Having problems with your Acer Aspire T690 (AST690UP820A) PC Desktop ?

When i unplugged the computer and moved it within the same room and tried to hook it back up it started to come on then there was a beeping noise that would not go away and the monitor says no signal and yes the monitor is plugged in and all cables are connected properly any ideas

Answers :

The beeping sound means that a pci card or a stick of ram has come loose. What you need to di is open up the side of your pc tower and firmly press down on the pci cards and ram to make sure there secured and then put side back on pc and start pc back up to see if noise has gone. Hope this helps and thanks for using Fixya.
I would like to qualify the beeping as a signal of WHAT is wrong, and the type of beeps - such as 3 then a pause, indicate specific things that you should be able to find documentation on.

Among the codes I recall are things like "interrupt chip" problems (new motherboard) "no low memory available" (reseat the DIMMs); etc.
Repair Help & Product Troubleshooting for Acer Aspire T690 (AST690UP820A) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I've been trying to use s-video cable to connect

\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Hi,could some one walk me through setting up my Billion modem wirelessly to my Dell Desk top running XP home. I get confused with firewalls,LAN settings etc Ethernet cable is being used at the moment. Do you need drivers etc

I am not familliar with that brand, so I do not know if it is a cable/dsl modem, a router, or a combination of the 2. I will assume it is the cable or dsl modem since you said modem.The thing we need to do first is give you a basic unders ... Dell PC Desktops

Laptop to tv

\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

When i unplugged the computer and moved it within the same room and tried to hook it back up it started to come on then there was a beeping noise that would not go away and the monitor says no signal and yes the monitor is plugged in and all cables are connected properly any ideas

The beeping sound means that a pci card or a stick of ram has come loose. What you need to di is open up the side of your pc tower and firmly press down on the pci cards and ram to make sure there secured and then put side back on pc and start pc bac ... Acer Aspire T690 (AST690UP820A) PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Sony Monitor says "No Input Signal, switch to Power Save"

Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

Mitsubishi diamond pro says "no signal"?

You have tried the monitor on more than one known good computer, yes?\015\012\015\012I believe about 4" inside this monitor in the back the vga cable or connector connects to a board with an in-line connector. Can you see if this connect ... Mitsubishi Diamond Plus 100E Monitor

Going to Sleep

Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Emachine T6410 turns on but the screen says ''No Signal''

When you get the no signal ..this is just the cable that plug into the monitor...either on the video card ..or on the monitor side...but it is sure the cable ...whenever that signal is on ...this means that it do not detects any video signal came fro ... PC Desktops

PC is not working. Monitor message says 'monitor

Check to make sure that you have it plug all the way in to the video card. Also make sure that the video card itself is seated or pushed in good.You could possibly need a new video card or the pins on the plug coming from the monitor cou ... PC Desktops

No color red displays.

If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Montiors shut off

If the monitor goes into standbye when you plug it into the computer , it generally means there is NO signal coming from your video adaptor.\015\012Plug the old monitor in , if it works, ide suspect the new monitor(s) are not working correctly. ... Systemax Venture PC Desktop

Computer boots up when plugged in,monitor powers down

Hi there.......\015\012\015\012it is the memory it has to be matched with the actual fsb of the cpu if its slower then it wont switch on.....\015\012\015\012and some dell pc's wont work with 1gb sticks so accertain which ram i ... Dell OptiPlex GX260 PC Desktop


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

Graphics card stopped working in pci-express slot, monitor says "no input signal", plugged monitor into onboard graphics vga and runs ok. brought new card and fitted in pci-express slot but monitor still says "no input signal" pc is hp pavilion slimline s3040.uk, onboard graphics chipset isnvidia GeForce 6150le, new card is nvidia GeForce 8400gs. I have replaced dvi/vga adaptor and checked pci-e is selected in startup. any ideas?

... PC Desktops

Nvidia Vetro Geforce 6800GT on E510? Need help setting up max displays MD 219 dual displays

... Max Displays MD-219 (Gray) 19 in. Flat Panel LCD Monitor

Power outage,monitor wont power up,hope its not fried

I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor

No Signal when desktop wants to load

This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

I cannot restart my PC AllI get is a note saying NO SIGNAL ANALOG

I had a problem like that ,my tower got bumped and fell over. the heatsink and processor fell off. i had to remove processor (p4) from heatsink and make sure all the pins were straight and aligned properly. i cleaned both parts with alcohol. i then ... Gateway GT5058 Desktop PC

NEC FE2111sb multisync 21 inch monitor troubleshooting

The symptoms you describe sound like the monitor is going into 'greeen mode' - that is to say, it sees no video signal present. first, try another monitor ti isolate and make sure the problem is the monitor. check the vga plug pins [especially if you ... NEC MultiSync FE2111SB 22" CRT Monitor

Flat screen wont turn on

Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Dell E173FP 17" LCD Monitor

Old monitor not recognized by new computer, stuck in power save.

... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

My monito is not getting signal - Gateway FPD1760 Monitor

If your monitor says no signal and goes to sleep when your pc is on then the first thing to check is if it's plugged into the correct socket. I've had people tell me yes to this question and when I see them all I do is plug the monitor into the right ... Gateway FPD1760 Monitor

ProView monitor CY-465 Model 468

Jomilshe,\015\012Your monitor not detecting your PC. Check your cable for any damaged pins or changed another cable. Still the same problems...Used another monitor on the same PC. If it OK! Then the other monitor AD board need to be replaced ... Relisys RLT1720 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7620 seconds