Having problems with your ASUS LCD Monitor ?

Cannot increase resolution from 800x600

\015 I have ASUSVW161D monitor fitted with 810 chipset motherboard in Intel pentium 3 CPU. The resolution does not go beyond 800x600. How to increase it to 1024x800?\015

Answers :

You are most likely missing the video card drivers from the computer. you can get them from the makers website.

Or if you know exactly what video card you have you can look for the drivers on

www.nvidia.com for nvidia cards
www.ati.amd.com for ati cards

Check the graphic drivers are installed or not
Repair Help & Product Troubleshooting for ASUS LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No matter what I do with the settings, I cannot get webpages to show the whole page at once. There is almost always a side slide bar and bottom slide bar. If I choose 'smallest' for text size, it will all fit on the screen, but then the text is too small to comfortable read. This also makes games hard to play since we can't see the whole screen without scrolling. Any suggestions? Thanks!


HI,\015\012\015\012You have increase the resolution, to enable viewing all the content in single page without slidebar..\015\012\015\012Screen resolution is down to personal preference, and will depend on the size and capabili ... Acer AL1912 19" LCD Monitor

Cannot increase resolution from 800x600


You are most likely missing the video card drivers from the computer. you can get them from the makers website. Or if you know exactly what video card you have you can look for the drivers onwww.nvidia.com for nvidia cards ... ASUS LCD Monitor

I've been trying to use s-video cable to connect


\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.


No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Out of range in this wyse how to rectify - WYSE WINTERM 9150SE


This message means your monitor cannot display the signal provided, you MUST set the Video Resolution on your PC, to a Lower setting. As whatever it is set to is too high. Try 800x600 32 Bit to start and increase afterwards. ... WYSE WINTERM 9150SE

I see two screens on my desktop.


You are using a screen resolution that is not supported by your monitor. Start the computer in safe mode and open display properties. What ever resolution and color depth is (usually 640x480 and 16 colors), click OK button. \015\012Restart the comput ... ASTVision 5B 15 in.CRT Conventional Monitor

Problem with the increase the resolution of display from 800X600


Go to your desktop, find a blank space. Right click to open up a context menu. Near the bottom, there should be a "properties" tab. This will open up a display manager. Scroll through the tabs until you find one that has the resolution settings ( ... PC Desktops

Envision model H190L ser#91077CA000122 cannot change resolution


Mac's a bit differant than windows. To change your screen resolution first change the monitors refresh rate to something like 75 hertz. Than you can change the Screen resolution. Thats how it is done on a windows machine. Than again your Mac might ne ... Gateway FPD2275W LCD Monitor

Problem with my LG monitor L194WT


You will have to increase the referesh rate first and then go into the game and reset the resolution. The resolution bit is secondary. If increasing the refresh rate works, then you dont have to change the resolution :) ... Computer Monitors

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Screen resolution locked on 600X800 cannot increase


Thanks for getting back to me after 6 months it was REALLY helpful. I now have a new computer ... Apple Cinema Display 23" HD Monitor

Need to increase font size without effecting pixel clarity


The first step for optimal readability is to set your PC's graphic output to the native resolution of your monitor.The Samsung 2033SW is a little unusual in this regard since it provides a matrix of 1600 x 900 pixels, which is not very common. ... Samsung Syncmaster 2033SW Monitor

Increasing resolution higher than 800x600


The screen res is adjusted through windows not through the monitor.the pop up you speak of is only informing you the current screen res as set up through windows. ... ViewSonic VA721 17" LCD Monitor

Width increases a bit on lowering and incresing resolution


Hence my earlier suggestion of lowering the resolution, it was actually a test. Now we are getting somewhere. Yoke is definitely out, opposing diode pair is also out. The remote chance of the horizontal sync/oscillator is also out. That l ... Samsung SyncMaster 753S 17" CRT Monitor

The display is incorrect


Well from a quick google i can see the original manufacturer was Panasonic. As a general rule of thumb , if you cannot get higher than 16 colours and 800x600 resolution then thats probably all the graphics on the laptop can support. Looking at the sp ... Panasonic Toughbook CF-27 Notebook

My ISP is comcast.net, and I have been connecting to their home page directly, by clicking the icon for Internet Explorer on my desk top. Recently, the home page for another entity, "alot," appeared, and I cannot delete or remove it. I go to Tools Internet Options, General, delete "alot" from the box for ISP home page, and type in "comcast,net," but cannot activate it because the box for "apply," or "O.K." is below the bottom of my monitor screen, even when I raise the dialogue box as high as p


Hi,Have you tried increasing the Screen Resolution to 1024 X 768? This could be done by right clicking on any clear area of your desktop, click on "Properties", click on "Settings" tab, move the Screen resolution slider till it shows 1024 ... PC Desktops

I have an NEC S970 laptop and cannot boot it


May be this can help you if not contact me [email protected] f8 goto enable vga after login just set the resolution into 800x600 then restart the laptop in normal mode or els c ... PC Laptops

Windows multiplied My 9 year old son has caused me a problem. He admits to getting into control panel, windows config and who know what else. My opening windows 98 screen is now divided into 3. Left, center and right with equal blank spaces in between. 3 cursor arrows, 3 start buttons, 3 sets of equal sized icons etc. Any ideas would be greatly appreciated, other than keeping the boy away from the computer in the future. haha Thanks.


What your son did is change the video resolution on your video card.\015\012right click on a blank area of your desktop, this will bring up a popup menu, left click on the word "properties" in the menu. this will bring up your display settings window ... CTX Value VL 510 15" CRT Monitor

We have a canon MP610 printer scanner combo, I work in a dentist office and am trying to scan a x-ray. When I do it is'nt picking up the detail very well at all. I think I need to adjust the settings but I am not sure how. I was hoping to get some assistants or some direction. Thanks Kammy Arment


The only way to get a little more detail out of this printer with x-rays is to INCREASE the DPI resolution. there are no other adjustments that are abailable.\015\012The Scan Settings dialog box opens when you click Specify ... PC Desktops

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

I cannot change the screen resolution or the color quality


Make sure your drivers for the video card are installed or installed correctly. \015\012Goto your video cards website and download the latest version from there. The drivers installed by Windows are more a generic version, and extremely trimmed ... Computer Monitors

External monitor cannot stop moving


You need to right click on the desktop, select properties and then settings.  Change the resolution to be correct (or smaller) than that of your monitor.\015\012\015\012I suggest you start with 800x600 and then work your way up till it sta ... HP Pavilion F50 17" Flat Panel LCD Monitor

Need to change setting from 800x600 to 1440x900 on a hp w1907 monitor.


If your using vista right click on the desktop and click personalization--->click on display settings -----> there is a bar for resolution drag it over to 1400x900. IF your computer cannot display that particular size then your vide ... HP w1907 LCD Monitor

Acer 5610 boots for like 3 seconds only


When you power up the computer pressF8 key continues then if you got screen "safe mode and other thing" then there is screen resolution problem so then enter in enable vga mode then go to control panel ->disply-> settings increase scree ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2355 seconds