Having problems with your PC Desktops ?

How do you get a computer out of preparing to run system set up? it stays stuck there


Answers :

Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong.

\015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012
Reinstalling from Windows

If you are able to get into Windows then you should start off by putting your Windows CD into your CD-ROM drive. Close down the automatic pop-up screen that appears when the disk autoruns and then open Windows Explorer. Point explorer at your CD-ROM drive and in the root of the drive you will find a file called SETUP.EXE. Double-clicking this file will start the installation of Windows. Skip to ‘The reinstallation procedure’, below.

Reinstalling from DOS

If you can’t get into Windows then you are going to need to use your boot disk to see your CD-ROM drive. You should have a boot disk already – if not then you should elsewhere in this article for information on creating one. Once you have this disk you should boot your computer with it in your floppy drive and restart your PC. Once the disk has booted, put the Windows CD in the CD-ROM drive, switch to the relevant drive (by typing the letter of the drive followed by a colon, such as D: or E:, and pressing [Return]) and then type SETUP.EXE and hit [Return]. Windows will now start reinstalling itself.



\015\012
\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012
How to create a boot disk if you can’t get into Windows



Boot into DOS (press [F8] on startup to bring up the boot menu). Put a floppy in your drive and type format a: /s. This will create a bootable floppy disk. The next stage is the crunch point – you need to find the system-configuration file for your CD-ROM drive and copy it to your floppy disk.



Next you need to copy the Microsoft CD extension on to the floppy disk. Enter COPY C:\\WINDOWS\\ COMMAND\\MSCDEX.EXE A: and hit [Return]. If this file isn’t there, it’s corrupted, so you need to find it. To do this in DOS you should type DIR /S MSCDEX.EXE, to search your drive. Once you find it, copy it on to your boot disk.

Next, make your floppy recognise the CD drive when it boots by creating CONFIG.SYS and AUTOEXEC.BAT. In DOS type A: to take you to the floppy drive. Next, type EDIT CONFIG.SYS. Type in device=< 'drivername'>.sys /D:mscd001, where 'driver name' is the name of the .SYS file from step two.

Save your CONFIG.SYS file. Next we need to create the AUTOEXEC.BAT file. Create that file by typing EDIT AUTOEXEC.BAT. Once this file comes up you should type MSCDEX.EXE /d:mscd001. Save the changes out to your disk.

\015\012uparrow.gif\015\012\015\012\015\012 \015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012








How to create partitions in DOS

FDISK is a powerful utility, and relatively straightforward to use. Remember that you’ll lose all your data as soon as you create a new set of partitions, and you’re away…

Boot from your floppy disk and make sure you can see your CD-ROM drive, as you are about to leave your old setup. Once happy, type FDISK to start Microsoft’s partitioning program.



Select option 3 to delete partitions and delete everything. Once you’ve done that you can create your partitions again. Select option 1 and then 1 again to create the primary partition to the size you specify.

The next step is to create your extended partition. Select option 1 followed by option 2 to start creating this second area. When prompted you should make the extended partition use all the space left.

The last step doesn’t actually create any logical partitions – you have to create these yourself in the extended partition. FDISK will automatically prompt you for the first one, just set it as big as you want.

Finally you should check that all the partitions are set up as you want them by selecting option 4 from the main menu again. Once happy with your setup you need to re-boot and then format your drives. \015\012
\015\012\015\012\015\012Reinstalling\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012


What you need
- 45 minutes of free time.
- Your Windows Product Key.
- Another blank floppy disk.

Don’t forget!



First, insert your boot disk, switch on and ensure your PC is set up to boot from the floppy drive – if it isn’t, enter your BIOS, select your floppy drive as the first bootable drive, and save your changes and exit. You should be presented with a menu. Choose the option to start with CD-ROM support.






Next you choose your set-up options. ‘Typical’ is the normal choice, ‘Portable’ is for installing Windows on a laptop, ‘Compact’ saves disk space by not installing optional components and ‘Custom’ is ideally for advanced users. We’d recommend you choose Typical.


During the next stage of the installation Windows installs software drivers for any plug-and-play devices you have attached to your system. After that, various Control-Panel settings are decided. You need to choose your geographical location in the Date and Time Properties dialog box.

Next you need to reinstall your monitor drivers. The Add New Hardware wizard will appear and try to locate drivers for your monitor. If you’ve got them on CD or floppy then put the disk in now and select Let Windows Search for Drivers. If you haven’t got any handy then you can choose Display a list of drivers in a specific location. Choose the default plug-and-play monitor.

The default monitor will get you into Windows, but limit you to 640x480 screen size with 16 colours. Once you’ve installed your monitor driver, install your graphics-card drivers. That’s it, Windows is reinstalled! Now it’s time to turn to move on into the post-install phase… \015\012
\015\012\015\012\015\012Post install\015\012loadTOCNode(1, 'summary');\015\012\015\012
\015\012\015\012\015\012\015\012\015\012\015\012
Finally, your installation is complete and you’ve got a working version of Windows. A quick look at your Windows folder will probably reveal it’s about half the size it used to be, which means your PC is not only going to run faster,

Finalising hardware settings

To find out exactly what Windows thinks you’ve got installed, right-click on the My Computer icon and choose Properties. This will bring up the System Properties dialog box. Switch to the Device Manager tab and have a look to see if all your hardware is listed.

If a device has a yellow triangle with an exclamation mark next to it then it’s got a problem. Highlight the device and click Properties to get more information about what’s wrong. It’s usually the case that reinstalling the software drivers from your backups will solve the problem. Occasionally, if Windows is being really stubborn, you might need to remove the device from your hardware profile altogether and reinstall it through the Add New Hardware Control Panel before it starts to work.

.

It’s all over

, you now have a fresh installation of Windows. Once you’ve set your system up you might like to consider creating a drive image. Next time you want to reinstall Windows you simply copy this back on to your C: drive – this gets the job done in half the time and without the worry of setting it all up again.

Reinstalling your hardware

Run Add New Hardware from the Control Panel and Windows searches for plug-and-play devices that aren’t properly installed, producing a list like this.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

17 inch monitor goes blank - X2Gen MG19MY 19" LCD Monitor


\015\012Prepare to diagnose the computer .\015\012\015\012\015\012\015\012Disconnect all peripheral devices.\015\012\015\012Perform a Hard Reset.\015\012\015\012Disable th ... X2Gen MG19MY 19" LCD Monitor

Emergency Room: Code Blue


If its a very old game then it might still run on dos. dos is the old operating system. you could run two opperating sytems if you want to do that then read this that i found on runing two opperating sytems\015\012\015\012First you need t ... Legacy Interactive Emergency Room: Code Blue for Windows

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Reloading windows xp


Replacement Drive? If you are talking about a Hard Drive the answer is: You can buy any hard drive as long as it is the same type from any computer store. Take your Hard Drive to the store and tell the sales person that you want another hard drive ... Dell Dimension 4600 PC Desktop

Canonscan D646U TandN, I'm getting crazzy ! I followed the steps you wrote, but after downloading I received taht message: "could not create - unzip operation cancelled". My OS is XP. And now, whatelse can I do? I live in Brazil, but the brazilian Canon site simply does nor answer me... Can you help me again? Thanks a lot !


You might have spyware blocking your computer. Or you hard drive could be full. Try the next steps and be patient. Rome was not built in a day. LOL Computer programs were not either. Get back with me after you try this and explain to me what you ... Computer Utilities & Maintenance

I have a toshiba satellite m55-s3314 and the other night it turned off when i booted it down and then the next day woudlnt turn back on. Took it to BBuy and they said it was a bad hard drive....bought a Western digital 2.5 edie internal HD took the old one out put the new one in and when i start my lap top up all i get is the power button on and the battery led stays on. the hard drive led blinks a few times then goes out the screen stays all balck....i would have thought at least that would co


First off, a bad hard drive does not keep your computer from starting....you would get a warning in text on the screen saying no operating system found, or a PXE code but you would still see something on the screen. You would see the Toshiba splash s ... Toshiba Satellite M55-S3314 Laptop

Regarding hard drive space


Go into you computer properties and change the amount of restore space. There is not reason for 20 gig of restore space. I actually turn restore off onall of my computers. Restore keeps viruses ans spyware in your computer. Even after you think th ... Compaq PC Laptops

Sony Vaio VGN FS980 laptop stuck in Boot Loop after viral infection. How do I get out of this and get past the boot loop and the Blue Screen?


What I usually do in this situation is remove the harddrive from the infected computer and using an IDE / SATA to USB adapter, I attach the infected harddrive to my other system, then I run malwarebytes and avast 4.8 scan, since it is attached to ano ... Sony VAIO VGN-FS980 Notebook

Acer 5100 Laptop


As long as you can use your mouse you can try this. You system should have a setting in programs - accessories - accessibility for an on screen keyboard if you have to use it. Try this, it might be spyware causing the problem. Spyware can do almos ... Acer Aspire 5100 Notebook

Flashing off My monitor is connected to a HP Presario running Windows Vista. Five to six times a day the monitor flashes off then gives the error of "igfx has stop responding but has successfully recovered" Can anyone tell me how to stop this from happening? Thanks!


Did you check the sleep mode or power off mode? What\015\012do you do to make it come back on? Sounds like it might be getting too\015\012hot and/or going bad. Try it on another machine and see what it\015\012does. Also try another video card bec ... Gateway FPD1975W 19" LCD Monitor

Internet Explorer lock-up


Turn the system\015\012restore off. System restore keeps everything in restore. \015\012Meaning......... If you have spyware or a virus, it will stay in your\015\012system. Run Spybot S&D (This program is free and is better than u ... Compaq PC Desktops

Eratic mouse movements on two toshiba laptops Qosmio 35 with Windows media & Equium running Vista. At spoadic times the cursor will minimise a window or go to the start button without the cursor being near the location of the command carried out.


If both of these are doing the same thing, it sounds like a virus or spyware. I will give you a list of things to do. If hese things do not work let me know and I will continue helping until we get it solved.\015\012\015\012I can't fix ... Toshiba PC Desktops

Partition of hard disk


Why do you think that partitioning will increase speed? Memory is the only true way to increase speed or get a faster processor. Partitioning is for dividing up space on your drive and saving data in other places or Dual Booting. You will have to u ... Toshiba Satellite L20-S310TD Notebook

No power, front panel light is always on


Run with the 4-pin ATX power cable unplugged? No, the power supply is just supplying power to the hardware components, that do not require much power. (Wattage) [Or the power supply doesn't have enough power now, due to a bad power rail, or mor ... PC Desktops

I have Toshiba Equium laptop which is less than one yr old. For two months the Dvd Rom and usb sockets are not shown in laptop and i cant use those devices. System restore only goes back a few day and all other previous dates have disappeared. Hence cant use it. Can you help pl


Don't use system restore. Use the disk that came with it if you have it. Sounds like a virus or spyware.Hit f8 or f5 when it starts to see if you can get an install screen if you do not have a disk. You can try this below.\015\01 ... Toshiba PC Desktops

DEP Acer 3690


Sounds like spyware. Is this a VISTA operating system. The Vista O.S. ask you a question every time you hit a key it seems like. You can turn it off and that will help that problem If it is spyware you can do the following.\015\012\015\012I ... Acer Aspire 3690-2196 Notebook

Computer stays in Windows XP screen


If you can boot into SAFE MODE WITH COMMAND PROMPT then you can run a repair command from there.Here's a link to a basic guide HERE. ... HP Compaq Presario R4025US PC Notebook

Gateway gt5220 beeping noises, fan on.


What may be happening is that files are corrupt as a result of a HD failure. This is not that uncommon. It has happened to my computers causing strange beeps and often repeated clicking noise coming from the hard drive. HD failure can ... Gateway GT5220 PC Desktop

Sticky touchpad/mouse hi thanks or the suggestion. I finally got in the right menu but I didnt see any way to fix my problem. The problem is that my touchpad/mouse gets sticky and erratic --so it is impossible to navigate it sometimes. So I was looking for a way to fix this particular problem. Thanks cherry


This is a long shot but try it. It can only help. It will not hurt at all. It could be spyware messing with your settings. Stick with me on this and I will keep hwlping until we figure it out.\015\012\015\012 Turn the system restore ... PC Laptops

PROBLEMS WITH ACER 5610z


Sounds like a virus or software. Do the following. Please rate this as fixed if it helps you.\015\012\015\012Turn the system restore off. System restore keeps\015\012everything in restore. Meaning......... If you have spyware or a vir ... Acer Aspire 5610-4648 Notebook

Monitor problem the adjustment screen (contrast,brightness...etc) appearing so frequent with out my request


Check for spyware or a virus. Spyware can do anything to a computer.\015\012\015\012Turn the system restore off. System restore keeps everything\015\012in restore. Meaning......... If you have spyware or a virus, it will stay\015\012in your ... HP vs15 15"LCD Flat Panel Monitor

Abnormal shutdown, can't restart


O.k. Let's figure up some costs, then you can decide on fix or new. An operating system disc will run approx $100, you can get one at Walmart or Bestbuy. If you find that the hard drive is bad, you can figure in another $50 ... Dell Inspiron 1000 Notebook

Does telus have a free virus protection that I can scan for virus etc.


I do not know about telus or what telus is but yes there is a free Antivirus as well as spyware scanners. Spyware is worse than a virus.\015\012\015\012I\015\012can't fix this for you, but if I helped you get it fixed, please rate it as a\015\ ... PC Desktops

Hi there I have a Toshiba Satellite A210 laptop runing Vista Home Basic. The problem occured when i copied a file to a disk. When i boot up the laptop i have to run each programme. 3 of the programmes send back a stopped working message , one is the catalyst control centre and the flash card , and the other symphatic has stopped working. Now I cannot play nothing using the media player and there is no sound coming from the laptop at all. The Internal Microphone has stopped working as well. P


This sounds like it could be spyware. Try the following.........\015\012\015\012 Turn the system\015\012restore off. System restore keeps everything in restore. \015\012Meaning......... If you have spyware or a virus, it will sta ... Toshiba PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2273 seconds