Having problems with your Acer AL1703 17" LCD Monitor ?

Extrenal monitor does not receive signal from acer. The monitor connects easily but does not show the acer screen.


Answers :

Make sure you are using the Fn key and toggling the F4 monitor key to select between the monitors or to use both... not sure if it's F4 on an Acer but look for the key that has two computer screens on it.
Repair Help & Product Troubleshooting for Acer AL1703 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Extrenal monitor does not receive signal from acer. The monitor connects easily but does not show the acer screen.


Make sure you are using the Fn key and toggling the F4 monitor key to select between the monitors or to use both... not sure if it's F4 on an Acer but look for the key that has two computer screens on it. ... Acer AL1703 17" LCD Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Monitor receiving signal, but no image


Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another. ... Acer AL2416W Monitor

Gibberish + won't finish loading Windows


Remove the new memory first. if that does not help you may have some a virus, indicated by safe mode workng fine. One other thing i found would do that is a damaged Hard drive, not to likely here because safe mode works. ... Dell Dimension E521 PC Desktop

Blank ACer X221W Monitor


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After it went dim and blank, you have to\015\012check if you can see the image on the screen or not by shining a flashlight into the\015\012s ... Acer X221WSD Monitor

ACER MONITOR SAYS 'NO SIGNAL'


Looks to me, from your description, that the cable contact with the video port is bad. I would make sure things are firmed up at tat end, Sometimes, the video card itself gets unseated some, and needs a gentle push down that seats it back with renewe ... Acer AL2216WBD LCD Monitor

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Acer Aspire 9303WSMi - 17" LCD Screen is showing coloured static..


Dir sir i have acer laptop moddel No aspire 9303wsmimfg.date: 070226 now my laptop matherboard not working and not showing display after the press start button the prosser fan runing for a while and stop no show any display on the s ... Acer Aspire 9300 Notebook

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Acer lcd monitor ''no signal''


It is screen resolution problem.when you power up the computer press F8 key thene nter in enable vga mode then go to diaply property and set screnn resolution to 1024*768 thenh apply and ok. ... Acer AL1916W 19" LCD Monitor

Laptop screen not working


Hi, I'm a laptop technician and if the screen is blank as in there is nothing showing on the screen at all (even when the laptop first starts up), but the laptop sounds like it is starting normally then the backlight or invertor for the laptop screen ... Acer Aspire 5002WLCi Notebook

Acer al1711 shows only a white screen


These are pretty old now but I'll respond anyhow-\015\012\015\012When there is absolutely no screen content and white, it means that ALL pixels are turned off; black, means all are turned on.\015\012If you have a white screen, it means that a c ... Acer AL1711 17" LCD Monitor

Screen on desktop shows blue - Dell Dimension 3000 PC Desktop


Many monitors will produce a blue screen when they are receiving no input signal but most will give you some kind of alert on the screen to let you know the monitor is not at fault.\015\012Try disconnecting the video cable from your system to s ... Dell Dimension 3000 PC Desktop

Connection to external monitor stopped working


Did you go to the display properties screen and check the settings of the second monitor connection. You must turn it on, and have it set to a low enough resolution for the monitor to work. If it shows the second monitor, Click Identify and it will ... Acer Aspire 5720 Notebook

LG LCD Monitor won't exit Power Saving Mode


Does your desktop/PC display show anything before the monitor goes into power save mode? If nothing comes up, its possible that you have a loose VGA connection or that your video card/ ... LG Computer Monitors

The screen is broken and i need to connect it to a pc monitor in order to get data off but the monitor is saying no signal.... it showed the windows startup but then turns off


Most likely, that's because the video resolution or frequency is not set correctly for the "new" monitor. i am assuming that you are NOT ref'ing to a laptop computer being the one you need data from...your best bet will be to begin tappin ... Acer PC Desktops

Black Screen on ACER LCD 1916 Monitor


See there is power in monitor and check also that your monitor is getting signal from cpu just remove the data vga data cable from cpu and see is it showing any massage on screen like check signal or any other massage. and check your keybord also by ... Acer AL1916W 19" LCD Monitor

Monitor works at Startup, then goes black


Yes you can fix this problem go in to start menu then control panel then double click display, then screen resulution and add the secondary screen, bc windows doesn't add the screen automaticlly you have to do it this way ... Computer Monitors

"no signal" princeton screen won;t work anymore, it now only shows a "no signal" screen adn shuts off, tried replacing coord, moving coord to other ports and tried different coord al together. nothings working still get smae signal.


"no signal" means that the monitor is not receiving a video signal from your computer or laptop. This is normal if the compouter is OFF and the monitor is ON. Is the computer still on and connected to the monitor? ... Princeton Digital VL1514 Monitor

I am working a computer an Acer Aspire M5640 desktop with Windows Vista Home Premium. The system would not boot. When I took a look and turned it on and the monitor has "no signal." There is no splash screen and I cannot even see the POST. I tried it with one of my monitors. Same thing; nothing showed up on the screen. The blue power light turns on and the case and power supply fans work when you push the power button. I opened up the case and removed the RAM and disconnected and then reconnecte


Nothing showing up on the screen, definitely not a monitor issue the way you describe it. And you did all physical repair checks and such? Then the most likely problem I see is with the operating system. Windows Vista is so glitchy that any number of ... Acer Aspire m5640 PC Desktop

"No signal" msg on new Acer X193W LCD Monitor with Vista 64-bit


This should be easy...go to your desktop...right click on it and choose "personalize" it will open up a window. on the bottom it will say display settings...click on it...at the top right it should say "identify monitors" click on that...if that dose ... Acer X193W LCD Monitor

No Signal I bought a Acer AL1916W 19" LCD Monitor today and installed it. I have one IBM think pad, operating system is windows xp. when I powered my LCD monitor on, it shows ACER then "no signal" . cant fix the problem. Please help. Taufiq


Probably the settings on the computer graphics card output.\015\012You need to selct the external screen.\015\012\015\012Just to be sure it's not a screen fault, are you able to test it on another PC (desktop, not laptop)? ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8433 seconds