Having problems with your BenQ FP731 - 17" LCD Monitor ?

Benq FP731 LCD not start up, only green power lamp

\015 My Benq FP731 LCD not start up, only green power lamp, no picture at all. I have tried to open the back cover to check what would be wrong. But after I removed all the 7 screws and the seat, I still could not open the cover. It was so tight. I had even opened ca. more than 1 cm slits, it automatically closed again after I released my hand. I am not sure should I apply more force to open it, or is there any screw more behind?\015

Answers :

Opening it will not likely solve your problem. Have you tried another monitor on the computer to see if the problem may be with the computer itself?
Repair Help & Product Troubleshooting for BenQ FP731 - 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Benq FP731 LCD not start up, only green power lamp


Opening it will not likely solve your problem. Have you tried another monitor on the computer to see if the problem may be with the computer itself? ... BenQ FP731 - 17" LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

I have a 3 yr Dell UltraSharp 1905FP LCD monitor. Recently, when I turn it on, the power on green light would blink continuously for about 1 minute with no picture before the light become steady green and have picture (everything working). Now it is up to 5 minutes. Other than waiting for the monitor to display the video, everything is fine. It acts like it is waiting for something to warm up. Does anyone know what is the problem? Thanks.


Yman1949, Your 1905FP unit is not working as it was designed to do! Here is something you can relate your problem to. The white light needed to see what is on your lcd panel is produced by "cold-cathode-fluorescent-lamps" (2) that require 600-1200va ... Dell UltraSharp 1905FP 19" LCD Monitor

My 15" LCD monitor TTX went to sleep mode and never return back


Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Where can I find instructions on replacing the backlight on benq fp731?


Jsiwiec, Are you absolutly certain that the "cold-cathode-fluorescent-lamps" need replacing, or if the "switch-mode-power-supply"/"CCFL inverter supply" is not working and is in shutdown mode? CCFL's are not some kind of miniature version of those en ... BenQ FP731 - 17" LCD Monitor

No picture or power green light just blinks - Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor


Carrizosas, Tell me more. How old? Approx. total "ON" hours of use? Did it display a "bright, crisp, full color text and graphics and pictures the day before? Does this unit have a lay on floor "BLACK BRICK" ac to dc supply, or only a 3 wire line cor ... Sceptre X9G Komodo II (Black) 19 in. Flat Panel LCD Monitor

Monitor Goes black, or flickers on and off


The high pitch sound is coming from the inverter. It is faulty and needs to be repaired or replaced. The inverter supplies high voltage to the CCFL lamp, this lamp gives the backlight to the LCD so you can see the LCD images.\015\012Check out L ... ViewSonic OptiQuest Monitor

The monitour will go from green light to orange after sitting for about 10 or 15 min. you move the mouse and it does not go from orange to green. you have to restart the computer.


Lower down the computer resolution and frequency rate from Video setting>>Advanced in control panel (personalize on Vista) replace the video cable.If that does not help then the monitor is defective.If there is a flashi ... Computer Monitors

Power light flashes yellow then green


I used to repair LCD monitor from\015\012Dell. It works. Most of LCD monitor brand have the save main components such as CCFL lamps, inverter board, power board. You might be using these following steps to examine what\015\012wrong with your mo ... Balance CM2015 15" LCD Monitor

The blinking green light on VX922


If there is a flashing led on front of the monitor, that indicates a fault condition.\015\012\015\012\015\012\015\012The flashing light indicates a diagnostic state called protection.\015\012\015\012When the Monitor goes on protecti ... ViewSonic VX922 19" Monitor Flat Panel

Alright so, i've had the same monitor for the past 4 years, no problems at all (starlogic 17" LCD) and today it decides to start turning off and on, with a very distorted computer screen when it is on. now im sure its the monitor acting up and not the computer. i've heard that LCD monitors dont go out for 20 years, and im wondering if it could be just the power supply because it turns off and on without it connected to my computer.


If you mean that it powers on and off without being connected to a computer, it could well be the power supply or the power switch. If you mean that the indicator lamp switches from amber to green without being connected to a computer, it could eith ... Star Logic Monitor

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook

BenQ FP71G+ power supply problem


I checked all what is explained here but, first, all the components are ok, then my problem is a little bit different from this.My monitor (Benq FP71G+) turns on perfectly but after about 1 hour or less the LCD panel turns off (so backlight and ... BenQ FP71G 17" LCD Monitor

BenQ FP731 Screen briefly displays then turns off


Did an independent diagnosis before finding this, and came to same conclusion. First found fuse PF751 was open circuit (3A black plastic fuse, not glass) over close to main heat sinks. When I replaced that with a fine fine strand of wire (for test ... BenQ FP731 17" LCD Monitor

Help i have a e17t4 monitor and i have pluged it in to 2 computers same thing happens on both comps i pluged the monitor to power i get blue lite then solid greenand stays green i can turn it off and onat this point but when i pluge it in to the computerafter sitting awile it comes on normale and shuts off and you cant turn it back on un less u un plug it for a while and then it will do the same thing


Hi crabguy,To my understanding, this is a common problem with some eMachine monitors (including the E17T4) since its production start sometime 2004/5.Your particular concern could be due to several possibilities:1. faili ... ViewSonic VA720 17" LCD Flat Panel Monitor

BenQ LCD 17 inch Monitor


I wonder if this has a backlight in it. Most/or all LCD flatpanel displays use a backlight in them, namely a small florescent tube (a tiny version of the office florescent lights). If this is burn't out, or the little power supply which runs it dea ... Gateway FPD2275W LCD Monitor

LCD monitor display is not appearing


Hi,It would seem that you are on the right track. If the desktop could be seen (albeit very dark background) then it could either be the CCF Lamps (cold cathode florescent) or the inverter that powers the lamps. One way to verify is to sh ... Acer AL1714 17" LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Keeps blinking out to a black screen


Hi,If the power light stays on and the unit works even if for just a moment, then chances are that you either have a cold solder, or a heat problem with some components or your CCF Lamp is starting to fail.All possibilities re ... Computer Monitors

Screen displays fine for a second, then goes blank


Dor, BenQ has a 3yr warranty on their monitors. I would contact their tech support and receive an RMA to return it for repair. It will cost you shipping out there but they will ship it back. I has a BenQ FP731 myself and it blew a capacitor inside ... BenQ FP737S-D 17" LCD Monitor

Won't follow through on start-up process


If you hear the hard drive spinning and you think Windows is working but you can't see an image then :-You could have a defective screen - a defective inverter or a CCFL lamp or simply the video cable needs reseating. After reseating the video ... Dell Inspiron 1100 Notebook

My acer travel mate 5710 just blipped and closed down. NOw will not even switch on. any advice how to fix? The green power light does show for one half second when I press the button but does not function to 'on' mode.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

Gateway (FPD1830) LCD Monitor


It can be bad caps in the power supply, bad inverter circuits (check the green color fuse (F1, 4A 125V) close to the heatsink and a trim pot), bad inverter transformers, bad lamps.\015\012You open it up using flat blade screw driver starting al ... Gateway FPD 1730 17 in. Flat Panel LCD Monitor

My nc8000 shuts down after few seconds and starts after power plugged in or battery inserted


Hi Turecki, It's a moderately easy fix for this common issue with HP/Compaq Laptops. Simply go to ebay, purchase an "inverter" board built for a NC8000 laptop can range from $10-$50 just purchase one with a minimum 6 month warranty. Its about a 0.5 ... HP Compaq Business nc8000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8293 seconds