Having problems with your Acer PC Desktops ?

When in gmx,letters are too large .How do I set the display back to normal.

Answers :

Right click on the screen then select properties..while on display properties click settings..under the screen resolution, adjust the slider bar to the right until the pixel is 1024x768..adjusting to the right decreases the pixel and to the left increases the pixel.. under the color quality select highest (32 bit)..click apply then OK..when prompted to keep the settings click OK..
Repair Help & Product Troubleshooting for Acer PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03

Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

Hannspree 19" HF199H LCD - Display is LARGE on monitor!

Try Control Panel - Appearance or Display- You can change how your 2nd display looks there.. Sounds like you have it set in Clone mode...(both displays show the same things)...See if you can reset the 2nd display resolution while keeping the laptop i ... Hannspree 19" Widescreen LCD Flat Panel Monitor

Display reverts to Extra large icons and font

Well..hmmm..sounds like your display settings are a bit odd..if you want, we can do an E Housecall. send me a note through my profile information ... Acer Aspire 5610-4648 Notebook

Moniter activation when turning on the cpu

First, I would make sure that the latest drivers for the video card are installed. If the video card is from a major manufacturer, then Windows Update might even provide them.\015\012\015\012Next, try booting the CPU into Safe Mode (hitting F8 when ... E-Machines W4885 PC Desktop

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.

Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

Desktop too large for monitor

This has to do with the resolution settings on your display, or someone has changed the default dpi, or the bios has been adjusted.\015\012What OS are you using? xp? vista?\015\012What make & model # of computer?\015\012Right cl ... ADI Corporation MicroScan A708 17 in. Flat Panel LCD Monitor

When I switch my windows XP Home Edition on instead of the usual gradual build up to Desk Top & icon programmes etc. I get the usual large black screen but instead of the windows motif appearing I get a deep blue oblong about 6"x1" with a message ("OUT OF RANGE") (H:27.8K V: 61.9) The H27. 8K Flashing Red This happens every time when switching on and the only means of closing down is to turn the power off. I have a Lap Top connectd to the Desk Top

The results you are seeing are actually from the monitor itself. It's telling you the vertical and horizontal sync frequencies to help you troubleshoot your lack of display.\015\012\015\012You'd usually see this happen when someone has se ... Packard Bell PC Desktops

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer

Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

The screen seems to be too wide, the task bar is off the screen and so are all the icons. I think I did something when I was messing with the resolution and I cannot get it back to normal. All of the windows open up but are off to the right where I cannot see them.

Yes you did something - you set the resolution so low that everything is too large to fit on the screen. If you are unable to bring up and view the setting to change it back the simplest thing may be to boot into safe mode. Although changing the se ... PC Desktops

Windows vista lare icons and text

In changing the icons to normal, did you reset the screen resolution? If not, set the resolution lower, apply, then reset it back to the original (usually 1024x768), then apply. ... Toshiba Satellite P105-S6207 Laptop

CPU Fan Speed Too Low or Fails***

There are three things you need to have a good gaming computer, fast graphics card, fast CPU, and lots of RAM. You didn't list your RAM so I can't help you, but 4GB is the most you can put in a computer. If you want to know everything about your comp ... ViewSonic VX910 19" LCD Monitor

I was pushing buttons on my monitor trying to get the screen to come back on, and now my font is very small and hard to see. How do I get it back to normal? I already went to view and clicked off large under text size. Even everything on my desktop is small and to type it is very tiny also. Help please!

Your resolution is probably set to high.If you have Windows XP: Right click on the Desktop and select properties. Click the Settings tab, and move the slider towards the left to get a larger resolution. You may have to experiment, but a standar ... HP Pavilion F1503 15" LCD Flat Panel Monitor

I recently did a system restore on my laptop and when I got the PC back up and running, all of my icons were really large. I got all of them back down to normal size but the Log In icon is still really big. How do I get that back to normal?

You will need to change the screen resolution. Right click on the desktop main screen and then click "properties" and then click "settings" Under screen resolution, move the slide bar to 1024 x 768 (you can further increase it as per you ... Toshiba Satellite P205D-S7802 Notebook

I do not my computers oprated - PC Desktops

Hi,\015\012 You have easily operate your computer. The steps given below....\015\012\015\012Materials Needed: \015\012- CPU- keyboard- monitor- mouse- speakers- printer- Operating S ... PC Desktops

Intermittent monitor outages with MPC Transport T1200? Should I replace monitor or check wiring and how? New-to-me laptop, upon powering on no picture was visible, could hear all normal sounds of windows booting up. on closer inspection the picture WAS visible, but too dim to make out more than the gray of dialog boxes, the white background of my computer, etc. wiggling the monitor will temporarily fix the problem if held at precisely the right angle. I don't see any screws near the hinge tha

Looking through your owners manual, there are several keyboard shortcuts that can at least increase the appearance, although it sounds like a simple connection problem. Very hard to find a repair manual, although most transport laptops have a very th ... MPC Computers TransPort T1200 Notebook

Computer has frozen on windows logo

1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem

First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

Compaq presario laptop display problem

Use system restore to bring back the computer to a date before the one you started to have troubles with the screen. After this you may need to reinstall display drivers, as you installed an older version after getting in troubles.\015\012 ... PC Laptops

I have a toshiba a135 s7403. It shut down while just surfing the net. Since, it won't start up. Can hear the fan running and dvd drive turn on, but nothing happens on the screen. Had the motherboard replaced a couple months ago before the warranty expired. Tired removing battery and unplugging it for days. No luck. Any ideas?

If the memory is not\015\012evenly seated after inserting it according to the instructions, there\015\012are 2 ways to correct this. The first is to use a tool to set along the\015\012edge of the memory module on the outside edge of where it is not f ... PC Laptops

Soft ware for window 98.ihave windows visa - PC Desktops

When an application fails to run, start the Program Compatibility Wizard by clicking on Start \\ Control Panel and select 'Use an older program with this version of Windows' listed at the bottom of the side bar. ... PC Desktops

Everything is large cant see whole page - PC Laptops

Go to control panel,display, settings, advanced and make sure the DPI is set to normal, and the resolution on the settings section is set to one supported by your monitor.\015\012If this size is only in browser windows, go to View and adjust th ... PC Laptops

Kogi L9ch 19 in flat monitor

(I posted the latest post.) Change the resolution. (Mine was 1024 by 768, so I changed it first to 800 by 600 and then back to 1024 by 768, and it's back to normal!)\015\012\015\012Hope that helps. ... Kogi L9CH 19" Flat Panel LCD Monitor

The monitor turns off and on repeatedly.

There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.

This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook

Gx270Screen splits up

Check your video card settings, it sounds as though the setting is set for two displays.\015\012Good Luck. ... Dell OptiPlex GX270 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8167 seconds