Having problems with your Compaq Computer Monitors ?

Out of frequency range set lower resolution

\015 I have compaq presario amd processor computer and compaq 7540 monitor since last two days it shows a sign of '' out of frequency range\015\012set lower resolution, refer user monitor manual '' and screen goes blank after some time i tried to use mouse but no use or even buttons on monitor are not responding\015

Answers :

Reboot the system by pressing F8 if your using windows OS and select last good configuration.

you can try also selecting Enable VGA mode (press F8 while rebooting and select ENABLE VGA mode).

hope this helps, please rate.
Repair Help & Product Troubleshooting for Compaq Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Out of frequency range set lower resolution


Reboot the system by pressing F8 if your using windows OS and select last good configuration.you can try also selecting Enable VGA mode (press F8 while rebooting and select ENABLE VGA mode).hope this helps, please rate. ... Compaq Computer Monitors

Out frequency of range set resolution lower


... HP Compaq FS7600 17" CRT Monitor

OUT OF RANGE


Sounds like the Video setting is too high. Change the refresh rate lower and change the resolution lower. You monitor can't handle the setting that you have it on.\015\012\015\012I\015\012can't fix this for you, but if I helped you get it fix ... Toshiba Satellite LP154W01 Notebook

My LCD show me "Out of range" when it is loading the windows. I need the driver. Thanks.


Hello. In most Windows PCs today, there is not a big need for LCD Drivers, since most LCDs have a native resolution which the Operating System can support natively.\015\012\015\012The Out of Range issue appears when your resolution is set ... AOpen F2705 17" LCD Monitor

Emachine windows xp welcome menu comes up and then black screen and we have sound but no picture changed monitors still does the same thing.never been used for internet


Puddycat_196,Did you just performed a clean installation to your system? Or maybe you just replace a new video card? The blank screen normally caused because of the resolution setting which is too high for the screen to support, or maybe ... PC Desktops

My monitor is linked to an Apple minimac. The monitor says out of range and gives a V: frequency 9 8kHZ anf H. frequency 1 19 HZ what does this mean and how do I reset it?


The message that appeared in your monitor "out of range" and V: frequency 9 8kHZ anf H. frequency 1 19 HZ has something to do with the screen resolution. Meaning that the resolution set on the computer did not meet the required resolution of the moni ... Computer Monitors

OSD + GNR 19M1 LCD screen


Seems that you have set the resolution on your graphics card to a\015\012setting higher than the maximum resolution supported by your monitor.Try\015\012to boot into Safe Mode & lower the resolution of your graphics\015\012card. If not poss ... GNR 19M1 19" LCD Monitor

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Just got a hand me down Benq model t903 19


Quite the opposite -- your new monitor can't handle the screen settings that you're running on the old monitor.Hook up the old monitor and start up the computer so you're looking at a Windows desktop. If you have windows open, close them ... BenQ Computer Monitors

RESOLUTION NEEDS TO BE SET LOWER OR SOMETHING THE SCREEN SAYS!


So the resolution or refreshrate is out of range, and the settings need to be lowered. When the computer is starting up, before the windows logo comes up, tap repeatedly on F8 to get Advanced start up options on the screen.Select VGA mode ... Compaq Computer Monitors

Out of frequency range set low resolution or refer monitor manual


TO RESET IT START YOUR COMPUTER IN SAFE MODE AND GO TO DISPLY SEETTINGS SET YOUR MONITOR AT VERY LOW 32BIT 800 BY 600 PIXELS IT WILL SOLVE THE PROBLEM THAN RESTART THE COMPUTER ... Compaq CV 7500 17" CRT Monitor

''out of frequency range'' on crt monitor


Go into your "Device Manager" in Windows and find out if your HDTV monitor is still installed. Delete the settings under the monitor tab and reboot the computer. With any luck the reboot will cause Windows to re-detect your current monitor and instal ... Compaq Computer Monitors

Frequency out of range 11khz/ 119khz message


The PC is sending out the resolution that is too high for the monitor to handle, you need to set the resolution of the PC to be the native resolution of the monitor and set the refesh rate to be at 60Hz. ... Envision H191W Monitor

AOC 771S monitor always appear "not support out of range even if i already set my resolution to lowest.


The lowest resolution is not always supported. by the range maybe referring to the frequency. change that, that should work. if you are not sure, look at your monitors manual, it will tell you resolution as well as frequency optimal settings ... Computer Monitors

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.


It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

Always says: Auto Image Adjust


These are the allowable resolutions and refresh frequencies for your monitor.\015\012\015\0121280 x 1024 @ 60, 75 Hz\015\0121024 x 768 @ 60, 70, 72, 75 Hz\015\012800 x 600 @ 56, 60, 72, 75 Hz\015\012640 x 480 @ 60, 75 Hz\015\012720 x 400 @ 70 Hz\015\ ... ViewSonic VA703B LCD Monitor

I have a computer monitor that has suddenly gone to a black screen with this note: "out of frequency range set resolution lower or see monitor instruction manual. How do I do this if the screen is black?


If you have a video card in your PC shut down, remove the card and this should do it, if you want to install the card again, shut down re-install card, and it should also work ... Compaq CV 7500 (Carbon, Silver) 17 in.CRT Conventional Monitor

Monitor can not open


Usual cause is defective 5 volts 3 pin regulator.. ... Compaq V700 17" CRT Monitor

My Gateway FPD1775W HD Display TFT LCD Monitor is showing a "FREQUENCY OUT OF RANGE" box. It shows it at start up and I can't get into the computer to fix it. How do I fix this?


You need to get another monitor & lower the resolution it is set to high or sometimes (very rarely) to low for the hd display. ... Gateway FPD1775W Monitor

"OUT OF RANGE"


Hi,\015\012It is just that at the initial stage your screen resolution was a tad too high for the capacity of the monitor. As long as you retain the working resolution you should have no problem. To lower or increase, right click on any clear area o ... Soyo DYLM1798 Monitor

Says out of range when turned on


The default resolution for your video is set for some value the monitor can't support. You can try starting Windows in VGA mode. Press the F8 key several times when you turn the computer on and the manufacturer's logo screen appears. This will bring ... Northgate LPL17LCDMON Monitor

Moniter says out of frequency set resolution lower or see user guide


The settings you need to change are actually on the computer's video hardware. Assuming you are using a Windows machine, right click anywhere on the desktop. Select Properties, then the Settings tab. You should see a resolution slider that you can ... HP Compaq FS7600 17" CRT Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

RectangulaR box on my screen says: input not supported


If your monitor is displaying a message, that's good news: Your monitor is not shut. What the message is saying is that either the refresh rate frequency, or the resolution you have set your video card to on your pc/laptop, is too high for your LCD ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4395 seconds