Having problems with your Acer AL2216WBD LCD Monitor ?

Two monitors blank, but on

\015 We have a dual monitor set up with two Acer widescreen monitors. When you turn the power on for them the Acer logo flashes on momentarily (but not as long as it had before) and then the monitors go black. The green power light stays on for the main monitor but now the other monitor light goes to the amber color. We can plug the cables for both monitors into other monitors and we can see both screen images just fine on the other monitors. When you move the cables back into the Acer monitors the image flashes on for about 2 seconds and then goes back to black. I don't think it's a graphic card issue since it works fine on other monitors, but we just can't seem to figure out what it could be. This is day three of the issue, and we were able to get them to stay on eventually after multiple on/off and plug/unplugging sessions but today they seem to be immune to that as well.\015

Answers :

<table x:str="" style="border-collapse: collapse; width: 124pt;" border="0" cellpadding="0" cellspacing="0" width="165"><col style="width: 124pt;" width="165">\015\012<tr style="height: 14.25pt;" height="19">\015\012 \015\012<td style="height: 14.25pt; width: 124pt;" height="19" width="165">http://www.wholesaleeshop.com.au/LCD-Monitor/10.4-inch.php</td>\015\012</tr></table><br />I wish you problem can be solution.\015\012<table x:str="" style="border-collapse: collapse; width: 54pt;" border="0" cellpadding="0" cellspacing="0" width="72"><col style="width: 54pt;" width="72">\015\012<tr style="height: 14.25pt;" height="19">\015\012 \015\012<td style="height: 14.25pt; width: 54pt;" height="19" width="72">&lt;a\015\012 rel='nofollow' href="http://www.wholesaleeshop.com.au/LCD-Monitor/10.4-inch.php"&gt;10.4\015\012 inch LCD Monitor&lt;/a&gt;</td>\015\012</tr></table>
Repair Help & Product Troubleshooting for Acer AL2216WBD LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

Monitor displays breifly then goes to blank screen


Well my Acer AL1711 finally gave up in as much as the screen flashed briefly at switch-on then went blank, regardless of brilliance setting so I decided to take it apart and try to fix it. The good news is that IT WAS NOT THE LAMPS that I feared in m ... Relisys RLT1720 17" LCD Monitor

Monitor goes blank


I was thinking about your problem, I just had a similar issue and the problem is that the inverter or the power supply with an embedded inverter had gone bad.The reason it goes black is because the inverter fails to provide power to the L ... Gateway FPD 1730 17" Flat Panel LCD Monitor

W1907 Monitor Goes Blank


If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

One of two monitors went blank. When I turned it


The problem can be the inverter board or worst case will be the lamps, you need to have spare lamps for testing, that is how I narrow down the problem to find out if the inverter is bad or bad lamps. see example here: ... MegaVision MV220 Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Monitor went blank


This is a generic symptom that could happen to any LCD\015\012monitor.\015\012\015\012The following is a generic answer applicable to most.\015\012\015\012\015\012\015\012Two possible causes are bad capacitors or a bad light inside\ ... Mag Innovision LT776s 17" LCD Monitor

After starup monitor goes to blank screen


Have you tried this on more than one PC with the same results?It sounds like one of 3 things...1: Power supply bad. really not much sense in replacing, since the cost of a new LCD is comparable2. if you have tried this o ... Sceptre X9g-Gamer (Black) 19 in. Flat Panel LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Laptop does a long beep, followed by two short beeps.


One long followed by two short beep IS a video error. However, your model laptop does not have a separate video card. The only fix is to replace the mother board. ... PC Laptops

Dell E173FPb 17" TFT LCD Flatpanel


Video cards that can handle two monitors at the same time have cables with two plugs on the monitor end.If your video cable has two plugs on the monitor end, try the other plug. ... Dell E173FPb 17" TFT LCD Monitor

The monitor goes blank after just a few seconds or sometimes works for hours.


Two possible causes are bad capacitors or a bad light inside the LCD panel.\015\012\015\012Open the unit and check to see if any of the capacitors in the power supplyor other boards look domed or vented on the top.\015\012\015 ... ViewSonic VX924 19" LCD Monitor

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.\015\012I redo many of these.\015\012If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.\015\012Fran ... Proview PL926WBi 19" LCD Monitor

LG1717S - Power light flashing - no image.


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG L1717S-BN 17" LCD Monitor

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Monitor goes blank after it comes on for two seconds


Bad capacitors on the power board internal to the monitor they need to be replaced, let me know what you would like to do ... Gateway FPD2275W LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Screen goes blank


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Dell E173FP 17" LCD Flat Panel Monitor

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Monitor does not turn on


Normal 0 false false false MicrosoftInternetExplorer4 \015\012 /* Style Definitions */ table.MsoNormalTable\011{mso-style-name:"Table Normal";\011mso-tstyle-rowband-size:0;\011mso-tstyle-colband-size:0;\011mso-style-nosh ... Dell E173FP 17" LCD Monitor

Samsung 913v Self Test fine but screen goes blank in seconds


Monitor is definitely going bad, one thing you may want to check, if you can get in the back of the monitor you'll uncover two boards, a power board and a main board. Look for any capacitors that are puffy. Instead of a flat silver top they will ha ... Samsung SyncMaster 913V 19" LCD Monitor

Monitor displays breifly then goes to blank screen


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After going blank, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012screen, not directly but ... Gateway FPD2275W LCD Monitor

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

Blank screen for 15-20 minutes at startup


I have a Xerox XA7-19i. It has the same problem as described by many\015\012others - intermittent fault with the display that manifests as a white\015\012screen when the monitor is first switched on. After a few trys of\015\012switching on and off, t ... Xerox XG-91D 19" LCD Monitor

Monitor displays breifly then goes to blank screen


Try booting up your CPU again, while on its process of booting press F8, then select (something MODE), okay, then when you are at windows environment go to control panel, select display, set your display settings its default or 900 by 600 pixels sett ... Dell Dimension 4600 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6277 seconds