way to go. Most of the time you can get one off of eBay for around $30 or so.\015\012\015\012If the drive is showing an error (or is missi ... Fujitsu Lifebook S7211 Notebook PC Notebook

Nero dvdburner will read dvd then message comes on to put in a disk for writing but Ihave already put the disk in. I have a system that uses two disks to burn.

Hi,Open Nero Burning ROM.Dismiss any startup options, clear the new program interface of any messages.With the Nero Workspace on screen and clean, on the toolbar there is a drop down list toward the far right that when d ... PC Desktops

Lite on DVD Combo disk read failure

You could take the drive out of the encloser and hook it up. There could be a flaw in the enclouser ive had that happen before to me. I just took it out and put it in standard if this dosent work then there is a flaw in the dvd burner ... AMD Duron 1.3 GHz (cpu-amd-1.3g-o) Processor

Drive can't read DVD

Jeff - If you have not changed your software configuration in any way since the last time you could successfully play a DVD, it could be that the drive has failed. You can test this most easily by taking these DVD's that won't play in your Acer now, ... Acer Aspire 3000 Notebook

I have a maxtor 6L080M0 hard drive that has crashed The return code is 7 Is there any way to fix this problem.

If the following determines you have hard drive failure then you may have to purchase a new HD. Follow what is recommended from the manufacturer below. READ EVERYTHING.\015\012\015\012According to Seagate the makers of Maxtor, you have a ... PC Desktops

I bought dvd r media,..im having problems copying movies onto it...any solutions?

I have some important questions to ask you to find out what\015\012could be going wrong. Copying or burning DVD's takes a lot of skill and\015\012practice. It usually does not work the first couple of times. This\015\012is frustrating to everyone, ... PC Desktops

Missing NTLDR file

The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

I am trying to burn a DVD that is 1 hour and 49 minutes long and it will not burn correctly. On a DVD-RW it only recorded just a small amount at the beginning and also had music in the background. I tried a DVD-R and it would not work at all. It also seems that the video file is larger than what the DVD can hold but I am using 4.7GB (2hours).

Make sure you treat your blank CD-R's with respect.\015\012Scratches or dust may cause write errors! Handle the disc carefully when transferring it to the CD drive!\015\012 \015\012 \015\012\015\012 \015\012DMA & Auto Insert ... PC Desktops

Cd burner makes blank cds

Try isolating the problem by plugging an external cd/dvd drive via the USB. use this to burn CD/DVD if the process works, replace your laptop dvd drive. ... Dell Dimension 4600 PC Desktop

Maxtor One Touch Mini 4 external 160 Gb no longer recognized by computer. Any way to retrieve data? The disk still spins (I can feel it when I hold it in my hand), but the laptop (Windows XP) won't acknowledge it anymore. It's only a cuople months old, so I can get a new one, but even though THEIR device went bad, they want to charge me $1700 to restore data!!! Unbelievable!

Hello Ifurney,\015\012\015\012\015\012\015\012OK, this a long posting…\015\012\015\0121. There could be a problem with the USB cable. Try to replace the cable with\015\012another one and check.\015\012\015\0 ... PC Desktops

I have a compaq presario and when i turn the computer on it says compaq and in the bottom left hand corner it says hit esc to enter boot setup

This sounds like it does not boot into the Operating System. The boot setup is actually a program that is stored on a Chip inside your motherboard. The program is called CMOS setup and contains all of the options such as power saving, boot order, pro ... PC Desktops

Is ahead nero 6 I believe. wont read disc's now

The Nero burner has (or had) an incompatibility issue with xp, and I believe it was with Nero 5 or 6 that it first arose...It's possible you're experiencing repercussions from that. You're not alone.\015\012But you say it did work fine for awh ... Computer Utilities & Maintenance

EZCD 5.0 and EZCD 6.0

I don't think that 6 and 5 are compatible 6 is an upgrade from 5. I have just 5 on one of my old XP computers and it works fine, but that's all I have. I went to the website and they are not giving any support for Roxio 6 anymore. \015\012I ... Roxio Easy CD & DVD Creator 6 (cdrvlpe6101250) for PC

Cannot copy files to DVD disks

First of all you should have the recording tab ON. Have you tried burning using Nero instead of dragging and dropping? This may solve the problem.\015\012\015\012However, if you prefer to drag and drop, try setting the write speed to a ... E-Machines eMachines Desktop PC

My New Gateway isn't recognizing the cd/dvd drive :(

PLEASE read all the way through before doing any of the options.Thanks,Sounds like something in the system files/registry may have gotten corrupt. Perhaps one of the programs you installed caused an issue. Whatever the case, if it's brand ... Toshiba Satellite P205-S6287 Notebook PC

I can't burn anything with my DVD/CD-ROM but it reads dvds and cds

First reinstall the operating system and then you use either nero 6 or NTI CD? DVD maker ... PC Desktops

Matshita DVD-RAM UJ-840S Problem

CD drives work by reflecting a laser to a sensor, where the existance or absence of a reflected signal corresponds to a 1 or a 0 in the binary code.\015\012\015\012Prefessional "pressed" CD have a much greater level of "contrast" between ... PC Laptops

When i insert a burned cd, the cd is recognized as such, but it does not see the files on it.It considers it as an empty cd

If you have burned CDs using Windows XP, you are already familiar with the Mastered format. The latest version of Windowsoffers a new format, called Live File System. Discs that use the LiveFile System format are often more ... Sony PC Laptops

Dimension4700 desktop: replace read-only dvd dr. with dvd burner?

I've had a lot of luck with www.newegg.com. \015\012Do some searching, see what fits in your price range, and read the reviews. ... Dell Dimension 4700 PC Desktop

Any disk I put in it won't read, I hear it trying to start up but then it just dies. It says there is a Code 10 problem.

This error isn't an easy one to fix, could be multiple things wrong like needing a new driver, a new cd/rom (bad contacts or laser), etc. Please see the following.Description of Code 10-related errors that Device Manager generates i ... PC Laptops

My hp g50 laptop,.says insert reboot disk,.,ive heard the hard drive is dead,.,all i really need is the pictures off it,.,how?

The best way to attempt this is to set your drive as a slave drive and put it in another system. If the system can recognize the drive you may be able to retrieve some files. If its reads some of the files and you're able to attempt to retrieve the ... HP Pavillion G50-111NR Notebook

XPS One will not read CDs or play DVDs

1.use original disc, bcz some brand drives not supported all the discs available in the market.\015\0122.cheak with other disc,if any disc cant read ,then\015\012\015\012 * Open Your CPU system cabinet,then cheak the data ... Dell XPS One All-in-One TV Desktop with Intel Core 2 Duo Processor E4500 - (PRODUCT) RED
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7794 seconds