Having problems with your Acer AL2216WBD LCD Monitor ?

ACER MONITOR SAYS 'NO SIGNAL'

\015 I PURCHASED AN ACER DESKTOP SATURDAY, SET IT UP AND EVERYTHING WAS WORKING FINE, I WAS SO HAPPY. THE SYSTEM TOLD ME I HAD TO RESTART, WHICH I DID AND NOW WHEN IT COMES ON I RECEIVE A 'NO SIGNAL NOTICE ON THE MONITOR SCREEN. ALL LEADS ARE CORRECT. I TRIED ADDING TWO OTHER MONITORS THAT I HAVE TO THE SYSTEM BUT I RECEIVE THE SAME MESSAGE. IM AT A LOSS AS TO WHAT I CAN DO BECAUSE I HAVE NO SCREEN. TRIED TO GET HELP FROM THE COMPANY BUT THEY ONLY OFFER SUPPORT DURING OFFICE HOURS !!!! PLEASE, IF YOU CAN HELP I WOULD BE GRATEFULL. PREFERABLY IN EASY TO UNDERSTAND TERMS. THANKS DENISE\015

Answers :

Looks to me, from your description, that the cable contact with the video port is bad. I would make sure things are firmed up at tat end, Sometimes, the video card itself gets unseated some, and needs a gentle push down that seats it back with renewed contact....

-Wick.
Hi Denise!

First things first, try the monitor with other computers.. If the monitor is functioning then there must be something wrong with the VIDEO CARD or BUILT IN VIDEO ADAPTER for the computer. My guess would be the video processor is not working and one probable solution is to purchase a new video card.


Second Case:
You might have changed the video resolution into something it cannot display. Like setting a 1280pixels x 800 pixels @ 32 bit. to a 15" monitor. 15" monitors or any other monitor in this case may not have support for higher graphics. Stick with 1024 x 768.

Solution: Reboot the computer on safe mode and set the necessary display settings to the lowest.

Hope this gives you an idea.


Repair Help & Product Troubleshooting for Acer AL2216WBD LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Acer monitor lcd problem


... Acer Professional P211 21" CRT Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit


This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

No Signal I just plugged the ACER AL1912 to replace a working Dell monitor. The monitor powers up and I get the ACER logo to pop up, but moments later I get a box to pop up saying no signal then the monitor shuts down


Not all monitors can display the same resolutions. You may have has the Dell monitor set at something the Acer can not handle. Try rebooting and if you can see the Dell startup screen press F8 as soon as it disappears. This will give you the Windows ... Acer AL1912 19" LCD Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

The screen is broken and i need to connect it to a pc monitor in order to get data off but the monitor is saying no signal.... it showed the windows startup but then turns off


Most likely, that's because the video resolution or frequency is not set correctly for the "new" monitor. i am assuming that you are NOT ref'ing to a laptop computer being the one you need data from...your best bet will be to begin tappin ... Acer PC Desktops

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

No signal from monitor


When u power up the computer pressF8 key then enter in enable vga mode.\015\012then if u r able to enter in there then change screen resolution.\015\012And if u r not able to enter then check cabel from computer to monitor .\015\012 ... Acer AL1916W 19" LCD Monitor

ACER MONITOR SAYS 'NO SIGNAL'


Looks to me, from your description, that the cable contact with the video port is bad. I would make sure things are firmed up at tat end, Sometimes, the video card itself gets unseated some, and needs a gentle push down that seats it back with renewe ... Acer AL2216WBD LCD Monitor

Monitor saying no signal


You need to return to where you bought this because it is still under warranty, you can not open this because the warranty will be cancelled once the stickers will be damaged ... PC Desktops

Problems connecting my acer laptop with tv


Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook

Acer al1713 monitor and the power led flashes form yellw to green


The short answer, replace all of the capacitors. They can be bad without swelling. And there may be one 47mf/16v off to itself, if it fails, monitor will not come on. Also, check the menu or mode setting to make sure your VGA/DVI agrees with the cabl ... Acer AL1713 17" LCD Monitor

I have an Acer X1700 desktop - 3 days old by the way. Runs Vista Home Premium. 1 day after arrival, pushed power button. Monitor light is blue, flashes the Acer logo, then says "no signal" and blue light turns yellow. The fan in the tower which operates very quietly, normally, is very loud at that point. Have been able to power down the tower and the monitor, unplug all from the wall, hold the power button on the monitor down for 20 seconds or so, turn it all back on, and then it boots just fine


I would get ahold of acer. It should be under warrenty. sounds like a hard drive issue to Me. Just because it is new doesn't mean it was right from the start. My neighbour had the same problem with his acer. I told him to but a dell or hp. good luck. ... PC Desktops

Monitor switches to standby when I attempt a connection


When you power up the computer check NUMLOCK Led on key bord if it is on and off when you pressnum lock then your cpu gives dispaly to monitor correctly.But if not then refix RAM memory in cpu.then when you power up the computer press F8 ... Acer AL1932D 19 in. Flat Panel LCD Monitor

Monitor not working


On the laptop, you'll need to change the video mode so that the laptop knows to send the signal out the VGA port. The two common ways of doing this are to find the Function key and the monitor toggle button. It's usually one of the F-Keys at the to ... Acer PC Laptops

Bought a new computer. Getting no signal from my multisync 1700V


Check the device manager and see what it says for the monitor...I know you can press CNTRL+ F5 for monitor selection , try this if everything is good in device mngr ... NEC MultiSync LCD1700V 17" Flat Panel LCD Monitor

New video card wont work, acer monitor no signal


Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.after you have used the bios to switch back to the AGP you can start widows in safe mode to acc ... Acer X193W LCD Monitor

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Are acer monitors unable to pick up HD video inputs?


There are two types cable to connect to LCD Monitor. VGA and the other is DVI,ight need DVI cable it has flat pins and is larger than the VGA small round pin models. ... Acer X193W LCD Monitor

NO Signal, check cable


Hi there,you can enable a second monitor when it is plugged into the rear vga-jack while windows boots up and auto-detects it.-by right-clicking on the desktop background, goto: properties - display -settings- advanced ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6563 seconds