Having problems with your PC Desktops ?

Monitor screen settings problems

\015 Hi i have a Intel 2.6 800MHz 512KB Socket 478 motherboard i have it all running on windows xp and have a dell m770 monitor the problem is my pc dosnt reconize the monitor and having problem changing my colour settings and screen settings ive downloaded a dell driver and still dont work can these board take a extra gaphics card as i have a geforce 4 card to install can you please help i look forward to hearing from you\015

Answers :

Try to see if the mainboard has an AGP slot. You can insert that Crd on the AGP slot and configure it in the bios to use the AGP port of the VGA. and install the driver for it.
\015\012
\015\012If you still use the Built in card, you can download the driver by going to the website of the mainboard, or if your computer is from dell download the correct driver for it by downloading using the service tag at the back of the computer. dell support is here:
\015\012
\015\012http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs
\015\012
\015\012
\015\012Hope this help! melnavz
You,may install that graphic card on the system
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Using Ezdock and GridVista with my Acer Ferrari 1004


Just wondering if you have loaded drivers for the F20, There may be a conflict with that monitor until you install the proper software. Another thing is to go into your display setting and make sure that the correct display device is selected. You ca ... Compaq Presario X1000 Notebook

Blank Laptop Screen


... Toshiba Satellite M45-S265 Notebook

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Heat from monitor - Computer Monitors


The monitor,screen,adapter or display of a\015\012computer is the primary user interface. Monitor problems are some of the\015\012most common computer problems since the voltages inside a monitor can be as\015\012high as 10 KV. Many of the problems ... Computer Monitors

Dell UltraScan P1110 flat-screen monitor BLURRY?


The button you pressed is the reset button and according to the documentaton "returns the monitor to factory defaults".\015\012\015\012Here's a link to the Dell support page for your monitor:\015\012\015\012 ... Computer Monitors

Monitor going black


My HP f1703 is almost 3 years old and started having this same problem. My fix got the display to stay on. Don't know how long this fix will work. I set the monitor brightness to 51 and contrast to 41. You may have to adjust to your levels to your ap ... HP Pavilion F1703 17" LCD Monitor

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

Acer aspire video hardware error


Hi,I just wanted to take a moment and acknowledge your request. It sounds to me, on first instinct, that your video encoder/decoder software components may be or probably is faulty and or just not up to date. A hardware video display adap ... Acer Aspire 5500 5570-2609 Laptop

Windows Vista does not come on the screen when I turn on my computer.


Dear Sir/Madam,\015\012\015\012 I think this is setting problem. Check the monitor setting Use “blank screen” as a screen saver option. This option will be removed. If it not clear the problem plese follow these steps to so ... PC Laptops

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

I have a Dell monitor and the text is blurry and fuzzy, how do I fix this?


This is actually from dell support website.. hope it will correct your problem...\015\012\015\012\015\0121 Ensure the correct resolution is set for the monitor. Flat panel monitors display the sharpest, clearest images when set ... Gateway FPD2275W LCD Monitor

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

Monitor distortion monitor has major distortion like wave across the screen..the hard drive is constantly running to hard seems like it has something to do with it


Hey edwardaaron,\015\012 \015\012If you are encountering any kind of visible distortion on your computer monitor, there are a couple of things that I would suggest.\015\012 \ ... PC Desktops

Screen Wiggles, CPU Shuts Self Off, Powers Up Very Slowly


#1 Sounds like a video card resolution setting problem. This can happen when the settings are too high for the monitor. What size is your monitor?\015\012\015\012#2 Sounds like hibernation. You can adjust the power settings if you right c ... Dell OptiPlex GX280 PC Desktop

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

Problem with Control Panel


It sounds like theres a front panel button that has become intermittant and making contact all by itself. Sometimes when you clean the screen, the cleaner will drip down between the crt face aqnd the cabinet and make the switch in front go bad. Im no ... SAMTRON 55V 15" CRT Monitor

I turned on my computer two days ago and the screen was so skewed on the horizontal that I was unable to view the clock on the tool bar and the start program button at the same time. I have tried to adjust this by using the horizontal and vertical buttons. Moving the screen with the vertical button is not a problem, it works. Unfortunately nothing seems to happen when I use the horizontal button. The picture remains the same. I am wondering if the monotor is on its last legs?


Most likely the refresh rate in your display settings is set to high \015\012lust right click on an empty spot on your desktop and click "properties" from the drop down menu or go to control panel / display and once you are i ... HP PC Desktops

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Same problem screen goes dark.


Hi\015\012\015\012Well I would have thought this to be a classic failing monitor until you said even a new monitor does the same thing. This being the case it can only be the video card or drivers for the card. Resolution is easy to cha ... HP Vs17 17" LCD Flat Panel Monitor

Viewsonic VA712b 17 " flat screen monitor


Realheadache, \015\012\015\012Unusual problem, it could be the resolution and refresh rate setting your PCs video card is currently set at. I don?t know if this will fix your problem but its worth a try:\015\012\015\012- Now go to your PC with the ol ... ViewSonic VA712B 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8108 seconds