Having problems with your Dell Computer Monitors ?

Stuck in default monitor setting

\015 I have a Dell Dimension 2350 computer with a Dell E772c monitor and I'm using Windows XP. Here is my problem. I reinstalled Windows XP following the directions in the manual. Now my resolution is set to 640x480 and a default monitor. I've tried changing the resolution by doing the following: Clicking Start, control panel, display, settings and and moving the slide but the slide that you click and drag won't move. I followed the trouble shooting guide and this is how I found out I had a default monitor selected. I followed the instructions that tell you how to install the correct monitor: start, control panel, appearance & themes, display, display properties, settings, advanced, monitor, properties but when you get to the point that you are suppose to click on ''Properties'' it is not highlighted so I can not make that selection and get to the point to select the correct monitor and install the drivers. Please Help!!!\015

Answers :

Please reinstall the videocard+ the drivers..
Repair Help & Product Troubleshooting for Dell Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Stuck in default monitor setting


Please reinstall the videocard+ the drivers.. ... Dell Computer Monitors

Stuck in default monitor setting


Hi,\015\012\015\012After installing XP you have to install all the device drivers. ... Dell Dimension 2350 PC Desktop

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

Stuck screen resolution on monitor


It could have something to do witht he power setting's , go to properties / then screensaver , then click power options , u can turn sleep mode off there, and also change a few other things that may be causing this, your laptop may also have its own ... ViewSonic VG900 19" Flat Panel LCD Monitor

Hyundai LCD monitor L70N Stuck in sleep mode?


I'm not sure if this is the solution, but something happened. I plugged in the monitor one last time before I was going to throw it out. I plugged in the power but left the VGA cable unplugged in hopes that I could get into the menu screen of the mon ... Hyundai ImageQuest L70N 17" LCD Monitor

Laptop stuck at 800x600


Odd problem. To solve, best bet is too reboot computer, press F2 to enter system settings. Go to visual performance and set a terminal networked computer default. May reset all other setting as well though. ... Dell LATITUDE XFR D630 Intel Core 2 Duo T7250 Black 32GB/5... PC Notebook

Memory recall iam from chennai,india and i bought a view sonic E70B colour monitor last year.since once month its giving "memory recall ok?" and asking for yes or no.even after trying both the options its giving the same thing again .and the extension of this is ,afte few days of this "recall ok" appearing frequently,its changing contrast ,brightness ,and what not ,automatically .this is creating a lot of problem .it seems the keys at the bottom of the monitor have failed please suggest a solut


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not ... ViewSonic E70 17" CRT Monitor

MEMORY RECALL OK? problem mine is view sonic monitor .from the past one month its showing problems in display.its giving "MEMORY RECALL OK?" and this whether i press any of the two buttons asked for ,is appearing very frequently.this is continuing for some hours and then itself vanishing. Till then i m unable to do my work on the sys...as i m find it in d middle...


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of \015\012\015\012this manual. - Exception: This ... ViewSonic E70b 17" CRT Monitor

Memory recall mine is one year old view sonic monitor .from the past one month its showing problems in display.its giving "MEMORY RECALL OK?" and this whether i press any of the two buttons asked for ,is appearing very frequently.this is continuing for some hours and then automatically without my pressing any buttons its adjusting the contrast ,brightness pincushion and what not .this is creating a lot of problem for me .please suggest a solution


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not ... ViewSonic E70b 17" CRT Monitor

MEMORY RECALL OK?


From the Users Manual for this monitor:"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not a ... ViewSonic E70f 17" CRT Monitor

I have a Gem gl-190z2 monitor that displays over range after boot


Just lower the screen resolution\015\012\015\012Boot into safe mode first by repeatedly pressing F8 and select safe mode\015\012once booted click on an empty area of the screen and take it from there. 800x600 is a good starting poi ... Systemax Scanport Gem GL-190Z2 (Black) 19 in. Flat Panel LCD Monitor

How to find the drivers and reinstall my monitor


The reason that the screen resolution is stuck on 640X480 is that the video driver is not installed and the default VGA driver was installed. Check Device Manager and If the video driver has a yellow ? against this then it confirm ... Dell E152FP 15" Flat Panel LCD Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

I have an Acer Aspire One MiniBook. I once had it hooked up to another VGA monitor. Now when I log in it shows the ACER logo and the XP screen then turns black. i can hear the windows start up sound and when i reset it i hear the shutdown sound but cant get the desktop to show up. When i hook it up VGA to another monitor it does the same thing on the other monitor and wont switch back. I have tried SAFE MODE but it gets stuck in the dos looking mode. Please help.


Try pressing the fn key and F5 or look for 2 monitors on one of the F keys its F5 on my acer 5520 that switches display modes also try going into the bios i think its F2 as soon as you turn on the laptop press F2 or look on the screen for the key to ... Acer Aspire One AOA150-1635 Notebook

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Viewsonic monitor not detected after service


Hello,If you are running DVI-D(the white connector) then it isn't getting a digital handshake. If you have inspected the connection between the 2 and make sure there is no bent pins inside the connector that it mates with. If you have another c ... ViewSonic Computer Monitors

Change settings and hold them on vw 192 T asus monitor


Hi Paul,\015\012\015\012Hope this solves your problem same I met before. There are a lot of queries it may involve here to streamline the problem. Well, first try to reset the monitor setting manually in OSD mode, then select different fr ... ASUS VW192S Monitor

Display stuck at 640x480 16-bit after a reformat. Dell E176FP Monitor, will not change. No option to select Properties etc in the display settings. No option to select monitor type. I don't remember having this much difficulty the last time I reformatted it. Can anyone help?


You need the driver for the video. The default driver will just do minimum resolution. ... Dell E176FP 17" LCD Monitor

Monitor resolution not listed, Driver update issue


My compliments. Your description of your problem is great. I know what you've done and I understand your problem.\015\012\015\012However, I am wondering about a few things that may help you. the video settings that you are referring to ... AOC 917Sw 19" LCD Monitor

Colors have gone wrong


There could be 3 reasons for this...1. If color settings are changed from the computer...try to reset to defaults2. if colors are changed from monitor..try to reset to factory defaults3. If ... Dell E176FP 17" LCD Monitor

Monitor screen display stretched center but squashed/narrow edges


On the monitor itself, I am guessing this is a desktop? There are buttons for adjustment. Look for the menu button around the bezel of the monitor and press it. Scroll through the settings for the default setting and press that. Once the default sett ... Computer Monitors

Neon blue hurts my eyes


You might wanna reset your monitor's settings to default, just play with your monitor's options untill you find the reset to default option. If resetting the monitor's settings doesnt work, then try resetting your video card's settings. right click t ... Proview PL913S 19" Flat Panel LCD Monitor

Monitor problems When powered on, whole system boots up but screen then turns black. If I enable VGA mode then screen turns on. On VGA mode, I tried changing the settings to 16 bit etc..screen turns to black again and I have to restart the whole process and enable VGA mode again I then tried plugging in a different monitor...no problem at all.


Hey thr may b 2-3 prblms. i hope, first check the latest driver fr ur motherboard.. install n ckeck whthr th eprblm is solved or nt.. second set ur BIOS setting to default.. it seems tht someone had changed the BIOS setting.. n third.. go to monitor ... EliteGroup A530 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7792 seconds