Having problems with your Averatec 4200 Notebook ?

Monitor receives no signal from PC. Connections tested : OK

\015 I need a driver for a TFT LCD TV/PC MONITOR to be conected to AVERATEC 4200 laptop\015

Answers :

You should not need a driver for that. If there is a plug on the laptop to connect the monitor, simply plug it and reboot.
You probably need to use some key combination to activate the external display. Mostly "Fn" + one of the function keys (it will have a monitor shown on it).


Repair Help & Product Troubleshooting for Averatec 4200 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

Problem with the monitor


Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Hello, I have a Gateway model GT5662, stock setup - Will not boot


Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

Nothing comes up on the screen


The monitor connected to the system is set to receive video signals from the DVI port on the video card and it is not getting a signal.\015\012\015\012Possible Causes:\015\012\015\012Monitor is connected via VGA ... Dell OptiPlex GX280 PC Desktop

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

BenQ FP241W 24" inch problem with HDMI connection


Sounds like the HDMI port on the monitor has been shorted out.\015\012There are very small fuses on the video board that can be changed, but they are fiddly and you may end up doing more harm then good if you are not sure what your doing. ... BenQ FP731 17" LCD Monitor

TFT Monitor Dislay fault


This is a hardware issue with the monitor. I hope you kept a receipt with contact information for the seller. Make sure the cable doesn't have any bent pins too on both ends. ... Gateway FPD2275W LCD Monitor

Emachines WHEN I TIRN ON THE COMPUTER IT SAYSSELF CHECK YOUR AND SIGNA CABEL MONITOR IS WORKING


This could be a fualt with either your monitor, graphics system or cable\015\012\015\012The monitor is reporting that it is turned on but not receiving a signal from the Pc it is connected to.\015\012\015\012Check that your PC is powering on (the bas ... E-Machines T2240 PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Samsung 940B monitor, 14 months old. Power light on when connected to PC, but no images, not even menu or Digital/Analogue prompt. PC recognizes the monitors presence,any ideas please?


Monitors are passive components in a computer system. These just receive signal from the CPU. You may find another CPU and connect your monitor to it to test if it really doesn't work. If it works, this may just mean that your video adapter has a pro ... PC Desktops

EMachine stopped displaying video (card not working, just mobo)


Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

I have a 15 inch dell monitor that will turn on then go immediatly black. if i turn the power off then on again it will turn on and then go black again? please help.


Hi, do you have another monitor you can test with? That behavior is normal when the monitor isn't receiving a signal from the cable or video card. The easiest way to test this would be to connect a different monitor to the same cable and see if it ... Dell E152FP 15" Flat Panel LCD Monitor

Monitor receives no signal from PC. Connections tested : OK


You should not need a driver for that. If there is a plug on the laptop to connect the monitor, simply plug it and reboot.You probably need to use some key combination to activate the external display. Mostly "Fn" + one of the function keys (it ... Averatec 4200 Notebook

Gibberish + won't finish loading Windows


Remove the new memory first. if that does not help you may have some a virus, indicated by safe mode workng fine. One other thing i found would do that is a damaged Hard drive, not to likely here because safe mode works. ... Dell Dimension E521 PC Desktop

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

No signal - ViewSonic Computer Monitors


You don't specify what kind of monitor, CRT, LCD, or even a TV attached to your system, you're using. It's likely the monitor is set to receive a certain kind of signal (either analog or digital) but it's receiving the other one instead. Before proc ... ViewSonic Computer Monitors

The monitor starts up displaying no signal


This means that the monitor is not receiving a video signal from the computer. When it doesn't receive a signal, it goes to sleep. You should check to make sure that the video cable is tightly connected, and also, if you have another monitor around ... Hanns.G Corporation HW191D 19" LCD Monitor

No signal The TV stopped showing a program and on the screen it read, "no signal". In the household there are two other TVs that operate OK. This is a cable TV setup. Checked the cables and they are all connected firmly


This problem requires you to test both the monitor and the signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the ... Envision 19" Widescreen Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

No signal to monitor


If u have a two VGA output in ur PC..try to use the build in VGA port...if doesn't appear... Try the one VGA port ... PC Desktops

Monitor receiving signal, but no image


Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another. ... Acer AL2416W Monitor

Router problem. Time Warner had a internet problem last Sunday, April 26 here in the Northeast. They fixed it, but our internet still didn't function properly as it did before the TWC problem. Very slow connections and timing out most of the time. Talked to TWC tech person, and found out that internet was fine to my main computer, but when the router was hooked up the problem came back. Netgear WGR614 v4. Only thing TWC said was to try and change channel. We tried but problem still exists.


Wireless Connection Drops with Windows XP Service Pack 1\015\012 \015\012 Problem:\015\012 \015\012var js_3;function initPsDisplay(){js_3 = new PsDisplay({"info":{"controller_name":"PsDisplay","name":"PsDisplay ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7951 seconds