Having problems with your A-Top XBlade Mid-Tower Case ?
PROBLEM WITH MOTHERBORD AND TOWER SLOT ALINEMENT
\015 Ok i bought a computer off ebay it has a xblade tower with a conroe 1337-D667 motherboard inside i went to put my graphics card and sound card in and found that the slots do not aline with the casing what can i do? thx\015
Well not all sound and graphics cards are for all motherbords i am sorry to say this but bay a new motherbord or better cards.hope i was usefull plzzz plzzzz plzzzz rate me.thx
Repair Help & Product Troubleshooting for A-Top XBlade Mid-Tower Case
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
PROBLEM WITH MOTHERBORD AND TOWER SLOT ALINEMENT
Well not all sound and graphics cards are for all motherbords i am sorry to say this but bay a new motherbord or better cards.hope i was usefull plzzz plzzzz plzzzz rate me.thx ... A-Top XBlade Mid-Tower Case
Emachine t5026 on and right off
Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops
My Dell optiplex 170L keeps turining off and then
Possible that it's caused by a faulty hardware or a computer virus on your computer. For us to isolate the issue we must start troubleshooting with the hardware1. Remove all the connection at the back of your computer2. Power cycle ... Dell OptiPlex 170L PC Desktop
HHHHHEEEELLLLPPP!!!!!!! Ok so I thought it wouldn't be a problem to install more RAM on my computer. lol it turns out I was obviously wrong. So I plugged the cords back in inside the tower and outside. The PC instantly turned on when I plugged in the main power cord. That's obviously not right. Additionally, it appears as though there was nothing plugged in, the monitor stays blank- as though on standby, since the amber light stays on. Does anyone have any ideas? Please! This problem is so tire
The memory you installed was causing a NO-POST. The fact that it heated up indicated that it was either installed wrong, was the wrong RAM, or was faulty.\015\012\015\012You can get the correct RAM here:\015\012\015\012 ... HP Pavilion A1050y (PU131AV) PC Desktop
It is stuck in power saver mode tried every thing can not get in come back up. Tried turning off and on, unpluged and pluged back in, put in cd, tried starting in safe mode with F8 key.
Possible that it's caused by a faulty hardware 1. Remove all the connection at the back of your computer2. Power cycle your computer tower by pressing the power button for 15 seconds3.\015\012Plug the power cord back in and mo ... Acer Aspire AM5641-U5520A PC Desktop
The beeping sound of the emachine desktop T3414 makes a long beeping sound for 4 seconds flat and pauses for 2 seconds and repeats the process. Hope this is a broader explanation of the problem. Thanks.
Open cpu cabinet.Then refix RAM memory.Pull processor fan and then processor remove dust from all parts and circuit.Reattach both processor and its fan.then check if still face same issue.Then pull cmos cell from motherb ... E-Machines eMachines Desktop PC
System is not booting but only fan runs very fast & noisy
Try the following steps I'm doing to fix such problem like that or maybe pin point the root cause of the problem or the reason it happened. 1. Try to disconnect all the connection at the back of your computer\015\012tower then press the p ... Lenovo ThinkCentre® A51 PC Desktop
My computer spontaneously goes into power save mode
I just had this problem exactly and it ended up being the memory card slot....which in turn means the whole motherboard. I went thru tech support and luckily my computer was still under warranty. You can check if it is this by unplugging computer, ... IBM IntelliStation M Pro 6219 PC Desktop
Replaced time/date button battery now not powering up although all indicators show power
You can try the following steps I created.1. Try to disconnect all the connection at the back of your computer\015\012tower then press the power button of your computer for 15 seconds to\015\012drain the remaining power.2. Rec ... Fujitsu Siemens Celsius 670 (LKN:SWD-670115-031) PC Desktop
After press push buttom , power not on , fan not on ... as dead
It might be the power supply that is dead or motherboard or together. 1. Try to disconnect all the connection at the back of your computer\015\012tower then press the power button of your computer for 15 seconds to\015\012drain the remain ... Dell Dimension 1100 PC Desktop
2350 added ram now computor will not boot
A couple things.\015\012\015\012#1 Before you started inserting and removing RAM, did you have the power disconnected? Did you blead the stored power in the motherboard by holding the power button after unplugging? Not having power rem ... Dell Dimension 2350 PC Desktop
3 beeps and fan running at start up
The three beeps shows the Memory Module Test and that symbolise that the memory module is having a problem and to my knowledge when there is a problem with the memory then you have to open the casing and remove the memory module and clean the slot ve ... Gateway GT5408 PC Desktop
Tower Beeping Hi Guys, I am using the Samsung SyncMaster 152N and every time I try to turn it on the tower just keeps beeping and nothing shows up on the screen. I haven't used the computer in a couple months but I haven't moved it either or done anything to it. I checked to make sure everything was plugged in right and it is... Is there anytd? I can do? Or is my computer officially dead? Please help! Casey
As I can see the problem is not monitor but your PC if computer chasis beeping, depends on number of beeps the problem can be VGA card one long beep and 3 short or RAM if it beeping one by one short beep and finaly CPU if it continuosly beeps like po ... Samsung SyncMaster 152N 15" LCD Monitor
Power/Startup Fail Hi there. My HP a6040a is almost 2 years old, with no problems except needing a new graphics card, until now. It just will not turn on. We've checked all cords, unplugged and rested capacitors etc etc, but no luck. The power supply light (green LED) is on fine, and the monitor is fine, but the blue light on top of the tower refuses to come on. Any ideas? Cheers, Beth.
There may be problem with some wire connections or RAM is loose in the slot. insure that RAM is perfectly tight in the slots. ... PC Desktops
My monitor does not light up but just clicks - PC Desktops
If ur monitor is not coming up... check uplugging the monitor cable from the tower.... if u receive a msg on screen "No input signal" or "No VGA Signal" then Monitor is working fine... if not received monitor is not working properly.if Mo ... PC Desktops
Monitor comes up shows "acer" then says no signal and goes black
The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor
Audio problems I have had this pc for a few years now and I have never been able to get the audio to work. When I go to control panel to adjust the audio settings ,when I turn the volume up it automatically turns itself back all of the way down.. Does anyone know a simple solution to fix this problem?
I have the same problem and i have come to know that the problem is with the sound card it pops out of the slot inside the casing of from the motherboard. i have tried several things but, it works for few days and then it poups out again. its only ... Compaq Presario R3000 Notebook
Oh Ram Slots - Where for art thou??
Hello,You said "looking next to current ram". Are you sure those aren't your ram? They are different that a tower ram slot. Laptops take SODIMM which lay flat in a laptop.Bypassing all the above the only other option is to rem ... PC Laptops
Do I have a ir on my tower
Hello,I recommend the Acer line of products all the time and love working on them when they come in for upgrades.You probably do not have IR installed or you'd have a transceiver attached to your tower.. You probably have a co ... Acer Aspire E380 ASE380-UD500A PC Desktop
Dosen't boot I turn on the computer and there is no keyboard,mouse or monitor response
Open cpu cabinet.Refix RAM memory.Clean dust from all parts.Reattch ATX power connector from smps to motherbord.Pull cmos cell from motherbord for 10 minutes so all settings are defaults.REmove pci cards from pci slot of ... HP PC Desktops
Help my pc is not detecting the correct amount of ram installed
Okay, first things first. IF the memory you installed is 1024 and you are using the on board video and it is 512 MB, you will only have 512 MB usable memory. This is because the on board video uses the installed memory to function. What ever the vide ... PC Desktops
MY GATEWAY 702GE DESKTOP TURNS ON BUT NOTHING HAPPENS. THE MONITOR WILL NOT TURN ON AND THERE ARE NO BEEPS.
First open cpu cabinet.\015\012Refix yopur ram memory.\015\012Then pull cmos cell from motherbord for 10 minutes so all settings of motherbord are defaults.\015\012Then check .\015\012If still face problem then remove all PCI ... Gateway 702GE PC Desktop
When i switch on a repeating beep comes from the tower and the monitor does not come on . Hope you can help. Sean
Seems like one memory module is faulty/damaged. But BEFORE trashing the module, clean the slots and the chips and try them again. In some Compaqs the processor fan sends the dust to the memory banks producing shorts. You can learn about the beep code ... PC Desktops
My usb modem keeps disappearing one minue it is there and on divice manager and then the next it isnt. just keeps falling off I have reinstalled both the usb and the modem and nothing seems to stop it. its as if the usb is switching itself on and off and then puter says not present
Hi there!\015\012\015\012I'll try and help you out with your problem.\015\012\015\0121. Have you tried a different USB slot at your computer? (Preferebly the USB port at the back of the CPU/ tower should be used)\015\012 ... PC Desktops
When I turned on my computer this morning the screen did not come on. What could be the problem?
First open cpu cabinet.Then Refix your RAM memory .Reattach ATX power connector from SMPS to motherbord.Remove pci cards from PCI slot.Pull cmos cell from motherbord for 10 minutes so all motherbord settings are defaults. ... Acer Computer Monitors