Having problems with your Acer Aspire™ T180 PC Desktop ?

Cannot get my graphics card to work.

\015 I have an acer aspire t180//ast180-ud400b// amd 64 atholon x2 // my on board card is a gforce 6100 n force 405// the new graphics card i purchased is a Geforce 8400 gs PCI express. I have went through the whole disabling onboard card then Powering off the machine, putting in New card , and hooking up my monitor to new card. Unfourtanetly the MOnitor is not responding to new card and when i check in Device Manager after plugging in my monitor to OLd card I only see my Onboard card... iHAve aslo tried RIght Clicking n Scanning for new hardware but NOthing, for some reason the the PC is not Seeing that New card. Ihave also checked 4 times to See if it Card is Seated Correctly it seemed to be. ALso whats Wierd is the Small fan On new graphic card is Spinning while plugged into PC, so theres has to be a CConnection there. Acer wants my Soul and my first born for 30 minutes of tech suport \015

\015 \015 \015 \015 \015 \015 \015 \015 Posted by\015 \015 \015 pito_lv\015 \015 on\015 Feb 11, 2009\015 \015 \015 \015 \015 \015 \015 Want Answer\015 0\015 \015 Clicking this will make more experts see the question and we will remind you when it gets answered.\015 \015 \015 \015 1 Comment\015 \015 Flag\015 \015 \015 \015 More\015 \015 \015 \015 \015 Print this page\015 Share this page\015 \015 \015 \015 ×\015 Moderate\015 \015 \015 Help this question get an answer\015 Is this question mis-categorized or about a different product? Help this question get an answer by entering the correct category or product below.\015 \015 \015 \015 \015 \015 \015 \015 \015 \015 Did you mean? Yes No \015 \015 \015 \015 \015 Cancel\015 Update (+2 points)\015 \015 \015 \015 \015 \015 \015\012\015 \015 \015 \015 \015 \015 Advertisement\015 \015\012\015\012\015\012\015\012\015\012\015 \015 \015 \015 \015\012\015 \015 \015 \015 \015 \015 \015 \015\012

Answers :

Go to acer.com.
Repair Help & Product Troubleshooting for Acer Aspire™ T180 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blank screen after boot up

This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Volume Control stopped working


At POST I get 2 short beeps - Dell Dimension 5150 (DIM515MIN) PC Desktop

It depends on the bios chip maker Here's some other beep codes: for Award and Phoenix BIOS: 1 short beep: Normal2 short beeps: CMOS error1 long and 1 short beep: DRAM error1 long and 2 short beeps: Video card ... Dell Dimension 5150 (DIM515MIN) PC Desktop

Cannot reinstall Windows XP pro to my hard drive which had it alr

I have found 2 websites taht can help you somewhat:\015\0121) this is the one with the steps that can help you, ... E-Machines eMachines Desktop PC

Building a new PC, cannot get LCD to work

You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

No 3D Cockpit / Higher resolution (Poor graphics)

Okay, this sounds like a graphics card issue. If it keeps going back to 1280 then your card or monitor cannot support it. The zoom issue can be reset by pressingf the backspace key, then use + or - key to zoom in or out. If the graphics card is no ... Microsoft Flight Simulator X for Windows

Cannot get monitor out of sleep mode

About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

My dell optiplex gx270 froze now will not come back on

Here try my trouble shooting steps. Some I usually follow this when I can't get a power up. My no-boot flow chart has always worked for me (many years work for Gateway tech support has paid off).\015\012\015\012So basically you canno ... Dell OptiPlex GX270 PC Desktop

I bought Acer Aspire 4920G Laptop, It is working but the graphics

Hi,I also have acer 4920 (not sure if "G" or not), which has Radeon Mobility HD 2400 XT graphics card, stated to have 256 MB memory and "up to" 1024 MB.I believe arjuun is in ... Acer Aspire 4720 Notebook

Cannot get my graphics card to work.

Go to acer.com. ... Acer Aspire™ T180 PC Desktop

Cannot get games to work once they have been installed. when you go to open the games say they cnnot open a file and the game will not start or simply game will not do a thing. tried installing the games on other computers and they worked. wondering if the touch scenn function is messing with the gaming and is there a way to fix it

You've not told weather its been working previously on your system or not...\015\012and if it were not working, then the reason should be the lack of graphic cards, diplay adapters (advanced), or media accelerator units.\015\012try typing "dxdiag" in ... HP TouchSmart IQ504 PC

Graphics Card buying help

Hi,First of all you cannot change the graphics card in a laptop computer, they are integrated.There aren't any external video cards for laptop gaming yet. There is a\015\012standard for removable laptop video cards called MXM, but few lap ... HP Compaq nc6320 Notebook

The monitor leaves a message no input signal, then " going to sle

That signal means the monitor is not getting any signal from the computer. It probably means your video card or connection is bad. You can buy a pretty cheap ($35-$100) video card from a local store (Best Buy, Circuit City, Radio Shack) or online. ... Compaq fs740 17" CRT Monitor

Monitor says Hi When power on - CPU fan works, graphic card fan works,PSU fan works,. DVD RW opens. Mouse & keyboard transmiter not working,DVD ROM not openning and i cannot hear hard drive working. Monitor is ok, cable ok, I replaced 350W PSU whith 300W in working order then reconnected every possible connetions in the box incl.reseated RAMS, CPU and replaced AGP graphic card with new one, but no luck. OS Windows XP SP2, Processor-3gH Intel Pentium 4, 8Kb primary memory cache,512Kb secondary ca

OK then I would basically do what was posted above except I have seen some motherboards that say to not power up the computer when you try to reset the bios. If it has a jumper to reset it, set the jumper to reset and leave it like that for a few min ... PC Desktops

I have an advent qc430 laptop which works fine until i move it, it then freezes. Also it works faster if I point the screen at the floor holdng the main laptop part at about a 45 degree angle. This seems a very strange problem....any ideas please?

Very display card using memory and if the memory is loss and need to find it but can't find it, so the system is halted. this also same like RAM that every PC have where it cannot function the computer also halted.Normally happening becau ... PC Desktops

Graphics card bought game called "Medieval 2 Total War", but when try to use get message "this program requires graphics card with pixel shader 1.1 or better". Cannot find what specification is for pixel shader for my pc. Any ideas how can get game to work ? Error message is: PIXEL SHADER UNAVAILABLE when trying to run game Pet Vet 2 I undated my drivers, but same message appears. Is there a program, software I can download

Unfortunately, it sounds like you will need a new graphics card to run that game. Pixel shaders are built into the graphic card hardware and there is no way to download or install them. According to the games system requirements you need a 100% com ... Dell Inspiron 8500 Notebook

Mag monitor doesn't display bios post

The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

What will you do if the cpu doesn't work? - Acer PC Desktops

Here is my flow chart.\015\012So basically you cannot get the pc to POST. Meaning you have just a black screen when you power on the pc, ... Acer PC Desktops

Replaced my power supply, now keyboard and monitor wont work.

This is so familiar.... sounds like you've toasted your mainboard....\015\012this could have been caused by a power surge, or by overclocking, or just when your PSU blew (it may have spiked your board as the voltage regulators failed), definate ... E-Machines eMachines Monitor E15T4

Gateway gt4010 blue light does not come on the fan run no vidio

So basically you cannot get the pc to POST. Meaning you have just a black screen when you power on the pc, right?First off, d ... Gateway GT4016 Desktop PC

840GM will not start up all the way

Here is my flow chart.\015\012So basically you cannot get the pc to POST. Meaning you have just a black screen when you power on the pc, ... Gateway 840GM (RB840GM) PC Desktop

S video output on HP dv2500

If Fn+F4 not working, you need check the BIOS on display options, see if it has been tick..if not try update the BIOS from web..if no any help above, the S-video port physical faulty ... PC Laptops

No signal input

This sounds like fried graphics card... the clue being the error message before it died, \015\012\015\012Does the PC boot so that you can see the Bios Screen, (the very first info that displays) the BIOS screen does not use the windows ... PC Desktops

After installing dungeon lords the screen blinks like it trying to open but then just closes

Sir,According to the minimum system requirements listed on the box, your\015\012graphics solution, be it onboard or external to the motherboard, must\015\012be able to render DX7 (transform and lighting) instructions in\015\012hardware! T ... PC Desktops

I get an input not supported error showing up on the screen when booting up the computer. However if I boot it up in safe mode i don't receive a message and everything works fine. While I was in safe mode I disable my Nividia Geforce 8800 GTS graphics card and I rebooted up in the normal mode and now its working. Is it something wrong with the monitor or my graphics card?And how can I resolve this issue?

Did you set the PC video out to the native resolution of this ACER? 1400 X 1050 60Hz.\015\012http://www.xbitlabs.com/articles/monitor ... Acer AL2017 20" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8409 seconds