Having problems with your Compaq MV 5500 (Carbon, Silver) 15 in.CRT Conventional Monitor ?

My Compaq 5500 monitor blinks with amber light and no display appears.When I pluged out the signal cable the status remians same.Pls help me out

Answers :

First open cpu cabinet.
Then refix RAM memory.
Pull cmos cell for 10 minutes so all settings of motherbord are defaults.
Then pull porcessor fan and processor clean dust from all chip and parts.
Remove pci cards from pci slot then check.
Let me know if you need more assistanse.
Repair Help & Product Troubleshooting for Compaq MV 5500 (Carbon, Silver) 15 in.CRT Conventional Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Compaq 5500 monitor blinks with amber light and no display appears.When I pluged out the signal cable the status remians same.Pls help me out

First open cpu cabinet.Then refix RAM memory.Pull cmos cell for 10 minutes so all settings of motherbord are defaults.Then pull porcessor fan and processor clean dust from all chip and parts.Remove pci cards from pci slot then ... Compaq MV 5500 (Carbon, Silver) 15 in.CRT Conventional Monitor

My Samsung 913t says "Check Signal Cable." HELP PLEASE!!!

Cheap CRT monitors can be picked up at Thrift Stores, quick and cheap way to test your computer output. ... Samsung SyncMaster 191T 19" Flat Panel LCD Monitor

Dell m992 crt monitor

If it's getting no signal, make sure the monitor is set for the correct input. This would be either analog (if your cord has blue ends) or digital (if the connectors are white). Depending on wt yhat your monitor is, a button on the monitor will help ... Dell M992 19" CRT Monitor

Lcd montor not working help - Samsung SyncMaster 920NW Monitor

Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

"No signal detected" when LCD connected with DVI-D Cable

Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Fujitsu-Siemens P15 TFT power/picture problem. it take time to turn on.

It does indeed sounds like the capacitors, I had this problem last year with a Medion monitor where it would turn on and off, when I spoke to Medion they did say that it would need a repair but at the time I wasn't enclined to pay the repair fees for ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

No signal The TV stopped showing a program and on the screen it read, "no signal". In the household there are two other TVs that operate OK. This is a cable TV setup. Checked the cables and they are all connected firmly

This problem requires you to test both the monitor and the signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the ... Envision 19" Widescreen Flat Panel LCD Monitor

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Lg monitor will not turn on

Hi,please check and make sure the power cord is properly pluged in and the signal cable is securely connected to the C.P.U if all these is in place and the monitor still does not come on,check for burnt-out fuse or take to a qualified technician. ... LG L196WTQ-BF 19" Monitor

Why won't the HD channels come in on my lg flat screen monitor? We changed the cable box and everything. Any suggestions?

The first thing you need is the HD tuner. Since you stated that you changed the cable box I will assume that means it's HD ready. So you have HD signal coming in to the cable box box by-way of a coaxial cable. Now you need to get that HD signal ... LG Computer Monitors

An Out of range box

Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

No display on SyncMaster 710N

I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.

OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Notebook with a cracked monitor

Not to sound argumentative, but it's not a useless paperweight yet. You can still connect an external monitor, and toggle over to it.(Connect a VGA monitor, to the VGA connector on the back of the laptop, turn the VGA monitor on. Hold the ... PC Laptops

Samsung syncmaster 2032 BW

\015\012Reboot the PC while the monitor is connected. \015\012Check the connector for bent pins.\015\012Return the unit and get another.\015\012Hope that helps...\015\01 ... Computer Monitors

My screen sayin signal cable disconected

If you are using an lcd monitor, make sure you have connected the vga (screen cable) properly and tight both on the tower and your monitor. if its crt monitor then make sure the vga cable is tightly connected to the tower on the female connector ... Dell UltraScan P1110 21" CRT Monitor

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Power led is on, but there is no image in screen. the signal VGA cable is OK and Power cable is OK too. Thank you to help me.

When you power up the computer check num lock led status when you pres num lock key if it is on and off then your cpu gives display to monitor so it is screen resolution issue.When you power up the computer press F8 key then enter in "Enable vga mode ... BenQ FP71G 17" LCD Monitor

My monitor shows "auto detection mode

What is happening, is the screen is not detecting anything turned on and pluged in. when it cannot find anything, it puts itself in standby mode and waits. if your useing cable, it wont show inclear signals. ... Dell E228WFP LCD Monitor

Monitor starts then goes off, no signal

I would check the LCD against another monitor. It does not have to be a LCD, a regular monitor will do.\015\012This will tell you 2 things, 1. The Video card is good or bad, 2. The Cable is sendinf a good signal. \015\012If when you start ... HP w1907 LCD Monitor

My monitor says there is no signal from my new Dell Studio

I had the same problem and i used the DVI cable and it worked! The VGA slot on the computer was covered and it had a x on it. Maybe they didn't want us to use it... ... Dell Studio Slim-Tower Desktop Computer

Check signal message when data cable unplugged. blank screen when data cable plugged

This problem is most likely to be caused by a bent or broken pin on the CRT video cable at the VGA connector, OR, this could also be caused by a damaged VGA connector on the back of the laptop.\015\012\015\012If neither VGA connector is at fault, the ... IBM E74 17" CRT Monitor

Bluish screen -

Is it a greenish blue?..... if so you have lost your red signal..... check your monitor connectors for bent or broken pins...... usually happens after swapping cables or monitors on a computer..... you could also have a bad cable or monitor.....\015\ ... MPC Computers Envision EN 5100e 15" Flat Panel LCD Monitor

Blinking Blue Light.. >.>

My L17LCD2 just started to display "no signal". I have checked all connection, then tried replacing video cable did not help still same problem. I turn on the computer, then the monitor light is blue 2 seconds i see no signal & then the light tur ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0065 seconds