Having problems with your AOpen 19" LCD ?

Colors are off after auto adjust

\015 The menu and startup on the AOpen look fine color wise, but when the monitor receives signal it's ok for less than a second and then auto adjusts to a yellowish hue. Applying auto adjust fixes the colors for half a second then it reverts back to the yellowish hue. Closest fix is to bring red and green to 0 and blue to 100. Recall does not help.\015

Answers :

I seem to have found the solution (and the cause, perhaps?) for this problem!

I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've guessed), which was keeping it from powering up. After replacing the capacitors, the screen worked beautifully. But it had this weird yellow tint!

The strange part was that pure colors - red, green, blue - all appeared perfectly OK on screen. Curiously, the menus would show in the proper colors, except for one: the manual color adjustment menu, which illustrated "Blue" as a sort of off-green in the icon. Auto-Adjust would always fix the colors for a split second, then go back to yellow. Reset didn't fix it. Color reset didn't either. So, exactly the same problem as above.

The solution I found was hidden within the main menu itself, a sort of "easter egg". <b>Hold the Menu button down while pressing Power, and hold it down until the screen, and menu, appear</b>. There will now be a hidden selection, "Auto Color", printed in a red-on-black font at the bottom of the menu. Use the +/- buttons to access it, and press Menu. Voila! PERFECT COLOR! Perhaps this menu was accessed by accident, and calibrated to an incorrect color key. But now my picture works great, and the setting lasts through Auto-Adjusts and Resets!

Hope this helps some people, it sure saved my ****! ;)
The same problem the color, Using DVI suppose to solve this problem.
Repair Help & Product Troubleshooting for AOpen 19" LCD

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Colors are off after auto adjust


I seem to have found the solution (and the cause, perhaps?) for this problem!I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've g ... AOpen 19" LCD

Not true color


I seem to have found the solution (and the cause, perhaps?) for this problem!I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've g ... AOpen 19" LCD

We have a canon MP610 printer scanner combo, I work in a dentist office and am trying to scan a x-ray. When I do it is'nt picking up the detail very well at all. I think I need to adjust the settings but I am not sure how. I was hoping to get some assistants or some direction. Thanks Kammy Arment


The only way to get a little more detail out of this printer with x-rays is to INCREASE the DPI resolution. there are no other adjustments that are abailable.\015\012The Scan Settings dialog box opens when you click Specify ... PC Desktops

Can't manually adjust color


I happen to have an Acer Monitor although a later model. It has 4 buttons....one of these is the auto adjust and one other is the window that has manual controls (so to speak). If you look at it carefully...(and it should stay on the screen for at ... Acer AL1916W 19" LCD Monitor

Not able to adjust color auto or manually


... Microtech JTX V5 15" Flat Panel LCD Monitor

Colors in QL-711V shifted to green


Hi, I had the same problem and I wrote an email to Nu. They wrote me back that I should use the Factory reset feature which you have to go through the Factory Menu to get to. Instructions to do this are as follows. I got to the menu my first try b ... NuTech QL-711V 17" Flat Panel LCD Monitor

After first turning the computer on, the monitor screen image will sometimes display: off center vertically or horizontally, tinted off color, as lines, or not present at all. SOMETIMES pushing the monitor power on-off switch will produce the corect image. When this fails, disconnecting the power plug and reconnecting it once or sometimes several times will produce correct image so screen is fine and useable after the fussing with the tweaking proceedures described. I have tried changing the m


The screen should have a auto adjust feature. If you are using the Blue - VGA cable this may happen sometimes, it happens on my fully working asus monitors when I use a VGA cable instead of DVI.to adjust the screen or run a auto adjustmen ... Sony SDM-HS73P 17" LCD Monitor

Cant figure out color issue with computer.


Well...it's a Dell and even when it's well...it's still a Dell. Have you tried the monitor on different system to eliminate the tower being the problem? Some have updated and/or rolled back drivers to help cure this problem, which seems to be a ... Dell E176FP 17" LCD Monitor

I need to find the VGA controller for the Dell 2005FPW monitor


You can use on all vga cards(you dont need any special controler), this monitor has a USB hub\015\012and its is detected normaly on winxp or above, and the vga cards detect the monitor auto.\015\012i give you the monitor ... Dell UltraSharp 2005FPW 20.1" LCD Monitor

My aopen f2925 monitor has a green tint.


The solution: hidden menu within the main menu itself. Hold the Menu button down while pressing Power to power on, and release power button only when the screen comes up, still holding the menu button. The menu will appear and there will now be a hid ... AOpen F70PS 17" Flat Panel LCD Monitor

Color Problem Today I turned the pc on and the monitor is whole red! I didnt do anything i just turned it on and sudenlly everything is red. I tried the color adjustment or auto adjustment but it doesnt seem to work. can u help me with this?


In rare instances it is sometimes the 15 pin connector that connects on the computer end. Could be at the monitor end of the same cord, if it is a connector and not hard wired to the inside. Check both possible sides for bent pins.\015\012I onc ... X2Gen MG19MY 19" LCD Monitor

My web pages are to bright/ white.how do I fix this I would love to be able to see all the images. The background is white which blends with any light colors.


You can try to reset the monitor settings. Press the Menu button on the monitor and select and select Auto image adjust or reset option. This should bring back the colors or you can manually adjust the RGB (Red Green Blue) color bar from the menu. ... Acer AL1706AB LCD Monitor

Non-stop auto adjust in progress. I've tried


... Dell E153FP 15" LCD Monitor

Cmv monitor bad color


The problem is your monitor, not driver or settings or video adapter cards. You have basically two options get another CRT or LCD display, or if it is still under warranty call the company get a "Return Authorization Number" and ship it back to the m ... Computer Monitors

Hp lcd f1532 h


This can happen if the minus button which happens to also be the auto image-adjust button is effectively grounded due to some internal fault or\015\012if the switch itself has got jammed internally. In this case, if video signal is present, the ... HP Pavilion F1523 15" LCD Monitor

Auto-adjust not correctly fixing display


Was it always like this if it want go to the start botton on windows all programs accessories then system restore restore it to the date it was normal if that dosent work then re install the disk that came with the monitor if there was no disk try pl ... AOpen F70PS 17" Flat Panel LCD Monitor

RE: soyo topaz s. I need to adjust the brightness


... Soyo Computer Monitors

The color of the screen is not correctly appearing.


If your monitor has color controls try them,if your monitor has auto adjust try that too.if you can test the monitor on another computer try that as well to verify the monitor is causing the problem.if none of this works its safe to assume that the c ... Chi Mei Corporation 221D-NBC Monitor

My monitor's color is mixed with the color yellow


There is an option on the monitor to reset colour to factory default. Just bring up the on screen menu by pressing the left most button at the botton. Use the button next to this to highlight the colour settings which I think is the 5th or next to la ... Samsung SyncMaster 940N Flat panel Monitor

My HP vs. 17 tft display is viewing yellowish colors. When I do auto adjustment, the colors become normal until the progress is finished, then it reverts to the bad colors.


... 3G Technology GM-171B 17" Flat Panel LCD Monitor

My monitor has a green hue that will not go away when I adjust the colors in the screen. The blue adjuster doesn't seem to do anything. When I use auto adjust, It looks amazing for about 5 seconds then goes back to the green shade.


If you have another PC try it on the monitor, see if the problem persist. I f it doesn't check your video card's control panel. Some configuration there, may be overriding your monitor's. If you have an nvidia based card run the "optimize my display ... AOpen F2715-8S Monitor

Unable to have 1280x768 full screen with DVI cable


Use the menu button on the monitor itself to adjust for the screen size in DVI mode.\015\012\015\012 \015\012\015\012On your SVGA adapter, go to your display properties (right click on desktop) click ADVANCED and change the refr ... ViewSonic VG2030wm LCD Monitor

I am using the LG Flatron L1715S 17" LCD Monitor as an external monitor for my lap top as the screen on my lap top is toast. What I cant figure out is how to size the screen to fit the proper dimensions of the LG Flatron L1715S 17" LCD Monitor.


The FLATRON L1715S color LCD monitor with auto-synchronous support, plus it is PC and MAC compatible, has features like simple one button\015\012auto setup and is VESA DDC2B, DDC1, Plug and Play compatible.use the 'Auto' adjust button on ur lcd ... LG Flatron L1715S 17" LCD Monitor

Need help with new AGP video card for T3092 E-machines desktop


You should go in to your start-up bios and ensure the on-board video is disabled. The computer will auto-detect the video card but if the on-board video is enabled then it will cause a conflict. Let me know what happens. Good luck. ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1601 seconds