Having problems with your Compaq FS7600 17" Flat Glass Monitor ?

Monitor keeps stating "monitor going to sleep" now awhile after booting up. The monitor works fine with other computers and the computer in questioning when in safe mode - yet if tried to boot normally, the monitor says going to sleep. Recently, I used that monitor to work on another PC but didn't touch the now affected one - but after plugging it back into the old one.. this is the issue


Answers :

This is probably a video setting issue. In Safe Mode, Windows starts with low resolution and color settings, so the monitor can display them. But when it tries to start normally, Windows is using a video setting the monitor can't handle.

Start the computer and press the F8 key three or four times when the manufacturer's logo screen appears. This should get you to the Windows startup menu screen, and you can pick the option of starting in VGA mode. This will start Windows with video settings any monitor can handle.

Once you have Windows up and running, make sure the video card and monitor types are properly set up. It would also be a good idea to download and install the latest drivers for your video card. You can usually find them at the manufacturer's website.
Repair Help & Product Troubleshooting for Compaq FS7600 17" Flat Glass Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor keeps stating "monitor going to sleep" now awhile after booting up. The monitor works fine with other computers and the computer in questioning when in safe mode - yet if tried to boot normally, the monitor says going to sleep. Recently, I used that monitor to work on another PC but didn't touch the now affected one - but after plugging it back into the old one.. this is the issue


This is probably a video setting issue. In Safe Mode, Windows starts with low resolution and color settings, so the monitor can display them. But when it tries to start normally, Windows is using a video setting the monitor can't handle.S ... Compaq FS7600 17" Flat Glass Monitor

New video card installed, now monitor won't work.


... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor led light goes from green to orange will not respond


Your video card or on-board video is kaput. If it worked fine on the other system, but not working on this one ... then you've blow the video.One note: When the computer is ON, do NOT unplug and re-plug in the monitor. You'll blow the v ... Compaq MV 540 15" CRT Monitor

I want to connect a Ultrasharp 1907 FPt monitor to my Dell inspiron. I have a power cable and also one from monitor to lappy, do I need a driver?


Most monitors now-a-day are pnp or upnp (Plug-n-play or Universal Pug-n-Play) So drivers are not always needed. In windows open control panel and then display then screen resolution. This will allow you to choose whether to use you laptop monitor or ... Dell UltraSharp 1907FP 19" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Dont get vidio at all see drives light up and can


Being able to open a cd or dvd drive only requires power to be going to that unit. The following assumes your monitor is working but is just not displaying anything.What you are describing sounds like you are having a hardware or BIOS iss ... HP Compaq Presario SR2013WM (RE468AA#ABA) PC Desktop

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor

Samsung SyncMaster 710N Monitor SLEEP MODE


Hello,\015\012\015\012The monitor is not going to sleep the power supply board is shutting down.\015\012If you can solder you should be able to repair the monitor yourself.\015\012The problem is caused by blown capacitors on the power boa ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Flashing off My monitor is connected to a HP Presario running Windows Vista. Five to six times a day the monitor flashes off then gives the error of "igfx has stop responding but has successfully recovered" Can anyone tell me how to stop this from happening? Thanks!


Did you check the sleep mode or power off mode? What\015\012do you do to make it come back on? Sounds like it might be getting too\015\012hot and/or going bad. Try it on another machine and see what it\015\012does. Also try another video card bec ... Gateway FPD1975W 19" LCD Monitor

Nvidia Vetro Geforce 6800GT on E510? Need help setting up max displays MD 219 dual displays


... Max Displays MD-219 (Gray) 19 in. Flat Panel LCD Monitor

I recently bought an ASUS external monitor to use in parallel with my Gateway laptop. The external monitor will stop working (go blank, but remain on) after about 30 seconds when I plug it into my laptop's VGA port. The external monitor seems to work fine on other computers. Therefore, I am convinced that my VGA port is malfunctioning. What advice can you offer me?


Is it a BRAND NEW monitor? The only way to be SURE your VGA port is bad really, is to see if it does the same thing with a completely different monitor. What I'm getting at is it could be the monitor itself. Maybe the monitor has some kind of "sleep" ... Gateway FPD2275W LCD Monitor

X2Gen MW19V Greenish display


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... X2Gen MG19MY 19" LCD Monitor

Hp F 2105 MONITOR volume and sleep problem


... HP f2105 21" LCD Monitor

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Digital mode of VX2035wm has stopped working


I recognize the model number as a Viewsonic model. Check the digital input using another computer to make sure it's the monitor.If you're brave enough, do this:Open the unit and check to see if any of the\015 ... Gateway FPD2275W LCD Monitor

Acer AL1917W goes black


I have recently opened my AL1917 (not wide) but it should work the same. First remove the stand. This is done by removing the plastic cover over the stand hinge (which appears to be part of the back cover, but is'nt.) Mine was done with simple tum ... Acer AL1917W LCD Monitor

My compaq presario 5000 (5WV286)will not exit sleep mode.when i power up my computer the yellow light stays on my monitor. when i hooked my monitor to another computer the monitor works fine.The key board lights (Scroll lock/Number lock & Tab lock lights all work,but when I press the Sleep botton nothing happens...the light does not go on or off..what is wrong with my PC? Daniel


It looks like port on your PC where monitor connected gone bad, now you can double check this connecting your PC to another spare monitor not the one which is already working, even one more thing sometimes it does happen that cable you are using with ... Compaq Presario 5000 PC Desktop

Acer X193w-- input not supported..


Hello,This is likely a screen resolution issue.That monitor has a native resolution of 1440x900 (I used to have one). If the game is feeding the monitor too high a resolution, the monitor can't display it and.....input not sup ... Acer AL1916W 19" LCD Monitor

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

My HP 2009m goes into sleep mode & shuts down


I just bought a 20 inch HP 2009m monitor about 2 months ago.One of the functions within the monitor, is to go to 'Sleep' The Sleep mode is to keep the monitor active, but using very little power.(I always turn mine off w ... PC Desktops

Toshiba a135 laptop screen goes blank during battery use. only way to recover is to put the laptop to sleep blinking orange, and then restart. This action keeps the screen on. Could this be a bios problem? After recovery the power cord is plugged in and the situation never repeats during that session of running. This happens somewhat regularly.


You indicated that this ONLY happens when the battery is being used and does not happen if the power supply is being used. This indicates that battery may very well be the problem.More clarification ok? Do the following for me:\015\ ... Toshiba Satellite A135-S2276 Notebook

Cant do anything, I turn it on, get windows screen, next says windows restarting


With the hard drive removed power up the system and enter the CMOS setup utility. Make sure that it is working properly. If not then get an external monitor and plug it into the VGA port on your laptop. (should be D-shaped with 15 holes for pins). In ... Toshiba Satellite 5105-S701 (PS511U-02WYJX) PC Notebook

EMachine W3107 will not boot, no display.


Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

Gateway 900g Hi I have a Gateway 900g monitor that does not work. All was fine working until one day it just stopped working. It wont switch on or anything. I think it may be the power supply board but I cant seem to find one anywhere and I read that you fix them. If so then how much would that cost and how do I go about it. Regards Adrian


I'm writing this using a recently repaired Gateway 900g. You may be correct about the power supply, as that was the problem on this unit. There was absolutely no response with this unit. No blue LED, no dim display. Nothing.\015\012\0 ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3704 seconds