Having problems with your Acer X193W LCD Monitor ?

The resolution comes and goes...

\015 I have the acer X193W and my laptop sundenly loose the resolution... This monitor is perfect for 1400x900 and some times this is available on the resolution list and some times is not... is really weird.. (well not that weird coming from windows, actually...) how can I solve that??? :S\015

Answers :

For that when you power up the computer press F8 key then enter in safe mode.
Then uninstall graphic driver then start it in normal mode then install graphic driver again then it wroks fine.
Let me know if you need more assistance.
Repair Help & Product Troubleshooting for Acer X193W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can't set up network w linksys modem

Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Screen goes blank when I move the mouse

Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Monitor comes on for seconds and then goes black

This may be because the resolution that is set in your user profile when you log on has been changed to a resolution not supported by the monitor. The best way to fix this is by going into Safe Mode (press F8 as the computer starts to load Windows) a ... Dell E152FP 15" Flat Panel LCD Monitor

The screen goes blank after 5 seconds

Make sure you have the correct drivers install for you video card. Also, check to make sure your resolution is not set to high for you video card. To get to resolution; right click on Desktop > click Properties > press Settings Tab, from ther ... ViewSonic VG900b 19" LCD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.

This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

I have a virus on my computer Toshiba Satellite

You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

Wont work with new computer

Since this was a new out of the box computer, Safe Mode was not allowed. In order to change monitor settings (resolution), I had to use another monitor, in this case a newer CRT. With the CRT, the computer booted up, no problem. Once booted, I turned ... Princeton Digital VL173 Monitor

LCD monitor wont work "input not supported " comes up

Assuming you are running Windows 95, 98, 2000, ME, or XP...\015\012\015\012During boot, after "all the computer details come up", press F8 repeatedly until a menu appears. One of the options will be "Enable VGA Mode". Choose that option. ... Computer Monitors

Cant get monitor on.button on monitor turns green then to yellow when connecting cord. made sure connection was firm. monitor worked on other computer and computer worked with other monitor with the same cord

Connect the computer to another monitor, and lower your screen resolution. It is very likely that your computer is sending out too high a resolution signal, and while your other monitor is OK with that, the monitor in question isn't, and goes into pr ... Dell Computer Monitors

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.

Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step ... CTX S762A 17" LCD Monitor

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank

The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

My monitor goes to sleep and doesn't come back on.

For that when you power up the computer press F8 key then enter in enable vga mode .\015\012Then go to display property and set screen resolution to 1024*768 then apply and ok.\015\012if still not work then try safe mode then uninstall gr ... HP w1907 LCD Monitor

Wavy lines, goes black during video games.

It sounds to me like the monitor's refresh rate is too low to support your current settings, and the demands of the game. Have you tried adjusting the refresh rate? If I'm right, you should be able to fix the wavy lines that way. I'm not sure how ... Proview PL926WBi 19" LCD Monitor

Computer screen goes into "digital power saving mode"

You should be able to adjust the settings on the monitor to prevent it from going into power save mode, or at least to delay how long it takes before it goes into power save mode. Press the menu button and look for settings that might disable or chan ... LG L1915S 19" LCD Monitor

Dell xps m 1330 starts fine but goes ...

Boot into Safe Mode and change the video resolution to the lowest resolution supported. Reboot the machine normally. The problem should have disappeared. From here you can readjust your display resolution to any higher resolution supported by the ... Dell XPS M1330 Notebook

Monitor goes black

Sorry to have to tell you this, but this is common in LCD monitors. The reason that it is going black when it boots is for one of two reasons. You either have a bad power supply that powers your LCD or your LCD's backlight is blown. These can be re ... Acer AL1711 17" Flat Panel LCD Monitor

Blank Laptop Screen

The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook


The resolution setting may have been in inadvertently change to one that your monitor does not support you mentioned that you have another monitor that does work with your computer what i would do is to set the video resolution to the lowest possible ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Data Shows up only on External Monitor, not on Laptop Screen

If your system won't display anything w/o the external monitor. there's something wrong with the LCD's backlight. you may have to contact your laptop's manufacturer and check if this laptop is still under warranty. you may have to get the lcd replace ... Toshiba Satellite A135-S4527 Notebook

Monitor will not stay on. It comes on when

Someone set the refresh rate or the resolution to high for the monitor to display - start up in sage mode and change the resolution to 1024 X 768 this should work ... Acer AL1715 17" LCD Monitor

The resolution comes and goes...

For that when you power up the computer press F8 key then enter in safe mode.Then uninstall graphic driver then start it in normal mode then install graphic driver again then it wroks fine.Let me know if you need more assistance.Tha ... Acer X193W LCD Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

My HP monitor (f50) has malfunctioned

Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Cannot get monitor out of sleep mode

About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

Acer laptop LCD goes black for few seconds

I don't believe there is an actual fix for this. One thing you can do is lower your resolution settings and see if it helps.please don't forget to rate me. ... Acer Aspire 5610 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3816 seconds