Having problems with your Acer PC Desktops ?

My monitor says that there is no signal - Acer PC Desktops


Answers :

First check the connection to the PC. If the connection is good between the monitor and PC, you will need to check the video adapter and reseat it if necessary. Typically reseating the adapter fixes the issue 95% of the time. Be sure to make sure you don't have a KVM switch connected. I have ran across that before.
Repair Help & Product Troubleshooting for Acer PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit


This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

Problems connecting my acer laptop with tv


Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

ACER MONITOR SAYS 'NO SIGNAL'


Looks to me, from your description, that the cable contact with the video port is bad. I would make sure things are firmed up at tat end, Sometimes, the video card itself gets unseated some, and needs a gentle push down that seats it back with renewe ... Acer AL2216WBD LCD Monitor

I have an Acer X1700 desktop - 3 days old by the way. Runs Vista Home Premium. 1 day after arrival, pushed power button. Monitor light is blue, flashes the Acer logo, then says "no signal" and blue light turns yellow. The fan in the tower which operates very quietly, normally, is very loud at that point. Have been able to power down the tower and the monitor, unplug all from the wall, hold the power button on the monitor down for 20 seconds or so, turn it all back on, and then it boots just fine


I would get ahold of acer. It should be under warrenty. sounds like a hard drive issue to Me. Just because it is new doesn't mean it was right from the start. My neighbour had the same problem with his acer. I told him to but a dell or hp. good luck. ... PC Desktops

NO Signal, check cable


Hi there,you can enable a second monitor when it is plugged into the rear vga-jack while windows boots up and auto-detects it.-by right-clicking on the desktop background, goto: properties - display -settings- advanced ... Computer Monitors

I have an Acer X1700 desktop - 3 days old by the way. Runs Vista Home Premium. 1 day after arrival, pushed power button. Monitor light is blue, flashes the Acer logo, then says "no signal" and blue light turns yellow. The fan in the tower which operates very quietly, normally, is very loud at that point. Have been able to power down the tower and the monitor, unplug all from the wall, hold the power button on the monitor down for 20 seconds or so, turn it all back on, and then it boots just f


Hmm... maybe... take it back? ... Acer Aspire™ T180 PC Desktop

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

My acer m3100 does not connectto my monitor - Acer Aspire M3100 Refurbished Desktop PC - AMD Athlon X2 5600+ 2.8GHz, 3GB DDR2, 500 SATA, DVDRW, Fl


What it says on the monitor ? No signal ? If yes then:\0121 - check the cable, eventually use another one and plug it in in the other video socket.2 - check if the problem is a software one by trying to boot in Safe Mode - if you can then ... Acer Aspire M3100 Refurbished Desktop PC - AMD Athlon X2 5600+ 2.8GHz, 3GB DDR2, 500 SATA, DVDRW, Fl

Acer AL1912 Monitor - Screen to black and light on yellow


I found some solutions other posted that didn't come up the first time I looked. I did a reboot and I'm good to go! ... Acer Computer Monitors

Can't connect my emachine to 50" samsung plasmatv mod#pn50B530S2F


Try going to "display properties" and adjusting the settings there. Right click on the desktop wallpaper and go to properties, then click on the settings tab. Make sure the TV setting is turned on ... Acer Aspire L100 PC Desktop

Acer 22 in monitor


From what you say, I'll assume you see stuff on the monitor like the BIOS info,and the Windows splash screen. Then it goes black.This happens when Windows loads the video drivers for your video card. Up until that point, you are using generic ... Acer Computer Monitors

Thank you so much, but Im not really getting the computer to boot up so i could get into the settings on my Acer Aspire ASE60-U-A3503 PC Desktop computer. Like I said, The VGA connector when connected to the CPU is telling me no signal. There doesn't seem to be a connection, I;m not seeing anything on the monitor other than when the two are connected no signal and when I disconnect, its saying that a cable is not connected. Black/blank screen no beep or nothing when i turn on computer. What is m


If you have more that one connection for the monitor try one of the others.\015\012\015\012This happens frequently when people add video cards and forget to disdable the onboard one or maybe swap to the onbaord one and forget to turn off ... Acer Aspire E360 PC Desktop

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

We have just taken delivery of a refurbished ACER ASX1700 DESKTOP PC when we install it the monitor is saying ''no signal'' all wires appear to be in the right slots - after 30 seconds the monitor goes intostandby (ie orange light) rather han the blue light now when we plug our old pc into the monitor using the new (and old cables!) the monitor works fine - are we missing anything obvious or is the pc damaged???


Check the BIOS to make sure the video card is selected for boot up, other than that you may need a video card ... Acer PC Desktops

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Pc turns on but screen says no signal - Acer Aspire M1100-U1402A Refurbished AMD Desktop PC - AMD Athlon X2 4400+ , 2GB DDR2, 320 SATA II, D


There may be problem in Monitor or VGA Card.\015\012When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card.\015\012\015\012\01 ... Acer Aspire M1100-U1402A Refurbished AMD Desktop PC - AMD Athlon X2 4400+ , 2GB DDR2, 320 SATA II, D

Acer monitor lcd problem


... Acer Professional P211 21" CRT Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Acer Aspire 5003WLMi


The reason for not seeing any picture on the external is becouse it is disabled in windows. I have 3 lcd screens here, only one gives picture untill I go and extend my desktop into the other monitors.from desktop -> right click anywhere -> ... Acer Aspire 5003WLMi Notebook

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8843 seconds