Having problems with your Acer AL1916W 19" LCD Monitor ?

Acer al1922 monitor no signal:

\015 When the monitor is turned on it appears to work - the "acer" name comes up and then the words "no signal". As soon as no signal comes on the sceen it goes to black and the light turns orange. The pc has a new video card installed and tests okay on other monitors, a new cable between pc and monitor has been installed also - still no success\015

Answers :

If it does the same with other PC then you need to open it up and first thing to look for are bad caps in the power supply, see example of failed monitors due to bad caps, transistors, transformers, lamps: http://s807.photobucket.com/home/budm/allalbums
\015\012Post back what you see inside, and always replace with good quality caps such as PANASONIC FM or FC series from DIGIKEY.
Repair Help & Product Troubleshooting for Acer AL1916W 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Acer al1922 monitor no signal:


If it does the same with other PC then you need to open it up and first thing to look for are bad caps in the power supply, see example of failed monitors due to bad caps, transistors, transformers, lamps: ... Acer AL1916W 19" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Acer LCD Monitor only displays "acer" logo


You are correct, it could be a power surge that has caused it.\015\012\015\012Try this..\015\012Unplug the monitor from the wall.\015\012Remove all the video connections at the monitor end.\015\012Wait 10 minutes then pl ... Acer X193W LCD Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

Monitor receiving signal, but no image


Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another. ... Acer AL2416W Monitor

We are getting a No Signal on our monitor,


I have a Acer Aspire M1202 and got the no signal on the monitor it was the power supply. My was a short in OEM power supply unit. ... Acer Aspire L100 PC Desktop

Acer AL1716 (black) - Drops to No Signal -


If you google this problem. you will find that acer monitors have this problem. They pretty much all do. Its an annoying problem but there is no fix. The only way to remedy it is to unplug the monitor and plug it back in when you get this error. pret ... Acer AL1715 (Black, Silver) 17" LCD Monitor

No Signal I just plugged the ACER AL1912 to replace a working Dell monitor. The monitor powers up and I get the ACER logo to pop up, but moments later I get a box to pop up saying no signal then the monitor shuts down


Not all monitors can display the same resolutions. You may have has the Dell monitor set at something the Acer can not handle. Try rebooting and if you can see the Dell startup screen press F8 as soon as it disappears. This will give you the Windows ... Acer AL1912 19" LCD Monitor

Same problem, acer sucks imo


Similar problem with Acer AL2216W - sometimes DVI input don't work properly (but analog in works well in the same time) and I have blackness on panel - I just need to change resolution on my ATI video card for a moment and return to native 1680x1050 ... Acer AL1916W 19" LCD Monitor

Acer Monitor Doesn't Receive Signal From Computer


Can you test your monitor on another computer to verify the monitor is at fault? If the monitor is at fault its time for a new one, factory warranties on monitors are usually 1 year unless you purchased an extended warranty.Otherwise repair is usuall ... Acer 17" AL1706B LCD Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

Acer monitor lcd problem


... Acer Professional P211 21" CRT Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Acer Aspire M1640 PC monitor 'no signal', tower non-responsive.


I found the same problem (can't load BioS) but we are not alone as you can see on web about M1640 and M1641 it's very popular defectI made various test: cpu (pentiun e2180) pass the test mounted on another PC.I removed the two ram a ... Acer Aspire M1640 Refurbished Intel Desktop PC - Intel Pentium Dual Core E2160 1.8GHZ, 1GB DDR2, 120

No signal issue


Sounds like you could have a capicitor problem, which is fairly inexpensive to have fixed - before going down that route - If you only connect up the suspect monitor to your PC and disable dual screen using the cables (power and signal) from the one ... Acer AL2017 20" LCD Monitor

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit


This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

Black screen on my Acer 203wbd monitor. Keep getting No Signal message. Have checked all connections.


Try another monitor on your computer. If you get video with another monitor then you know that your original monitor is bad. If you don't get video with another monitor then you know its something with the computer.If the computer is th ... Acer PC Desktops

Acer monitor AL1716W 'no signal"


You will need to download the drivers for this monitor. Your laptop already has them installed. ... Acer AL1716 F Monitor

Get NO SIGNAL on Acer M1640~Monitor is Fine~Is CPU


Try removing the system memory and clean the brass contacts and the slots it goes into, then reseat the memory and try to boot again, the memory looks like this >>>>>>> ... Acer Aspire M1640 Refurbished Intel Desktop PC - Intel Pentium Dual Core E2160 1.8GHZ, 1GB DDR2, 120

Acer lcd monitor ''no signal''


It is screen resolution problem.when you power up the computer press F8 key thene nter in enable vga mode then go to diaply property and set screnn resolution to 1024*768 thenh apply and ok. ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5530 seconds