Having problems with your PC Desktops ?

E-Machine want come on completely. You push power button. There is then a flash on the monitor. The Microsoft windows logo appears. A small box with 3 dots goes accross under the logo. This is the Copyright with Microsoft page. This stays for about a minute. Then you hear a click sound and the monitor turns black. Then everything keep repeat this and want completely come on!


Answers :

I would recommend that you try to start windows in safe mode and then try to do a system restore...Please clear here to get the instructions on how to start windows in safe mode...Or you can copy the the link on your web browser...
\015\012http://bertk.mvps.org/html/safemode.html
\015\012
\015\012I hope this helps
\015\012Thank You
\015\012Computerrep
Hi,

A number of possibilities:
1. the files needed to run Windows are either corrupt or missing;
2. driver error particularly with the video card;
3. virus infection;
4. hardware fault.

A temporary remedy is try to boot to Safe Mode by pressing F8 even before the Windows logo appears. On powerup, keep pressing F8 after the BIOS/CMOS display (POST).

Thereafter pls post back if Windows will boot in Safe Mode and we can work out other ways to restore Windows to normal operation.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

E-Machine want come on completely. You push power button. There is then a flash on the monitor. The Microsoft windows logo appears. A small box with 3 dots goes accross under the logo. This is the Copyright with Microsoft page. This stays for about a minute. Then you hear a click sound and the monitor turns black. Then everything keep repeat this and want completely come on!


I would recommend that you try to start windows in safe mode and then try to do a system restore...Please clear here to get the instructions on how to start window ... PC Desktops

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

Unable to restore computers original factory settings with Dells suggestion of control f11 when computer starts up


If you have already used the cd's to install the os, this will not work. there is another option which you can try.\015\012\015\012Manual Reinstallation\015\012 \015\012Manual reinstallation can be the most time consumi ... PC Desktops

Unable to print using samsung print on Windows XP


To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

My laptop has a horrible virus on it. i need to know how can i restore it to factory setting.


Hi\015\012\015\012\015\012\015\0121 How to Restore Windows Vista to Factory Settings\015\012\015\012Step 1\015\012Burn all your important files to a CD or store on a memory stick. Remember yo ... PC Laptops

Reformatting my computer


\015\012\015\012Using System Recovery CDs\015\012\015\012Change the boot order in the BIOS:- \015\012\015\012Tur ... PC Desktops

Doing siytem restore,and have no operating system.Vista home premium model no s 3460 sofware build 82APv3PrA1.Im under warranty what can i do?.In the start of system restore computer stopped,message reeds no O S.


Starting the recovery from power up\015\012If Windows Vista cannot open and if the Recovery partition on the hard disk drive is functioning properly, you can perform a System Recovery by performing the following procedure: \015\012\015\012 ... HP PC Desktops

My system did an automatic update. Now I get a message that says that my backweb-137903.exe has been moved and so my HP center does not load. I looked for the file but it is not present on my PC. I also get a message that windows installer has been moved or is not present


This error message probably occurred, because a spyware removal application incorrectly detected the Updates from HP Connections or Compaq Connections client software (developed by BackWeb Technologies), as spyware and improperly removed it. Since on ... HP PC Desktops

Windows vista wont load


Hi I believe that wouldn't be a problem. If you want to do a system recovery, the laptop usually comes with a back up partition where all the files to do system recovery is stored. You can use these files to restore the setting back to the point when ... PC Desktops

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Can't log into Win Vista Home Premium


There is a Support Doc: "You may be prompted to activate Windows Vista on a computer on which Windows Vista was already activated by a Volume License or OEM installation" at ... Gateway MT3705 Notebook

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Wont come on


First, locate the Windows CD that shipped with your PC, along with the CDs for your application software. If you downloaded your antivirus, firewall, or other programs, copy those downloads to a CD or to some other type of removable media. (If your s ... Acer Aspire X1200 Desktop PC - Athlon X2 Dual Core 2.5GHz, 4GB DDR2, 320GB, DVDRW, V ...

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Problm with viewsonic va712b


Sounds like the operating mode is at a frequency or refresh rate that is outside the viewsonic operating specifications when in normal mode. possible solution: in safe mode access control panel, system, devices (hardware) and look for display. do a r ... ViewSonic VA721 17" LCD Monitor

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

Cannot read disk - Dell Dimension 2400 PC Desktop


"A disk read error occured press Ctrl+Alt+del to restart " FOLLOW THE BELOW INSTRUCTIONS TO RUN DELL DIAGNOSTIC ON INTERNAL HDD Open the Dell Diagnostics on either your hard drive (F12) or from the Resource (Drivers and Utilities) CD. Running from th ... Dell Dimension 2400 PC Desktop

Cannot startup after updates.


Couple of things you could try. Find out exactly what model it is and look up on the internet how to do a cmos reset, on most laptops there is a small button(usually red) located somewhere on the laptop that you press or whatnot and it resets cmos b ... HP PC Laptops

Sony hmd-a400 monitor


Next time you get it running, right click my computer>properties>hardware tab>device manager and look for your monitor on the 'Monitors' '+' sign and right click>delete.\015\012\015\012Also check 'Display adapter' see if the correct driver is display ... Sony HMD A400/L (Blue, Silver) 19 in.CRT Conventional Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

I have a virus on my computer Toshiba Satellite


You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

Dell Inspiron 1526 notice problem


Lets try this....go to the start button and click on run, type in msconfig and hit enter. A box will appear, look in the main window where the three dots are, these are startup choices, I would like to pick selective startup, then go to the t ... Dell Inspiron 1526 Notebook

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Freezing - Dell Inspiron 1525 Laptop


So, you post a message like a telegram. "freezing". since you never\015\012mentioned any other details, i have no option to assume that its a dell\015\012some laptop. the solution which i am writing is universal and applies\015\012to all the laptops. ... Dell Inspiron 1525 Laptop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9787 seconds