Having problems with your Creative Labs SBS 370 Computer Speakers ?

Creative Speaker Of Model SBS-370 The Volume Control is not working, How to directly Connect those two Wires connected to Volume control,bypassing the Volume Control Switch

Answers :

1. connect:Both Ground (copper wires) with Green wire
2. Connect Red with Blue and
3. Connect White with Yellow
This will give Stereo Output.
Generally this is due to ground problem, signal gnd and power gnd need to be separate (i faced the same problem even i dint do anything from hardware side .. don ask me hw it happned).. open the volume controller u will find a small PCB (printed circuit board) with volume control ,LED and a connector. see at the back side of the voume control u will see five pins starting from right side short 1st and fourth pin. provided you connect ground of both cables which goes inside the volume controller.. it works for me.. you may experiment as i did...
Repair Help & Product Troubleshooting for Creative Labs SBS 370 Computer Speakers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Remote Control Repair

Open up your controller and look for 4 Wire! Green, light green, blue and yellow! Green and yellow is for power i guest! Light green and blue is for bass. 4 together max everything! ... Computer Speakers

Strange problems with Z-2300's

I'm having this same problem and have sort of solved it with a really wierd technique I found at Logitech. Evidently this problem is related to the control pod rather then the RCA jack. Try this:\015\012Unplug the control pod from ... Logitech Z-2300 Computer Speakers

Yamaha YST-MSW10 subwoofer quits after about 10 minutes

This problem can be solved by either of the following:1/ Modify the PCBA to prevent the auto shut off feature from working. This is done by adding a 20k ohm resistor across pins 1 & 2 on the timer IC6. This resistor will prevent the timer f ... Yamaha YST-MSW10 Computer Speakers

Cuts in between on higher volumes & higher bass levels

If you would feel like doing the repair, it can be done if you are somewhat handy with tools & such. Since the speaker unit inside has push-on connectors, no soldering is required. When repairing mine, I searched a lot before I found a ... Logitech Z-340 Computer Speakers

No sound out left channel I-Trigue 3300 2.1

Hey, I had that same problem and looked over it with my Dad, who's very technically minded. Here's what he found:** Begin Quote **We also had no/weak sound on the left channel of the I-Trigue 3300 2.1. Here's what we found (starti ... Creative Labs I-Trigue 2.1 3300 Computer Speakers

Setup problem I'm trying to set it up with Onkyo SR605 A/V Receiver as a home theater system but it doesn't show connections for powered speakers. The receiver has your typical speaker wire hook-ups but because these wires are hooked into the subwoofer, how do I hook it up into the receiver? Is it something as simple as using coaxial or optical from the Controller to the receiver? Will it enable me to use the speakers for AM/FM of receiver? Then we also have the issue of volume control on the Lo

To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:\015\012\015\012Verify that all cables are plugged in correctly. Make sure the rear\015\012and/or center/sub audio cable ... Logitech Z-5500 Computer Speakers

Creative Speaker Of Model SBS-370 The Volume Control is not working, How to directly Connect those two Wires connected to Volume control,bypassing the Volume Control Switch

1. connect:Both Ground (copper wires) with Green wire2. Connect Red with Blue and 3. Connect White with YellowThis will give Stereo Output. ... Creative Labs SBS 370 Computer Speakers

Blue Screen with error 0x000000ED

This behavior can occur if either of the following conditions is true: \015\012\015\012Your computer uses an Ultra Direct Memory Access (UDMA) hard disk controller, and the following conditions are true: \015\012 ... Dell Dimension 3000 PC Desktop

Volume very low won't go up - Altec Lansing Multimedia Computer Speakers

After I posted my problem, I browsed a bit further through the other posts and solutions, until I came across the solution of TrickyTrev34 and gave it a try. However, I did not slice the cable, but did it as follows:\015\012\015\0121. Switch off powe ... Altec Lansing Multimedia Computer Speakers

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Altec Lansing ada745

I work for a charity that had one of these donated today and as I was looking for a new sub for my cinema system I purchased it. I have no other speakers with it and no way of switching or varying the volume. I opened up the back of the sub and slid ... Altec Lansing Multimedia Computer Speakers

Sony Vaio PCG-GRT 260G Wont Start

Wow, seems like you've diagnosed it already. Either it's a bad board trace or a bad connection in the switch control. It sounds like you put it back together before you started pressing on it. I'd try starting with ... Sony VAIO GRT260 Notebook

How do I replace the keyboard in a HP Pavilion dv6451us laptop

To start I suggest you have a No.1, and a No.2 Philips head magnetized screwdriver, a small pair of Needlenose pliers, and a multi-compartment container for the screws.(When working on a laptop this is the ONLY place I would advise using ... HP PC Laptops

Low sound on desktop pc

Hi,I have extensive experience with the CP414 (I used to work for the company that supplied it to MPC). It sounds to me like you have a broken volume knob. On the bottom edge of the LCD panel, just to the right of the MPC logo, there shou ... PC Desktops

Why wont my hp connect to my home wireless - HP Pavilion ze4400 Notebook

\015\012There are a few things you can do to help reliability\015\012You should first make sure that the modem and router are individually \015\012set up correctly.\015\012I do have a guide for that.\015\012Once that is ... HP Pavilion ze4400 Notebook

No sound out of speaker(the one with the volume control on it

I'm taking it that from what you're saying, the other speaker is working perfectly. \015\012\015\012here are a few things you could try, if this is the case. You've probably attempted most of them, but it doesn't hurt to cover all your ba ... Logitech R-10 Computer Speakers

My Gateway 7330 works now, but the power button doesn't

If you go to where the start button connects to the computer mother board and disconnect it. YOu can put a screwdriver across the two spikes coming from the board and it should start. That wil confirm that it is not a board problem.Next get a small b ... Gateway 7330GZ Notebook

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)

Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

I cannot get my laptop to connect to the internet either wirelessly or hard-wired. I have two other laptops, connected wirelessly, and a desktop connected via hardwire. It recognizes the router but says it cannot connect to the internet. As it's a new unit, I've even restored the unit to factory specs but, no change

If you are trying through wireless, first unplug the wire from the laptop,\015\012\015\012make sure that the wireless switch on your laptop is turned on.\015\012\015\012click on start, control panel, network connections/networ ... Gateway 7330GZ Notebook

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Hi wht to do as error 0x000000ED - Dell Dimension 5100 (D51L1) PC Desktop

When you first restart your computer during the upgrade to Windows XP, or when you start Windows XP, you may receive the following error message:\015\012\015\012\015\012\015\012STOP 0x000 ... Dell Dimension 5100 (D51L1) PC Desktop

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks

On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Volume control appears on screen uncommanded and cannot be sent away

I had exactly the same problem. The volume up button was constantly on, causing the on screen display to be permanently displayed. Here is the solution to fix it. This will also work for any other front panel buttons that are misbehaving.\015\0 ... Philips 190B6CB/27 19" LCD

Dell Dimension 8200 does not power up.

1) It could be something as simple as the 4-pin ATX +12 Volt power cable isn't plugged into the motherboard.The 4-pin +12 Volt power cable supply's power to an Intel Pentium 4, and above, processor. Looks like this, ... Dell Dimension 8200 PC Desktop

Wireless signal intermittent

First make sure you have the latest update for your bios and wireless device, your os is probably non preload so clean any access connections utility provided by ibm, rather than using the ibm thinkvantage access connection make sure to use the windo ... IBM ThinkPad T43 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0318 seconds