Having problems with your Belkin PC Desktops ?

Unable to connect through a N1 Wireless router with more than one user using a IPsec connection. Only one person can cannot and the other gets a timeout.


Answers :

In order for the laptops to see each other and allow you to work one with the other a network has to be installed and a work group formed.
\015\012
\015\0121. Choose Start --> All Programs --> Accessories --> Communications --> Wireless Network Setup Wizard.
\015\012The wizard shows its splash screen.
\015\0122. Click Next.
\015\012The wizard asks you to type in a name for your network.
\015\0123. Type a name for the network.
\015\012The name of the network is used for the wireless router's SSID (Service Set Identifier), which the wireless box typically broadcasts to make it easy to connect. The SSID is the name that appears when you try to connect to a wireless network. Each wireless router has a default SSID: tsunami, wireless, and linksys are all common default SSIDs.
\015\0124. Unless you already have a network key that you absolutely must use, select the Automatically Assign a Network Key radio button.
\015\0125. If your wireless base station and all the wireless cards on your network support WPA (if you have 802.11g, they may or may not; with 802.11b, it's unlikely), check the Use WPA Encryption box.
\015\012There is a performance hit for using either WEP or WPA encryption. Your network will run slower — but your neighbor won't be able to look at your files. Fair trade, eh?
\015\0126. Click Next.
\015\012Behind the scenes, the wizard generates all the information it needs to set up a secure wireless network.
\015\012The wizard asks if it can use a "key drive" (USB flash drive) to set up the network.
\015\0127. Select the Use a USB Flash Drive radio button.
\015\012Select this button if you meet the following requirements:
\015\012• You have a key drive (USB flash drive) handy
\015\012• A free USB port is on every computer on your network
\015\012• All of the computers on your network are running Windows XP Service Pack 2 or later
\015\012• Your wireless router has a USB port and it understands WSNK (check the manual)
\015\012If you don't meet those requirements, then select the Set Up a Network Manually radio button. Then click Next.
\015\012• If you click the first button, the wizard takes you through the steps to transfer the settings to all the other computers on the network, as well as the wireless base station. Basically, you schlep the key drive to all the PCs, and they set themselves up.
\015\012• If your hardware isn't quite up to the **** Tracy stage yet, the wizard shows you its final instructions.
\015\0128. Click Print Network Settings.
\015\012The wizard doesn't actually print them. Instead, it opens Notepad and sticks the relevant settings in a new text file.
\015\0129. Print the text file and follow the instructions to transfer the settings to each of your wireless devices manually.
\015\012It isn't as bad as it looks. See the next section.
\015\012Making manual changes\015\012So you're stuck with entering wireless network security information by hand. Be of good cheer. The Wireless Network Setup Wizard (see the preceding section) does all the heavy lifting. If you're running Windows XP Service Pack 2 or later, it's pretty easy:
\015\0121. Enter the new settings in your wireless router or access point.
\015\012Unfortunately, each one is different. You may have to dig into the router's manual. Usually, once you get inside the router, making the changes is easy. The key you need to enter is the one that was generated by the Wireless Network Setup Wizard.
\015\0122. Make sure you update/apply/save the changes to the wireless router before leaving.
\015\012Many routers require you to save the changes manually, so they'll be around if the electricity goes out.
\015\0123. Choose Start --> All Programs --> Accessories --> Communications --> Wireless Network Setup Wizard.
\015\012You see that really confusing splash screen again.
\015\0124. Click Next.
\015\012The wizard asks for a network name.
\015\0125. Type the network name precisely the same way that it appears in the printout from the preceding section.
\015\0126. Select the Manually Assign a Network Key radio button and click Next.
\015\012The wizard asks you to type the key.
\015\0127. Click Next.
\015\012You end up at Step 7 in the preceding section, from which point you can print your settings or just close down the wizard.
\015\0128. Repeat Steps 3 through 8 on each computer in your wireless network.
Repair Help & Product Troubleshooting for Belkin PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Unable to connect through a N1 Wireless router with more than one user using a IPsec connection. Only one person can cannot and the other gets a timeout.


In order for the laptops to see each other and allow you to work one with the other a network has to be installed and a work group formed. \015\012\015\0121. Choose Start --> All Programs --> Accessories --> Communications --> ... Belkin PC Desktops

Cannot log on at all on my acer laptop can anyone help?


I assume u r using winxp.\015\012As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by \015\012a little known access hole in Windows XP.\015\012This method is ... PC Desktops

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Cant remember my password to my master screen name


Password Recovery.\015\012Can't Log On to Windows XP?\015\012If that’s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but ef ... PC Desktops

Forgotten Password need help to unlock my laptop I forgot my password


Good.\015\012If that’s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access ... Acer Aspire 3690-2196 Notebook

I can log in to my computer i for got my password


Assuming you are talking about logging in to Windows XP here are some things you can try:\015\012Windows XP Home Edition or Windows XP Professional in a workgroup\015\012loadTOCNode(3, 'whattotry');\015\012\015\012\015\012\015\0121.\015\0 ... Compaq PC Desktops

I can re boot boot my compaq persario V6000


Only a HDD with a properly installed OS, a valid boot sector and an active partition will 'Boot' Did\015\012it ever work? Are you sure the POWER is there. Are you sure the cables\015\012are on right and the HDD is identified in the BIOS o ... HP Compaq Presario V6000T PC Notebook

I forget my computer password thatn is administator password in h


. Place your Windows XP CD in your cd-rom and start yourcomputer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)2. Keep your eye on the screen messages ... PC Desktops

Gateway GT4022 has issues powering up and restarting


1.Yes the Power On switch is okay. (PS. If you hold down the Power On button for 10 seconds on any computer, it will turn off)2.The heatsink held down by springs on the Northbridge, and Southbridge chipsets, is an excellent idea. Wo ... Gateway GT4022 PC Desktop

I forgot my admin password and when computer boots up i cant get in and do not have any other user accounts setup. how can i reset password. I have a Compac NC6220


Hello there cimaronw_tc_\015\012\015\012This reply is composited from a couple different draft-stage "Tips & Tricks" articles I'm in the middle of developing. Given your (and so many others) dilemma, I don't have the hea ... PC Laptops

Loading some DVD's


I'm getting this information right out of the "Windows Vista: The Missing Manual" and it does point out that there are compatibility issues if not burned properly or with the wrong format;If you format with the Live File System Format you can t ... PC Laptops

1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.


This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook

Vista wont let me log in


How to Fix the Error "The User Profile Service failed the logon. User profile cannot be loaded."\015\012Information. When you log on to Vista using a temporary profile (user account), you receive this error message:\015\012For more information, KB947 ... PC Desktops

Forgotten password cannot logon to window


Please read carefully the following steps. You may need to print this.1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your ... IBM ThinkPad 600 E Notebook

PC Running on the HP Recovery drive vice normal drive (C:)


I don't know if you have already solved this problem but you can do a destructive recovery from your recover drive which allows you to partition the other drive same as the CD though purpose of the recovery drive is to restore your computer without u ... PC Desktops

System password i am the admin on my pc and i have changed my password this morning and now cannot get into the system as i have forgotten it.. is there a solution to this problem as i am currently getting very stressed trying to guess my new password


Hi,\015\012here is the solution for ur problem gary, you just need windows xp cd with you, in order to solve this problem,its a best possible way to resolve this problem for new bee. You need to go this link through internet explorer: ... HP Compaq Presario C500t Notebook

When booting up, when windows is finished I cannot work mouse


Dear sir \015\012\015\012As it happens I still need some clarification what you were doing just before this incident happened but i will provide you a solution which might help you \015\012\015\012\015\012ASSUMPTIO ... Toshiba Satellite A105 Notebook

Internet explorer will not allow to go to secure settings


Cause:\015\012\015\012Keyboard issue\015\012Miscellaneous corruption\015\012Corrupt boot.ini file.\015\012Missing boot.ini file.\015\012Missi ... Gateway GT5656 Desktop PC

Sons laptop my son has been messin on with the settings in control panel and made himself the addminister but now he's forgot his user password and we cannot get on to his computer how can we fix this PLEASE HELP......


Well, here is a tip from someone:\015\012http://pubs.logicalexpressions.com/pub0009/LPMArticle.asp?ID=305\015\012or, you can bu ... Acer Aspire 5720 6497 Laptop

Madame, Sir, I subscribed for CorelWindvd9 after a month trial. I payd 29 ? for it, but I cann't open the programm. An additionnal key is asked after de seriesnumber is submitted. I deleted all of the files with windvd, but now I cann't install the package anymore. Do you know is this firm Corel is a serious firm? And does anyone have a solutions? Thanks a lot, greetings from Belgium, Marianne Verhamme


Hello and welcome to FixYa . In order to re-install WinDVD 9, remove all traces of WinDVD manually only delete the folders if they exist, and if allowed.If you cannot delete a folder, try renaming the folder by adding .old to the name of the folder. ... Corel WinDVD 9 Full Version for PC

Compaq Presario 5000 mv740


Well XYZ if you had XP already on your computer and it worked, then there is no reason to go back to Windows Me 2000, but you do need to get ahold of the person who installed the XP version and have him reinstall it. You will have to Activate that on ... Compaq Presario 5000 PC Desktop

User profile cannot be loaded


Hi,\012The instructiond were clearly givn in this link with images : http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlSTEP ONE:Logon to the ... Dell Inspiron 1521 Notebook

Network Timeout error.... Going crazy! - PC Desktops


\015\012Hi \015\012\015\012I am assuming that you are using a router/firewall for your home network which is hooked up to your modem or probably a combo of both. First of all if the problem persists you have to make sure that your ... PC Desktops

Neighbors dogs digging under fence and sliding under gate.


Have you tried talking with the neighbors?\015\012You could get a local welder to tack something to the bottom of that gate so it won't have room for them to crawl under, if that will not impede its swing. Should be quick and simple, for the r ... Acer Aspire 5002WLCi Notebook

User name and password


Can u tell me u r login with which user id;\015\012restart system in safe mode,if logging with normal user id first login with administrator > open my computer > c drive>document and setting folder > select profile folder and delet ... HP Desktop Computers - Hewlett-Packard 3.0GHz Intel Celeron D 160GB Desktop Computer with DVD+/-R/RW/CD... (A1110NPX743AA)
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9691 seconds