Having problems with your CTX S762G (Silver) 17" LCD Monitor ?

Flicker monitor hi when i first turn my computor on my monitor clicks and flicks for about ten minutes and, clicks before it settles down why is this ?


Answers :

It is likely only "mode switching" unfortunately there is not much that you can do about this.....sorry I couldnt be more helpfull.
Repair Help & Product Troubleshooting for CTX S762G (Silver) 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Flicker monitor hi when i first turn my computor on my monitor clicks and flicks for about ten minutes and, clicks before it settles down why is this ?


It is likely only "mode switching" unfortunately there is not much that you can do about this.....sorry I couldnt be more helpfull. ... CTX S762G (Silver) 17" LCD Monitor

Sony GDM-F500R (G1 Chassis) has trouble turning on


Sometimes relay contacts get "sticky" from arc oxide corrosion whenever enough electricity is passed from metal to metal...in a perfect mechanical relay, the relay would be sealed in a vacuum. Try swapping relays to transfer the problem. If you can t ... Sony GDM F500R Monitor

To joecoolvette reguarding 2005 compaq presario SR1000 and Dell LCD TFT monitor. The dell monitor was part of my mothers comp and I wasnt given a CD with it. Im sure she dont have it now. As far as the graphics card I plugged the card in first then I ran the disk.


Jason,When a device is installed, Windows 'Breaks it's neck', to find a compatible driver, (Or drivers)If THE driver is not present, then Windows will match up one of it's thousands, of generic drivers it has on hand.The ... Compaq Presario SR1000T (568657) PC Desktop

Similar Problem:posted by Squanto on Feb 26, 2006


Before you give up on this monitor I would try some troubleshooting first. The clicking noise you hear is probably the monitor power going on and off:\015\012\015\012-Make sure you plug your monitor directly into a working wall socket. I?ve had lots ... Dell UltraScan 19" SVGA Monitor, 1600x1200, .25mm, Black P991/B-07

Acer AL1917W goes black


I have recently opened my AL1917 (not wide) but it should work the same. First remove the stand. This is done by removing the plastic cover over the stand hinge (which appears to be part of the back cover, but is'nt.) Mine was done with simple tum ... Acer AL1917W LCD Monitor

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

Hi i have a GNR TS902W monitor it doesnt turn on


Hold down the left and right arrow buttons for 1 minute. The monitor should switch inputs and start behaving again. Mine did that although I never discovered what changed it in the first place. ... GNR 19M1 19" LCD Monitor

Dell 4700 sleep on bootup


Ok here's what i can suggest. Two things.1. Check your power settings by going to the Control Panel and then going to Power Options. Take a look at the power schemes..specifically the option where it says turn of monitor...you can select the ... Dell Dimension 4700 PC Desktop

First let me say that the monitor DOES work on other computers. Just not this one. So it isn't the monitor. My monitor light is green until I plug it into my computer. It then goes amber immediatly and stays amber. Even when the computer is unpluged. If I turn the monitor off, plug it in , then turn the computer on,then turn monitor on, it starts out as green then says opms going into off mode and the light turns amber. There is no monitor hook up from the mother board. It has to plug into a vid


Many people use a vacuum on their computers, and I always advise against it. A vacuum creates Static electricity. Static electricity, will silently fry out your delicate computer components. You may not see it or feel it.To prove the vacu ... Dell Dimension 8100 PC Desktop

Flickers on and off


I also had the same problem with the same monitor. The capacitor cost $1.68 at the radio shack (30117), however, the clerk had no idea what I was talking about and had to locate the drawer myself and sift through trays to find the correct ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor

MONITOR KEEPS GOING OFF.


Try your monitor with another computer. If it's still a problem. \015\012\015\012This is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After the monitor goes off, you\015\012check that you can see t ... Dell E173FP 17" LCD Monitor

Iiyama Pro 452 clicking sound during start-up


Looks like a failing flyback or auto transformer. You will have to service the monitor ... iiyama Vision Master Pro 454 19" CRT Monitor

HP PAVILION LAPTOP SHUTS OFF AND REBOOTS AFTER A FEW MINUTES


This issue could be caused by any of the below possibilities\015\012 \015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. ... PC Desktops

Intermitently, my screen goes dark, but the


1.)It could be your video card\015\0122.) Yes it is expensive for a laptop\015\0123.)I would first check your screen setting for turning off display...\015\012\015\012If you are using vista:\015\012\015\012-Right c ... Toshiba Satellite A105-S4334 Notebook

Screen suddenly goes blank


When you open your pc now,do you still hear a click sounds like you hear before ,when your computer has no problem yet? now there is no sounds .do the ff..\015\0121.try to press the numlock key and observe it ,if the indicator LED lite on and ... Samsung SyncMaster 551 15" CRT Monitor

Rebooting on Dell D600 Latitude


This issue could be caused by any of the below possibilities.\015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. Software issue or error ... Dell Dimension 9200 PC Desktop

Flashing screen when i first turn on my... but turns black immedi


You could have a faulty inverter board or faulty CCFL lamp which can cause the screen to flash.Check out LCD Parts for service, parts and DIY info - click on this link to their WEB site. :- ... Samsung SyncMaster 2233BW 22" LCD Monitor

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little


I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run opt ... PC Desktops

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

My gateway monitor shows a picture for about 1 second then turns to blacked out screen with power light still on. I can shut the power off on the monitor then turn it back on only to have it do the same thing again and again. I have switched to another monitor to check for computer problems, but all of that checks out fine.


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.\015\012\015\012If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in th ... Gateway HD2201 22" LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

How do I remove the back cover on a Dell 2407 WFP?


Hi, I can't offer you a fix for your overheat problem, but here's how to get into the 2407WFP!\015\012\015\012Place the monitor face down on the bench. Remove the four screws from the back.\015\012Turn the monitor over and lay on it ... Dell UltraSharp 2407WFP 24" LCD Monitor

System Restore... I have tried to run system restore on my computer.It satart to proceed as normal but when the computer restarts its says it couldnt restore to that date and no changes were made.ive tried doing system restore for muerous dates and the same thing happens. Any one know what to do? Help will be very appreciated. Reply Soon


System Restore is a valuable tool Microsoft released with Windows Me and substantially enhanced with Windows XP. (Windows 98 users can only gain this functionality with a third-party program.) Although it is not a backup utility per se, it performs a ... PC Desktops

HP W1907 Monitor goes black after resolution change


Hi and welcome to FixYa,A couple of ideas you can explore/try:\015\012\015\012temporarily replace the HP W1907 with another monitor. The purpose is to determine if it is a monitor issue or vi ... HP w1907 LCD Monitor

When turn on the gateway screen apear, but the monitor turn off or black and not apear nothing my computer is gateway profile 4 all in one


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in the left hand pane ... Gateway Profile 4 All In One (MPN PROFILE4SE) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9060 seconds