Having problems with your Compaq Computer Monitors ?

Monitor displays Msg. frequency out of range, screen is black

\015 I changed the resolution by mistake to the next size smaller then the monitor is set to \015\012when turn on the computer the desk top appears for about 30 sec. then the monitor screen goes black, then a small 3'' x 3'' window pops up and displays message as follows.\015\012\015\012FREQUENCY OUT OF RANGE\015\012RESET RESOLUTION OR CONSULT MONITOR\015\012USERS GUIDE\015\012\015\012I have tried to reset using the monitor menu but this does not work ,and I do not have a monitor guide any advice would be helpful\015\012\015\012Steve\015

Answers :

Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change your video settings so Windows will start normally with your monitor.
Repair Help & Product Troubleshooting for Compaq Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor displays Msg. frequency out of range, screen is black


Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change y ... Compaq Computer Monitors

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Frequency out of range


Try to set the monitor refresh rate to Adapter Default despite of Optimal or lower rate of refresh. For this first download the manual of your monitor and check what is the highest refresh rate your monitor can suport. Then goto the display propertie ... HP Compaq FS7600 17" CRT Monitor

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

Frequency out of range on monitor and blacks out but pc still running


You've selected a screen resolution that is too high for your monitor to display. You'll want to restart and run windows in safe mode with minimal drivers installed and change the settings back to a tolerable level.Never force a monitor i ... E-Machines eMachines Desktop PC

Emachine windows xp welcome menu comes up and then black screen and we have sound but no picture changed monitors still does the same thing.never been used for internet


Puddycat_196,Did you just performed a clean installation to your system? Or maybe you just replace a new video card? The blank screen normally caused because of the resolution setting which is too high for the screen to support, or maybe ... PC Desktops

Frequency out of range 11khz/ 119khz message


The PC is sending out the resolution that is too high for the monitor to handle, you need to set the resolution of the PC to be the native resolution of the monitor and set the refesh rate to be at 60Hz. ... Envision H191W Monitor

One more prob


Keep pressing F8 during the system boot up and select "safe mode" and press enter ...after you get into the safe mode then go tostart menu>control panel > system> hardware tabdevice managerin this go ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

When I switch my windows XP Home Edition on instead of the usual gradual build up to Desk Top & icon programmes etc. I get the usual large black screen but instead of the windows motif appearing I get a deep blue oblong about 6"x1" with a message ("OUT OF RANGE") (H:27.8K V: 61.9) The H27. 8K Flashing Red This happens every time when switching on and the only means of closing down is to turn the power off. I have a Lap Top connectd to the Desk Top


The results you are seeing are actually from the monitor itself. It's telling you the vertical and horizontal sync frequencies to help you troubleshoot your lack of display.\015\012\015\012You'd usually see this happen when someone has se ... Packard Bell PC Desktops

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Monitor not displaying


Sounds like your video adapter settings have been wedged. If you are running Windows XP Service Pack 2, you can use the following steps.\015\012\015\0121) Boot the laptop into safe mode. Boot into safe mode with networking support if possible. This c ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

Screen says "OUT OF RANGE H:27.8K V: 62.0 - Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor


That's the monitor telling you it's getting a signal it can't handle. The H and V values are the horizontal and vertical frequencies that control the display. They change depending on your computer's video card settings. The monitor can be damaged if ... Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor

My monitor is linked to an Apple minimac. The monitor says out of range and gives a V: frequency 9 8kHZ anf H. frequency 1 19 HZ what does this mean and how do I reset it?


The message that appeared in your monitor "out of range" and V: frequency 9 8kHZ anf H. frequency 1 19 HZ has something to do with the screen resolution. Meaning that the resolution set on the computer did not meet the required resolution of the moni ... Computer Monitors

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Phillips Brilliance 200W6 Monitor : Got power but black screen


... Computer Monitors

Over rang i have 15" proview crt when i start pc then display msg over rang for 9 sec. after this screen will be black.it can't open my bios screen.


On crt monitor adjust screen referesh mde to 75Hzor go to windows safe mod e\015\012You can see your monitor ranges ; \015\012right click desktop -> properties -> settings -> monitor \015\012You'll see Scr ... Proview PT 15.1" LCD Monitor

Hp 2009m screen goes black - no signal - Computer Monitors


Change frequency setting to 60hz from the option of graphic setting using another monitor then agin connect your problematic monitor.step1.open properties on desktop using right mouse click.step 2.goto last tab (setting)step3.goto a ... Computer Monitors

Dell Inspirion Laptop Screen Randomly Flickers, Then Blacks Out


If this laptop is only a few monthe old, then it should be still under warranty. I suggest you return it to the supplier for repair or replacement under warranty. If you try to repair it, most likely you wil void your warranty.\015\012\01 ... Dell Inspiron 1100 Notebook

Computer screen blank


Your operating systems is using a resolution out of your monitors capable range. Hit f8 during boot and select VGA mode. Once in change the resolution. OR Your operating system is using a different output. Once in VGA mode check the dis ... E-Machines eMachines Desktop PC

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Computer Screen turns black, Computer still runs.


Brownsterz,\015\012\015\012This sounds to me like the game, caused a fault in your video driver that somehow adjusted your resolution/refresh rate to something beyond your monitors range.\015\012\015\012If this is the case we ... PC Game Controllers

I was adjusting picture on monitor and now picture completely messed up


\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8713 seconds