Having problems with your Acer X193W LCD Monitor ?

New video card wont work, acer monitor no signal

\015 Alright, I just swapped my old video card for an ATI Radeon 4650. From the start it would only say "input not supported" on booting. (This is after I put the card in). So I used BIOS to changed the video card to IGFX (did this do something?) and now it says nothing but "no signal" when I re-boot my computer. I don't even see the BIOS. What am I to do?\015

Answers :

Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.
after you have used the bios to switch back to the AGP you can start widows in safe mode to access the video card display options you need to reduce the resolution to a lower setting compatable with your monitor it can't resolve as high as this new video card can go.
Repair Help & Product Troubleshooting for Acer X193W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New video card wont work, acer monitor no signal


Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.after you have used the bios to switch back to the AGP you can start widows in safe mode to acc ... Acer X193W LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

DVI cable not working


If you still have your old monitor plug it back in for a bit and load the drivers for the new monitor (from the disk which came with the new monitor). Right click on your desktop and choose properties and set your display resolution to something lik ... PC Desktops

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

Have everything running on computer no signal on moniter or beeps


Well if it wont display anything that means the chipset has been damaged somehow my hp pavilion did the same thing and i had to buy a new graphics card try opening up the computer and have a look if you see heat sinks in a square without a fan that w ... Acer Aspire T180 PC Desktop

Old monitor wont switch on - Computer Monitors


Hi friend,\015\012First, try connecting your monitor to a known good PC, possibly the old laptop you are using now. If the monitor works, the problem is with the video card in your PC. If the monitor does not come on, it is the monitor. It is u ... Computer Monitors

Acer al1922 monitor no signal:


If it does the same with other PC then you need to open it up and first thing to look for are bad caps in the power supply, see example of failed monitors due to bad caps, transistors, transformers, lamps: ... Acer AL1916W 19" LCD Monitor

Acer Aspire 5100


This machine has the video card integrated into the main board, so the lose card idea is out the window. However you can check to see if the connection to the display is good by removing the button panel near the display. To remove the button panel: ... Acer Aspire 5100 Notebook

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors

No Video Signal


Try resetting the bios. On the motherboard there is a battery that looks like a watch battery. Remove the battery, then replace it again. (make sure the computer is unplugged from the wall socket when you do this)\015\012\015\012Does th ... Gateway GT4015E AMD Athlon 64 3500+ 2.2GHz / 1GB DDR / 200GB HDD / DVDRW DL / DVD-Rom / Flash PC Desktop

LG StudioWorks 700s Monitor NO SIGNAL


First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

Acer 22 in monitor


From what you say, I'll assume you see stuff on the monitor like the BIOS info,and the Windows splash screen. Then it goes black.This happens when Windows loads the video drivers for your video card. Up until that point, you are using generic ... Acer Computer Monitors

My acer m3100 does not connectto my monitor - Acer Aspire M3100 Refurbished Desktop PC - AMD Athlon X2 5600+ 2.8GHz, 3GB DDR2, 500 SATA, DVDRW, Fl


What it says on the monitor ? No signal ? If yes then:\0121 - check the cable, eventually use another one and plug it in in the other video socket.2 - check if the problem is a software one by trying to boot in Safe Mode - if you can then ... Acer Aspire M3100 Refurbished Desktop PC - AMD Athlon X2 5600+ 2.8GHz, 3GB DDR2, 500 SATA, DVDRW, Fl

LCD monitor signs "no signal" on eMachines t3418


E-machines had had a long history of bad power supplies. I've seen many of these machines go bad and when they do they take out the video chip (Nvidea) with it, usually shutting down the whole machine. I've never seen one operable. You might be ab ... E-Machines eMachines Monitor E15T4

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little


I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run opt ... PC Desktops

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Monitor goes black


Sorry to have to tell you this, but this is common in LCD monitors. The reason that it is going black when it boots is for one of two reasons. You either have a bad power supply that powers your LCD or your LCD's backlight is blown. These can be re ... Acer AL1711 17" Flat Panel LCD Monitor

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Installed new video card but the signal remains black


REMOVE THE CARD AND UNINSTALL THE VIDEO CARD IN ADD REMOVE PROGRAMS. THEN REMOVE VIDEO CARD AND INSTALL DRIVERS THEN INSTALL YOUR VIDEO CARD. I HAVE THIS SAME VIDEO CARD AND HAD THE SAME PROBLEM.THIS WAS THE ONLY WAY I COULD GET IT TO WORK. ALSO YOU ... HP Pavilion A6010N (882780985575) PC Desktop

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Wont go to normal start up screen!!!


The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Acer AM5641-U5520A will not


If you removed the memory modules and there is no change then I would start disconnecting one device at a time to see if that is causing the problem. Start by disconnecting the cd/dvd rom and then try booting the computer. Then try disconnecting any ... Acer AM5641-B5560A Desktop PC & Monitor BUNDLE

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

What driver do i need for my acer desktop monitor


It will most likely not be the monitor at fault, but the video card in your computer.\015\012\015\012If your monitor is working like a monitor should, then it is a bit of technically dumb equipment. It can only do what the video card tell ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.5269 seconds