Having problems with your Acer X203H bd Monitor ?

The monitor says there is no signal - Acer X203H bd Monitor

Answers :

There are possibility of cable broken in the path so bend the signal cable left and right and see whether display appears or not. tight the vga connector also try monitor on another cpu if display appear then monitor is ok if not then there is a dry solder inside the monitor
Repair Help & Product Troubleshooting for Acer X203H bd Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can connect my new acer X203H LCD monitor to computer

Open your cpu cabinet.Refix RAM memory .Pull cmos cell from motherbord for 10 minutes.Pull processor fan and processor then refix both clean dust from all parts.Remove pci cards from pci slot then check.Let me know if yo ... Acer X203H bd Monitor

The monitor says there is no signal - Acer X203H bd Monitor

There are possibility of cable broken in the path so bend the signal cable left and right and see whether display appears or not. tight the vga connector also try monitor on another cpu if display appear then monitor is ok if not then there is a dry ... Acer X203H bd Monitor

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Acer monitor lcd problem

... Acer Professional P211 21" CRT Monitor

Monitor comes up shows "acer" then says no signal and goes black

This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit

This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

Acer x203h only yields 720x480 resolution with Panasonic DVD player via HDMI output. Pana will not allow setting to output higher than 480p attached to this monitor. With computer, can adjust to full res of 1600x900. Monitor says 'signal out of range' on cable box.

The fact that other devices can go higher than the resolution provided by the panasonic dvd player is a strong indication that this is not a screen issue but one with your dvd player and you should consult the manual or web site for your particular m ... Acer X203H bd Monitor

Monitor comes up shows "acer" then says no signal and goes black

1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

No Signal I just plugged the ACER AL1912 to replace a working Dell monitor. The monitor powers up and I get the ACER logo to pop up, but moments later I get a box to pop up saying no signal then the monitor shuts down

Not all monitors can display the same resolutions. You may have has the Dell monitor set at something the Acer can not handle. Try rebooting and if you can see the Dell startup screen press F8 as soon as it disappears. This will give you the Windows ... Acer AL1912 19" LCD Monitor

Acer LCD Monitor - Stuck Displaying green

Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

X191w blank screen after 2 seconds

Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.

This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore

You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

The screen is broken and i need to connect it to a pc monitor in order to get data off but the monitor is saying no signal.... it showed the windows startup but then turns off

Most likely, that's because the video resolution or frequency is not set correctly for the "new" monitor. i am assuming that you are NOT ref'ing to a laptop computer being the one you need data from...your best bet will be to begin tappin ... Acer PC Desktops

No signal from monitor

When u power up the computer pressF8 key then enter in enable vga mode.\015\012then if u r able to enter in there then change screen resolution.\015\012And if u r not able to enter then check cabel from computer to monitor .\015\012 ... Acer AL1916W 19" LCD Monitor

I have just set up new desktop Acer. Error message: No input signal.

Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop


Looks to me, from your description, that the cable contact with the video port is bad. I would make sure things are firmed up at tat end, Sometimes, the video card itself gets unseated some, and needs a gentle push down that seats it back with renewe ... Acer AL2216WBD LCD Monitor

Monitor saying no signal

You need to return to where you bought this because it is still under warranty, you can not open this because the warranty will be cancelled once the stickers will be damaged ... PC Desktops

Problems connecting my acer laptop with tv

Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

Problem w/new Acer X203h 20" LCD Monitor

... Acer AL1916W 19" LCD Monitor

Acer al1713 monitor and the power led flashes form yellw to green

The short answer, replace all of the capacitors. They can be bad without swelling. And there may be one 47mf/16v off to itself, if it fails, monitor will not come on. Also, check the menu or mode setting to make sure your VGA/DVI agrees with the cabl ... Acer AL1713 17" LCD Monitor

I have an Acer X1700 desktop - 3 days old by the way. Runs Vista Home Premium. 1 day after arrival, pushed power button. Monitor light is blue, flashes the Acer logo, then says "no signal" and blue light turns yellow. The fan in the tower which operates very quietly, normally, is very loud at that point. Have been able to power down the tower and the monitor, unplug all from the wall, hold the power button on the monitor down for 20 seconds or so, turn it all back on, and then it boots just fine

I would get ahold of acer. It should be under warrenty. sounds like a hard drive issue to Me. Just because it is new doesn't mean it was right from the start. My neighbour had the same problem with his acer. I told him to but a dell or hp. good luck. ... PC Desktops

Monitor switches to standby when I attempt a connection

When you power up the computer check NUMLOCK Led on key bord if it is on and off when you pressnum lock then your cpu gives dispaly to monitor correctly.But if not then refix RAM memory in cpu.then when you power up the computer press F8 ... Acer AL1932D 19 in. Flat Panel LCD Monitor

Screen monitor images on the righ side is not showig.

Hi afcarrillo,This could be a simple resolution problem. By that I mean that the resolution is set too low, therefore putting things off screen. Here's how you change the resolution:Windows XP Right click the Deskt ... Acer Computer Monitors

Monitor not working

On the laptop, you'll need to change the video mode so that the laptop knows to send the signal out the VGA port. The two common ways of doing this are to find the Function key and the monitor toggle button. It's usually one of the F-Keys at the to ... Acer PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6480 seconds