Having problems with your PC Desktops ?

New larger hard drive can only be detected as Primary Slave

\015 New larger hard drive can only be detected in DOS as Primary Slave on Sony VAIO PCV-RX891. Here are the descriptions I sent, 1st to Western Digital (install manual-type answers then referred me to mfger) and 2nd to Sony (''not supported by Sony''):\015\012Western Digital:I replaced my Sony VAIO PCV-RX891 hard drive (bad Maxtor 160 GB) and cannot achieve the Primary Master setting with any of the described jumper positions (10 pin) nor will the PC boot up into Windows XP:No jumper Single (Standard Installation)1-2 Cable Select5-3 or 6-4 Single (Neutral Position)5-6 Dual (Master)The PC will boot up into Windows XP BUT sets to the Primary SLAVE setting with this last described jumper position:3-4 Dual (Slave)I also tried the Alternate Jumper Settings from the Quick Install Guide with the same results.I also tried using the Slave connector of the cable with all of the above jumper settings with the same results (i.e. could never obtain Primary Master setting). I also tried a new cable.This is a bulk drive (Amazon.com) and did not come with any documentation or software.***As a test I connected an old WD600AB with jumper setting 6-4 and the PC obtained the Primary Master setting like it is supposed to.[follow-up reply]1) I only have one drive, the new WD3200AAJB (bought it to replace a bad Maxtor 160 GB). 2) The system will only detect this drive if I jumper it as a Slave (3-4), in which case it shows it as a Primary Slave. 3) I've tried all other jumper and cable connector combinations and the system will not detect this drive as a Primary Master. New information (from BiosAgentPlus.com detection program): BIOS TYPE: Award Modular BIOS v6.0 BIOS ID: 08/20/2002-SiS651-P4S533VX BIOS DATE: 20020820 BIOS VENDOR: Award Software, Inc. BIOS VERSION: ACPI BIOS Revision 1001 BIOS SIZE: 262144 CHIPSET: SiS 651 rev 1 OEM SIGN-ON: ACPI BIOS Revision 1001 MOTHERBOARD NAME: Sony Corporation MOTHERBOARD MODEL: PCV-RX891(UC) SYSTEM NAME: Chassis Manufacture SYSTEM MODEL: US BASE MANUFACTURER: ASUSTeK Computer INC. BASE PRODUCT: P4S533VX [another follow-up reply]No, it's the only drive on the cable and I did try another cable. I also hooked this PC to an old WD600AB and it detected it properly (Primary Master). I suggest you re-read the original problem description at the very bottom.No, I do not believe the drive is faulty as I hooked it up to another PC (older) and that PC detected it properly (Primary Master). The drive formatted, installed, and booted up into Windows XP properly with the jumper set to 3-4 (Primary Slave). Windows Device Manager states ''This device is working properly'' and shows it in ''Location 1 (1).'' [I believe Location 0 is the Master and Location 1 is the Slave]. I also added all the Windows XP updates up to Service Pack 3.Sony (limited character input):I replaced a bad Maxtor 160GB HD with a new WD3200AAJB 320 GB but the system will only see as a Primary Slave will boot into XP as Slave. I tried all jumper and connector combos but will not see as Primary Master and no XP boot. Has Award BIOS v6.0 rev 1001 I also tried BIOS ESCD update from Sony. Tried another cable, WD HD on another PC,old 80 GB HD on the Sony Primary Master,all OK. How do I get the Sony to see this new HD as Pri Mst?Thank you,Floydage\015

Answers :

Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self...and yes drive's do have chip's and software in them. If nothing ells just load the OS to that drive anyway and than change the drive letters in windows.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New larger hard drive can only be detected as Primary Slave


Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

Can I add an additional internal hard drive? - HP Pavilion a350n PC Desktop


Hi,Yes, you can add additional hard drive.Please follow the below steps to add the drive sucessfully.STEP 1:Make sure you have room for an extra hard drive, here's one way to do this: 1. ... HP Pavilion a350n PC Desktop

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

Hard drive problem


Although I covered most of the ways to speed up Windows boot time in another article, I encountered a unique roadblock recently that made me write this article. During the last week I was asked by a customer to upgrade one of their office ... PC Desktops

Dell Dimension 2400 - Adding second HD


I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

I want to replace the hard drive. I have the new hard drive but I am unsure how to procede


The 13 Easy Steps to Installing a Primary Hard Drive\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012Compiled By Our Editors\015\012 Believe \015\012 it or not, all it takes is less than a ... PC Desktops

How can i format my laptop? - Acer Aspire 5600 Series 5630-6951 Laptop


Power on the computer. Press the Pause/Break key as soon as you see text on the screen. [If you currently are running in an OS of any flavor, insert XP CD and restart computer. Skip to #3 if system is configured to boot from CD.]&nb ... Acer Aspire 5600 Series 5630-6951 Laptop

No detection with external hard drive SP-U35/500


Change out ur BIOS settings about External drives.Bye ... Computer Processors

Adding old hard drive to new pc!


The seagate HHD (secondary drive) need to be on the same cable as the primary HHD. unless you haev SATA. then it is need to be connected to the second SATA connector on the mother board.\015\012go to BIOS setup and make sure the BIOS know there ... Dell Dimension 5100C (D51CL1) PC Desktop

I think i have lost my recovery partition and i don't have haveany recovery cd so how can i recover my laptop and that partition is unllocated


HI......PLEASE FOLLOW THE STEPS CAREFULLY\015\012\015\012\015\012\011\011\011\011\011\011\011\011\015\012Step 1\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011If you ... Compaq Presario C700T Notebook

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

Acer Desktop won't boot after recovery


Why not use your new hard drive as a storage disc. Reconnect your old hard drive as it was before. Hopefully it will boot the computer again. If it does, shut down the unit. On the primary bus, set your old HD as master & the new HD as slave with ... Acer Aspire™ T180 PC Desktop

Trying to copy harddrive to another harddrive. want to move to larger drive. problem is optiplex gx260 convertible desktop only shows 1 harddrive in my computer. only a c drive shows up. the secondary drive shows up in hardware listings but cannot be opened from there. I have jumpers set for master and slave. on startup, device is found, but never goes to hard disk drives under my computer. system did not come with os system disk. does anyone know how to clone to bigger drive without being sble


To clone a disc , acronis true image home is a very good software . A free software based on it is available from seagate called as disc wizard but it will only work with seagate drives. about hard drive not being detected , try upgrading your bios . ... Dell OptiPlex GX260 PC Desktop

The computer is asking for system diskette,what should i do?


Are their any disks in the CD/DVD or the floppy drives? That would cause this. It is the most common cause. Is S.M.A.R.T. turned on in the BIOS? You will see a message during the POST that says it is enabled or disabled. The POST is the " ... Acer Veriton 7100 PC Desktop

Sony laptop won't detect hard drive


Did you config as primary or slave?...jumper setting?Try entering BIOS before your Operating System begins to boots up.BIOS must recognize it before Windows ever will. ... Sony VAIO K15 Notebook

How to install second internal hard drive


Yes, you can use, Please see label attached to the harddrive for a jumper setting to become primary harddrive.\015\012\015\012in the DVD rom there's also a label on it. but the most common setting is slave is in the center.\015\012 ... Acer Aspire™ T180 PC Desktop

I need help! I'm a computer novice so please excuse my ignorance. I recently bought an Acer Aspire M1100 desktop (Acer Aspire AM1100-B1410A Refurbished AMD Desktop PC - AMD Athlon X2 4000 2 .1GHz, 2GB DDR2, 320GB SATA2, DVD±RW, Vista Home Premium). Acer told me that these are the specs for the motherboard: ACER F690GVM ATI RS690C SB600 MARVELL 88E8056. I want to upgrade my PC and want to install; AOPEN 20X DVD Rewriter IDE Interface - 20x DVD±R, 12x DVD-RAM, 8x DVD R, 6x DVD-R, 8x DVD±R


Here is what you will need to complete this project: \015\012\015\012Your new DVD burner with the included screws and cable. \015\012A phillips screwdriver. \015\012your new ha ... Acer PC Desktops

Dell dimension 2400 diskette drive 0 seek failure


Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cab ... Dell Dimension 2400 PC Desktop

Want to load Win XP on my Acer 4720z laptop - Acer Aspire 4720 Notebook


Step 1 - Start your PC and place your Windows XP CD in your CD/DVD-ROM drive. Your PC should automatically detect the CD and you will get a message saying "Press any key to boot from CD". Soon as computer starts booting from the CD.\015\ ... Acer Aspire 4720 Notebook

CD drive is not recognized


Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops

Trying to connect 3 gig sticks to my p4pe motherboard, only works with 2. also new video card runs at 512mb, in bios it only allows me to select 256 can this be adjusted through update or do i need 256 videocard. Connecting new hard drive to 3rd input on motherboard, does it have to be primary or slave. i already have prim and slave hard drives connected to first slot and prim slav dvd connected to second.


1) Make sure you look over the specs for the motherboard. If this is one of the basic P4PE motherboards, it only supports a max of 2 GB of RAM.2) For the video card you'll have to check and see if a bios update is available, and if it w ... PC Desktops

Computer wont boot properly


A POST diags card can help you resolve your problem/s, if not then.\015\0121. remove all devices and insert the floppy drive, one RAM module and video card.\015\0122. Go into the BIOS configuration and set it to the default configuration, ... PC Desktops

How to install xp in HP Pavilion dv6 1030 us Laptop and how to repartition my C: drive especially I have still 150 GB free space in C drive Please help me in this case Thanks in advance.


Partition and format the hard disk using the Windows XP Setup program\015\012\015\012 loadTOCNode(2, 'moreinformation');\015\012 You can use the Windows XP Setup program to partition and format the hard disk. To do this, use ... HP Pavilion dv6-1030us Notebook

Concerning a thinkcentre ibm 8183 pentium 3: I put in a blank new hard drive and am wanting to instal a new os from the dvd drive...using f1 to get to different boot options..i choose boot from dvd drive (which has the os disk in it. this choice never works, the machine continues try an boot from the blank hard drive and says... error no os found. I can get the machine to boot from the dvd drive after asking it to using F1. why wont maching follow the choice it is offering me?


Propably u have maked the new hard disque in slave position then u got two slaves and they don't work.try to detect all your drives 2 HDD and DVD by the auto detect utiliti in bios then they must works.ah don't forget in iche nape ther r 1master and ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7563 seconds