Having problems with your Acer AL2416W Monitor ?

Monitor receiving signal, but no image

\015 When switched on, my Acer AL2416W monitor briefly displays the Acer logo and then screen goes black. The power switch on the monitor does not turn orange indicating the monitor has gone into sleep mode - it remains green meaning it is receiving a signal from the computer. Here's the troubleshooting I've done:- connected monitor to my laptop with original video cable for dual-screen display: worked for a bit and then went black- swapped out video cable: still black although my laptop seem to think the monitor was still working fine- set second screen (the monitor) to native resolution (1920 x 1200): still black- set second screen (the monitor) to low resolution (1024 x 768): still black- ensured refresh rate was 60Hz on monitor (there were no other settings available)- connected monitor to a friend's PC with original video cable: still black- swapped out video cable on friend's PC: still blackAlso note that the embedded menu for monitor settings (like contrast, centering, etc) does not display either. At this point, I can pretty much be assured that this is a display problem with the monitor. Any suggestions?\015

Answers :

Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another.
Hello!
\015\012
\015\012I see many monitor with that trouble.
\015\012When you turn on comp., you can have a picture on monitor about 10-30 min. and that go in black screen, or If you change resolution again go in black screen.
\015\012You must repair monitor or bay another.
\015\012
Repair Help & Product Troubleshooting for Acer AL2416W Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

HP desktop monitor problem


Hi try this ,,,\015\012\015\012\015\012Ensure the video cable is connected (and connected to the correct video port).\015\012\015\012Turn off the monitor using the monitor's power button and then restart th ... HP Pavilion a305w (DM181AR) PC Desktop

Monitor receiving signal, but no image


Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another. ... Acer AL2416W Monitor

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

Monitor shows on receiving signal, will not display image.


Hello,The Viewsonic VX2235WM has a known issue with the power supply going out. The flashing power light or no picture is the classic symptoms of this issue. Check out our web site at: www.ccl-la.com. We have a step by step repair guide p ... ViewSonic VX2235WM Monitor

No Image on Monitor Westinghouse L2046NV


Well i just had this problem this morning i woke up turned on the monitor and it came on but went out. but i soon found out it was not the display that is not coming on its the black light. if you look closely you can see the display but there is no ... Westinghouse L2046NV Monitor

Faint No Image / Backlight Out on Monitor Westinghouse L2046NV


Open up the unit. You should replace the damaged/bulged caps on it. You should also check the two MOSFETs before the transformers on the inverter section. If that does not do it, there's one SMD fuse beneath the card that normally blows when the MOSF ... Westinghouse L2046NV Monitor

Acer LCD Monitor only displays "acer" logo


You are correct, it could be a power surge that has caused it.\015\012\015\012Try this..\015\012Unplug the monitor from the wall.\015\012Remove all the video connections at the monitor end.\015\012Wait 10 minutes then pl ... Acer X193W LCD Monitor

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

Acer 1916W No image on screen any more.


As you can see at photos I post on photobucket.com, you will see mot monitors are bad due to bad caps. http://s807.photobucket.com/home/budm/allalbums ... Acer AL1916W 19" LCD Monitor

When I turn on my pc I an see the hard drive light working and flashing, indicating that it is loading up, but my monitor does not receive any video signal,so I hooked my pc to my freinds monitor and I got the same thing, no image, just red green and blue block lins that say no signal or no input from pc, any ideas about it?


Sounds like your video card is bad. You will need to purchase a new one. On some machines there is 2 video connectors -like 1 on the motherboard and 1 other mounted in a slot just verify that you have tried both connectors if you have them before buy ... E-Machines eMachines Desktop PC

Samsung 940B monitor, 14 months old. Power light on when connected to PC, but no images, not even menu or Digital/Analogue prompt. PC recognizes the monitors presence,any ideas please?


Monitors are passive components in a computer system. These just receive signal from the CPU. You may find another CPU and connect your monitor to it to test if it really doesn't work. If it works, this may just mean that your video adapter has a pro ... PC Desktops

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

I have a HP Pavillion Slimline S3500t; a few days ago the computer turned ff completely. Every time I have tried to reset it, or start it, the monitor give me an error message ''monitor going to sleep'' and does not receive any signal from the PC. Do you have any guidance? thank you,


When you boot the system, do you get any life at all in the monitor? Splash screen, perhaps? \015\012\015\012You could try to boot it to safemode (tapping the F8 key on boot) to see if you get any image. Other than that, it looks as thoug ... PC Desktops

HP Pavilion MX70 doesn't display any image but the PWR LED glows


... HP Pavilion MX70 17" CRT Monitor

Lcd montor not working help - Samsung SyncMaster 920NW Monitor


Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

Display will not come up, screen remains black, blue light on front of monitor flashes on and off


Check that the monitor is still receiving a signal it could have gone into standby mode.If not you either have a faulty inverter or the back light has gone, to test this when your computer is on is to check you can still see a faint image on th ... Gateway FPD1975W 19" LCD Monitor

Lcd doent come on


Best solution my A$$, I have the same problem - It is not PC, it is monitor related. Can't get to the bottom of it, but opening and closing it seemed to make it turn on - but the screen was all white.I realized I did not secure that tiny ... Gateway FPD2275W LCD Monitor

Can't sincronize with some video signals


... Marshall V-R842P-AFHD 8.4" LCD Monitor

Signal degradation across vertical section of


This appears to be a common complaint on LCD monitors. Some LCD screens have control issues.An LCD screen is the panel and a bunch of Line control chips wrapped around the outer edge. A problem with one line top to bottom or left to right is al ... iiyama Computer Monitors

No signal - ViewSonic Computer Monitors


You don't specify what kind of monitor, CRT, LCD, or even a TV attached to your system, you're using. It's likely the monitor is set to receive a certain kind of signal (either analog or digital) but it's receiving the other one instead. Before proc ... ViewSonic Computer Monitors

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4114 seconds