Having problems with your Compaq Presario SR1120NX 2.66GHZ Tower w/ CD-RW (2018267632) PC Desktop ?

My SyncMaster 930b suddendly went blank except for "Check Signal Cable" box floating around. All has been working fine on my Windows WP Proffessional system. The cable from the desktop CPU has not been disturbed and is still connected properly. Turning monitor off and on does not help.


Answers :

Try a different video card or booting up PC via cd rom. Possibly bad video drivers or card.
Repair Help & Product Troubleshooting for Compaq Presario SR1120NX 2.66GHZ Tower w/ CD-RW (2018267632) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not able to install windows xp


Check the power supply. The voltages should be +12 V yellow, -12 V blue, +3.3 orange, -5 V White, + 5 V red. If the numbers are extremely low or high, you have a problem.\015\012\015\012If on the 12 V wire, you have a voltage difference ... PC Desktops

My SyncMaster 930b suddendly went blank except for "Check Signal Cable" box floating around. All has been working fine on my Windows WP Proffessional system. The cable from the desktop CPU has not been disturbed and is still connected properly. Turning monitor off and on does not help.


Try a different video card or booting up PC via cd rom. Possibly bad video drivers or card. ... Compaq Presario SR1120NX 2.66GHZ Tower w/ CD-RW (2018267632) PC Desktop

Won't turn on - power led comes yellow & blinking


Please perform the steps mention:\015\012\015\012Disconnect the Power cable / A/c adapter/Battery from computer. \015\012Disconnect External peripherials. \015\012Hold down the power button on the computer for 10 seconds. ... Dell OptiPlex SX270 PC Desktop

I removed the processor in my P4 desktop PC and when I replaced the processor the PC would not power up. Have I accidentally unplugged a cable or is there a chance that I've zapped the processor with static?


There is a very good chance of having zapped th cpu wit static if u didnt ground ur stat lec on a radiator or something metal.. or much more likely th motherboard if th points on that were touched..why was th cpu removed.?? and did u apply some anti ... PC Desktops

LAPTOP /no power


It states you are not getting no power on your lap top computer :\015\012\015\012No power or computer does not turn on\015\012Cause:\015\012\015\012No power from the computer can be caused by any of the below possibilities.\015\012 ... Toshiba Satellite M40-S417TD Notebook

Computer crash and restart - PC Desktops


Windows restarts without warning \015\012Cause:This issue could be caused by any of the below possibilities. \015\012Software issue or error. Hardware issue or error. Heat related issue. Comput ... PC Desktops

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Instantaneous shutdown with no warnings!


Software issue or errorErrors generated by software programs can cause a computer to reboot unexpectedly or without warning. If you are running Windows XP see the below section "For Windows XP users" before continuing. \015\012If you are not ru ... Toshiba Satellite A105 Notebook

HP PAVILION LAPTOP SHUTS OFF AND REBOOTS AFTER A FEW MINUTES


This issue could be caused by any of the below possibilities\015\012 \015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. ... PC Desktops

Rebooting on Dell D600 Latitude


This issue could be caused by any of the below possibilities.\015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. Software issue or error ... Dell Dimension 9200 PC Desktop

IBM R30's CMOS Battery Replaced but still trouble


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R30 2656 Notebook

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

I'm having problems starting my desktop computer. After I push the power button, I hear the computer working but it doesn't fully com on. There's no display on the monitor and I continue to hear the computer working and working.


When you say you hear the computer working and working do you mean that the fans are going and the lights are on? \015\012 \015\012i ask this because the fans and power lights can come on just from the powe ... PC Desktops

Does it stay on with no RAM and/or CPU


Laptop will def not power up without ram or cpu.Can you test the hard drive in another pc? ... Toshiba Satellite M45-S265 Notebook

GATEWAY GT5228 I had a GATEWAY GT5228 gave to me because something was wrong with it. But according to the person that gave it to me, the parts are still good. Where can i get something to tell me which part is which? I have an older computer that im going to try to upgrade it some, like the memory, processor, etc...But i dont know what is what inside the computer. Any advice? Thanks.


There is a basic guide i will give ya \015\0121. not all parts are comptable so please check visually before trying to swap them\015\012\015\012a. the large to med size board that everthing plugs into is the MOTHERBAORD or mobo for ... Computer Processors

PC STARTS BUT NO VIDEO SIGNAL IS PRESENT AT THE MONITOR


I was wondering if this person helped you ... Gateway 310 S PC Desktop

Blinking on and off


No offense, Tyson, but would you mind explaining your question a bit better? You wrote "when i out the power cable in it"and that really confuses me. Did you unplug the power cable or did you plug it in?Also, how long ago did this happe ... E-Machines eMachines Desktop PC

Turns on, no bios no screen, just beep.


Now the question is, when the computer first starts up and you hear the beep, that is where it will tell you what your problem is depending on the beep you get.One Long and one Short Beep = Motherboard issueOne Long and Two Short Be ... Gateway GT5028 PC Desktop

Sandisk cruzer not recognized on dell deminsion 3000


\015\012I devised these simple steps that tend to remedy quite a few issues with most USB portable / external hard drives and OTHER devices (though not always)A few things to check but assumes USB and Windows for other interfaces / ... PC Desktops

Monitor displays "No Signal" from Compaq SR1110NX desktop PC. I replaced the power supply 2 months ago and added 1G of RAM. My daughter said it froze on her and tried to turn it off/on 6 to 8 times. Now is powers up, but just displays a steady yellow light. It did go green once after a restart and the drives appeared to be working, but still no signal to monitor. Tried different monitor and cable. Same result. Bad video? Bad motherboard?


Try with a different cable, the pins may be bent. If this isn't working get an additional video card and install it in your CPU. ... HP Compaq Presario SR1110NX PC Desktop

Gateway 702GE desktop When i push the front botton to start it up,the fans start to turn and then stops with no operation. The small green led on the motherboard stays lit and green and the front start button stays lit and blue, but there is no start up. Can anybody help please? Matt


Try removing all the cards from the expansion slots and remove the ram sticks. disconnect the drive cables from the board but dont touch the cpu or power connectors. Now hit the button. If nothing changes, probable board fault. If it now boots up and ... Gateway 702GE PC Desktop

PC issues I have a Medion M3 Compressor 5200 PC desktop. When I try to turn on the computer, I hear the fans start but the keyboard doesn't work and the monitor says : Self Test, Check your PC and Signal Cable, Monitor is working. I'm not sure what the problem is and I don't know how to open the CPU case to check or fix any problems. Any help is much appreciated. Thank you.


Do any of the lights on the keyboard light up, even for a second? Your monitor is probably working right, but I would unplug both the power and video cables from the monitor & pc and re-plug them, then turn it on and see what happens. Also, you ... Medion M3 Composer 5200 PC Desktop

Monitor blacks out after few seconds


I have post on my link how to simply troubleshoot that..but by the way.. here are some tips that you can do..first check your CPU if it is still running after the monitor is black out..if it is running it means it ... Computer Monitors

Emachine t5026 on and right off


Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

Message is input not supported Screen is black with message scrolling, monitor will not communicate with server


Hi,\015\012\015\012Might be the VGA cable of Monitor is not connected with CPU or vice versa.Pls check it and re-connect.If still problem is coming then start the system and press F8 continuously still dos screen and choose a option that ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5748 seconds