Having problems with your BenQ FP557S (Silver/White) Monitor ?

I have problem with BENQ Fp557c monitor(Q5C3) model.No display.When power on monitor light remains yellow.then PC swich on it turns blue(Same as Green.VGA data OK)I check Monitor mother board for burns.No any mark.Fuse also ok. Any suggestion for solve this problem

Answers :

Repair Help & Product Troubleshooting for BenQ FP557S (Silver/White) Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trubleshoot Motherboard what is mother board prob and how can find n fix them....

More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

Emachine T2958 will not turn on - has no power

Dear asksforhelp,\015\012\015\012As u have told that u have change the power cord then the second thing u can try that check the SMPS is it working or not to check this u have to know that where is the SMPS where u pluged in the power cor ... E-Machines (T2958) PC Desktop

I have problem with BENQ Fp557c monitor(Q5C3) model.No display.When power on monitor light remains yellow.then PC swich on it turns blue(Same as Green.VGA data OK)I check Monitor mother board for burns.No any mark.Fuse also ok. Any suggestion for solve this problem

... BenQ FP557S (Silver/White) Monitor

I got problem with dv2000 HP laptop, I got very dim windows, I have change inverter, monitor, and check the lid switch, still have some problem,when connect to external monitor, everything is OK, could you tell me is there any wrong caused by mother board?? Tks a lot!!!

IT's the GRAPHICS CHIPSET ON THE MOTHERBOARD.ive ran into simular casses where" DV2000 notebook by HP has some serious issues. I just recently picked\015\012this laptop up from a customer who wants me to fix it. And to be hone ... PC Laptops

I moved my computer to a new location. It is all plugged in correctly and I am connected to the internet but I get a No Signal blue box on my monitor and the yellow light is on. It is an ASUS computer and a Nuevo monitor. Is it in sleeper mode? How do I correct the problem.

You explanation needs some more detailing. However here I am assuming, that you are having problems starting up your computer. Considering the fact, that you had moved your computer to a new location and that it was working perfectly before t ... Computer Monitors

Hp f1703 with speaker power supply now speakers don't work

This might be the problem of some short circuits .... check if all the connections recieve electric supply properly . then disconnect everything and reconnect and see ... it'll work ... HP Pavilion F1703 17" LCD Monitor

When i login my computer I just get black screen try to reset or confiuate says primary and scondary drive 1 not found

HI Dear, This is a hardware related issue. This might be due to following problems : 1. The data cable that connects your hard-drive to the mother board might have picked up some fault. 2. The mother board is not w ... Dell Dimension 2400 PC Desktop

Data is not sent to the monitor

The first thing to do is to pay attention for "beep" when your press the power button (or the reset button) to turn the computer on or reboot it. The beeps that a PC makes tells you a lot about the state of your computer. I couldn't quote for you the ... Dell OptiPlex GX110 PC Desktop

My 110v PC was plugged in 220v

There is no such thing as plugging something into 220v. That is the voltage at which your power supply will provide power to your computer. What you did was give your computer more power than it needed and you most likely burned out the mother boar ... E-Machines eMachines Desktop PC

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Hi Master, can you help me how to fix mag innovision model 468P when i turn on the monitor in a second the monitor will automatically off display and change the light power from green to orange.? please help me to fix this problem appreciate your help thanks so much master

From green to amber could be one of many things,1 video grapics card malfunction,,,2,, dry joints in the mother board..3 bad data cable ,,pc to monitor cable vga,,failing power supply,,,,i suggest you open the pc remove the data cable to you floppy ... Mag Innovision 771fs-s 17" CRT Monitor

No color red displays.

If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Pc starts and runs but wont boot up monitor shows no signal

1) When you turn on the computer, watch and listen for: a) power supply fan, (power is on) b) chassis lights (power is on) c) ticking sound during memory test (the BIOS POST is running) d ... HP PC Desktops

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.

OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Asus p5b-mx motherboard no display no beep

When ever you are getting the beep messages after you remove the ram card and connecting the tower to the power cord it shows that mother board is functiong normally so no problem with the mother board .try this steps so that it may resolve the issue ... E-Machines eMachines Desktop PC

I have a problem of motherboard Motherboard has power but cant come display. My friend suggest me in the motherboard jumper move it but i cant know which jumper to remove?

Jumper is a on cornor side of motherboard and is used to reset bios.....\015\012\015\012trying to move jumper may not solve your problem ..... \015\012\015\012if u hear a tone continuesly then it will be ur ram problem..check your ram and ... PC Desktops

Display issue with Viewsonic VX2025wm display

This could be a few things so we'll start with the cheap and easy one.\015\012\015\012The first thing we want to check is cables and connections. First just grab the data cable at one end and gently move it it around while watching the di ... Computer Monitors

Video Display Problem

Thats because its all onboard and you have to replace the mother board. Its probably the screen, not the video card seeing as how external displays work fine.\015\012\015\012Most likely over heating or damage to the screens data ribbon th ... HP Pavilion ze2000 Notebook

Dell Dimension 5100 will not power up. Was working fine, turned power off, will not turn back on. Power supply tested OK, tried different power switch and ribbon cable connector, replaced mother board battery. Nothing worked. LED on motherboard indicates power.

Have you checked your monitor? Try your monitor on another PC and check it is OK. Once you change the MB battery you effectively "Kill" the PC, as all the settings in the BIOS are removed and must be reprogrammed. You must enter the BIOS, and select ... Dell Dimension 5100 (D51L1) PC Desktop

Screen just showing white.

This is definitely a problem with the monitor ONLY. The fact that you don't even see the Gateway splash sign when you power on the monitor or even the symbol indicating, which source you are using is very telling.This sort of problem usua ... Gateway HD2200 LCD Monitor

SCREEN turning to black and wont stop?

Hi,\015\012 *Before installing games, check about the system requirement for that particular game. If your system suits then install that game.\015\012 *Check the monitor by unistalling some games for one or two days, if thi ... Intel Pentium 4 1.7G, 1.7 GHz (p41700400256sk478) Processor

-computer has gone blank

This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

Hewlett-Packard vs17 half fixed, what to do next?

Hello,I have also seen this type of problem. Have you checked the large caps on the inverter board, no just the power supply board? Many LCD monitors have 2 caps on the inverter and I have had to replace them from time to time. The next t ... HP vs17c 17" LCD Monitor

Broken LCD Backlight

Dtoreilly, You will need to check all the Electrolytic Capacitors. Here is what I found. I measured some units on a Stanford Research Systems SR720 LCR meter. Units are CAPXON #1 2200uf @ 16v now 119uf\015\012 ... Westinghouse L1975NW Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1448 seconds