Having problems with your Balance CM2019 19" LCD Monitor ?

Signal not in range-have to restart - Balance CM2019 19" LCD Monitor


Answers :

Your resolution is set too hight, reboot computer pressing F8 untill you get a list of start up options, one of these will say start in safe mode, press enter on this and allow the computer to boot up, once it has finished,right click my computer click properties then click on hardware then device manager, click on display adaptors then right click on the adaptor in the list and click uninstall, close everything down and reboot the machine. when it boots backup it will reinstall the drivers automaticaly and set to a lower resolution,
Repair Help & Product Troubleshooting for Balance CM2019 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was adjusting picture on monitor and now picture completely messed up


\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

I have a desktop pc HP Pavillion a6600f. When i power on the computer i get a blank screen. The monitor says no signal going to sleep. So far I have changed the graphics card, Switched the ram to different slots, and removed the cmos cell. I am open to any more suggestions you have for me. monitor is good i have it hooked up to another computer in front of me please help! operating system windows vista home premium 64. installed update then shut down computer when tried to restart nothing


Perry7575\015\012\015\012Most likely the problem is with Windows its self. I am not sure what is exacting happening but I have been seeing alot of this lately. Something is causing something with the video to get out of wack. I have fi ... HP Pavilion a6600f Desktop PC

Signal not in range-have to restart - Balance CM2019 19" LCD Monitor


Your resolution is set too hight, reboot computer pressing F8 untill you get a list of start up options, one of these will say start in safe mode, press enter on this and allow the computer to boot up, once it has finished,right click my computer cli ... Balance CM2019 19" LCD Monitor

My monitor ( with less that 6 months use) has been going off while someone is using it--- says out of signal and i have to restart the comouter... and this is not stopping even with a restart


Julezj, You will need to connect your monitor to a KNOWN GOOD pc that DOES NOT have the screen saver set to do a time out when the keyboard is inactive. Whenever you state a problem with a monitor on fixya, please mention the monitor technology you a ... Gateway Computer Monitors

I need to find the VGA controller for the Dell 2005FPW monitor


You can use on all vga cards(you dont need any special controler), this monitor has a USB hub\015\012and its is detected normaly on winxp or above, and the vga cards detect the monitor auto.\015\012i give you the monitor ... Dell UltraSharp 2005FPW 20.1" LCD Monitor

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Input Signal Out of Range


I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

Balance monitor all color flushes and flashes with pic host link


Sounds like the lcd on your monitor is bad. This link shows how to replace one:\015\012\015\012http://www.fonerbooks.com/laptop_4.htm\015\012\015\012The link shows a laptop, but it's pretty much the same as with your monitor. The hard part is findi ... Balance CM2017 17" Monitor

INPUT SIGNAL OUT OF RANGE


Some how your screen resolution has changed above or below what your monitor can display. you need to boot your computer using another monitor that can work with the resolution your computer has switched to(i used a spare crt monitor when it happened ... Relisys TL775 17" LCD Monitor

I need to know if there is still some were to purchase and Ac Adapter for a Balance LCD Monitor CM2019?????????


Novicracker, If you can't get an OEM (black-brick) "switch-mode-power-supply" from BALANCE you will be forced to RESEARCH all the information that will be needed to order up a suitable NON-OEM replacement supply. You and only you can LOOK at the rear ... Balance CM2019 19" LCD Monitor

Out of range


You can try removing signal cable from pc.If it still says "Out of range" most probably main logic card or interface board as it is known in the lcd monitor could be defective.If on the other hand removing the signal cable gives message No signal ,ca ... ViewSonic VX924 19" LCD Monitor

Problem for LG 22" FLATRON Widescreen LCD Monitor LCD Monitor My monitor says analog power save and shuts off. Day before Yesterday I bought a new computer. I got the above mention problem on by monitor mostly when I connect it to UPS. But after that when I connect the monitor to mains the problem still remains. I have to restart my computer. Also before I bought the UPS on main power supply it gives same problem. Asha Joshi


The monitor is going itself to the Power Saver mode.It is not a problem of the monitor.This happens when there is no signal on the monitor.The monitor will display properly when there is an output signal on it.Please connect it to the computer and ch ... LG 22" FLATRON LCD Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

I'm having problem with my 16 inch CHIMEI LCD monitor flat screen, first when i booted up my computer it was fine, then i just defrozted my computer(because my computer has a deep freeze program)and then restarted it, when it was restarting THE NO INPUT SIGNAL APPEARED and the light on the monitor turn to orange, i tried restarting the pc but its the same, i check the cables and still the NO SIGNAL input wont go, and my monitor wont wake up.. NEED HELP PLS.. thanks..


In my opion deep freeze (pige head)is not good progrram .itt creat big problem. we should know well how can be use it. once a time u should reinstale it or formate ur computer,i hae facing many problem from my custmer. -----thanks\015 ... Chi Mei Corporation 221A Monitor

No RGB imput signal


I am having a problem with my LCD Balance Monitor as well. I have both cables for the Monitor hooked up. ... Balance CM2015 15" LCD Monitor

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

RESOLLUTION ISSUES OR GRAPHICS CARD UPGRADE?


Can you please put forth the problem in minimal words? ... HP Pavilion a6650f Desktop PC

Viewsonic VG919S 19" LCD


Hi\015\012\015\012You must focus to mainboard of LCD monitor find the voltage regulator IC. Voltage test the regulator IC use digital or analog multimeter range 10v dc connect the negative to cold ground, these regulator providing a const ... ViewSonic VG910S (Black, Silver) 19" LCD Monitor

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed


Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

Need a driver and users manual for mag innovisionLT576s


\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012 \015\012\015\012ViewSonic (HASU05F)\015\ ... Mag Innovision LT576s 15" Flat Panel LCD Monitor

Balance lcd monitor cm2019


... Balance CM2019 19" LCD Monitor

PCV-RS720G Sony Vaio : BFG 5500 installed and wont display


Hi thereBoot up in safe mode, F8 on start up, if it lets you into windows, go to the device manager and uninstall the graphics drivers, then reboot the pc, let the PC detect the new card and try install the drivers, have your driver CD in the C ... Sony VAIO PCV-RS720G (027242658103) PC Desktop

Something akin to background hash marks jump about 3/4 of the way up the screen on my Hanns-G 28" LCD monitor. I have had it for about two years and this did not occur until recently. I purchased a new video card but the problem persists. Additionally, when I power down the computer sometimes the monitor goes black before the log-in screen appears. the LCD indicates no signal. Computer restarts fix the no-signal condition, but the flicker problem persists. It is not always there and from time to


You either have cold solder joints or a Leaky capacitor and maybe a capacitor fixing to open up if you remove back to your monitor look at the caps see if any of them are puffed up on top if so replace them for Parts Call Mats Electeonics 1-800-628-1 ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6373 seconds