Having problems with your AcerPower F1 PC Desktop ?

LCD MoNITOR no Signal

\015 Hi, I just turned my monitor off to let it cool. When I turned it on the next morning it says "no signal". I waited a couple of days and see if it works, it is still saying "no signal". I tried plugging it in on my friend's CPU and it worked fine. What seems to be the problem? \015

Answers :

The problem lies with your video card. The fact that it worked on your friends computer proves that it is not your monitor. Some motherboards have two video adapters. One on a video card and one on the motherboard. You need to open your PC case and see if you have one or two. If you have two then you can try the other one. Otherwise, replacing the video card will correct it. However, if the only video adapter is the one connected to your motherboard then the motherboard has to be replaced. If you have any questions let me know.
\015\012Please vote on this solution before logging out.
Repair Help & Product Troubleshooting for AcerPower F1 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Signal degradation across vertical section of


This appears to be a common complaint on LCD monitors. Some LCD screens have control issues.An LCD screen is the panel and a bunch of Line control chips wrapped around the outer edge. A problem with one line top to bottom or left to right is al ... iiyama Computer Monitors

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

No signal - ViewSonic Computer Monitors


You don't specify what kind of monitor, CRT, LCD, or even a TV attached to your system, you're using. It's likely the monitor is set to receive a certain kind of signal (either analog or digital) but it's receiving the other one instead. Before proc ... ViewSonic Computer Monitors

Flickeing like a dying fluorescent light bulb


Actually this is a 'warning' signal from your lcd monitor. The problem is your lcd ccfl lamp are near to their life, need to change. The ccfl lamp like our home fluorescent lamp, when the lamp need to dead, the lamp will flickering first, after some ... Samsung SyncMaster 710N 17" LCD Monitor

Gateway Monitor keeps going black


Alicia, Your monitor digital board is OK. The problem is with the power supply/ Inverter board(s) in back of the LCD/LPD Panel that you look at. You will need to question Gateway to see if they have a swapout program where you send them $30-$60 and y ... Gateway FPD1760 Monitor

Problem for LG 22" FLATRON Widescreen LCD Monitor LCD Monitor My monitor says analog power save and shuts off. Day before Yesterday I bought a new computer. I got the above mention problem on by monitor mostly when I connect it to UPS. But after that when I connect the monitor to mains the problem still remains. I have to restart my computer. Also before I bought the UPS on main power supply it gives same problem. Asha Joshi


The monitor is going itself to the Power Saver mode.It is not a problem of the monitor.This happens when there is no signal on the monitor.The monitor will display properly when there is an output signal on it.Please connect it to the computer and ch ... LG 22" FLATRON LCD Monitor

Monitor starts then goes off, no signal


I would check the LCD against another monitor. It does not have to be a LCD, a regular monitor will do.\015\012This will tell you 2 things, 1. The Video card is good or bad, 2. The Cable is sendinf a good signal. \015\012If when you start ... HP w1907 LCD Monitor

Building a new PC, cannot get LCD to work


You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

Notebook with a cracked monitor


Not to sound argumentative, but it's not a useless paperweight yet. You can still connect an external monitor, and toggle over to it.(Connect a VGA monitor, to the VGA connector on the back of the laptop, turn the VGA monitor on. Hold the ... PC Laptops

I have a desktop pc HP Pavillion a6600f. When i power on the computer i get a blank screen. The monitor says no signal going to sleep. So far I have changed the graphics card, Switched the ram to different slots, and removed the cmos cell. I am open to any more suggestions you have for me. monitor is good i have it hooked up to another computer in front of me please help! operating system windows vista home premium 64. installed update then shut down computer when tried to restart nothing


Perry7575\015\012\015\012Most likely the problem is with Windows its self. I am not sure what is exacting happening but I have been seeing alot of this lately. Something is causing something with the video to get out of wack. I have fi ... HP Pavilion a6600f Desktop PC

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Acer monitor lcd problem


... Acer Professional P211 21" CRT Monitor

Gateway flat LCD dead - PC Desktops


I'm not sure if your referring to the lcd monitor (gateway brand) or a laptop's lcd screen not working anymore.\015\012\015\0121. if it's an lcd monitor...\015\012a. test monitor in a different pc before assuming the problem is the ... PC Desktops

LCD monitor (viewsonic va720) "No signal"


Some Laptops or PCs will only work with a 2nd Screen or monitor option on LCD, :Projectors or TV screens.On Display/.settings/ on PC you can select 2nd monitor option and apply.U should see your LCD screen flicker and displays ... ViewSonic VA720 17" LCD Flat Panel Monitor

Iiyama LCD 19'' no signal, no nothing, but power ok. ??


... Computer Monitors

Dear Sir, I have an iiyama Prolite 22" TFT LCD Monitor. As you know there are 2 connection cables. Whilst I can connect direct to the CPU with one of these, The one with the 'two groups of 9 pins and a tab on it (which I believe is: DVI D20 !), I am not familier with. Is there a special requirement whereby this one is usable please? I would appreciate any advice you could give in regard to this. Thank you. Yours truly, David Jones


Hi there,This device will convert a DVI-A connection to a VGA monitor cable\015\012connection for monitors and computers that require it. DVI-D can not\015\012convert to VGA. Only DVI-A can be converted into VGA.Use with ... PC Desktops

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Monitor: Offset display


This is caused by sending a video signal to the screen at a refresh rate higher than 60hz. A LCD Doesn't refresh the image by scanning from top to bottom like a traditional CRT or picture tube. They are hard set to 60hz and can not understand anythin ... Computer Monitors

NEC LCD1712 monitor works with laptop but not either one of my 2 desktops


... NEC LCD1712 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3316 seconds