Having problems with your PC Desktops ?

Pulled out supply out of my emachine EL1600...I want to UPGRADE...don't want the same garbage. Do you know of a supply that will fit?


Answers :

The emachines EL1600 is an ATX form factor to my knowledge. Just goto the store and get an ATX form factor power supply any brand and you should be fine. A 350watt or so should do you unless you're using a higher end video card.

Theres no brand requirements unless you're using a MAC.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pulled out supply out of my emachine EL1600...I want to UPGRADE...don't want the same garbage. Do you know of a supply that will fit?


The emachines EL1600 is an ATX form factor to my knowledge. Just goto the store and get an ATX form factor power supply any brand and you should be fine. A 350watt or so should do you unless you're using a higher end video card.Theres n ... PC Desktops

Westinghouse lcm 19v5 won't power on period


I have a Westinghouse LCM-20v5 that would have problems powering on, and then it would power on for about 1/8 sec and lose the picture. It died 1 year and a few months after purchase. That sucks. LCD screen problems are often caused by the interna ... Westinghouse LCM-19v5 Monitor

Compac Evo D300v and Emachine W3650-usb do not detect devices


\015\012One or more of the hints below will probably sort out most USB problems with most USB portable / external hard drives and OTHER devices (though not always)A few things to check but assumes USB and Windows for other interface ... PC Desktops

Emachine will not power up


By nothing else, from a technical standpoint this would mean literally nothing, the CPU fan, power supply fan, aux fan, disk drive not spinning up, etc. My experience with EMachines is their motherboards aint the best, have been known to take out har ... E-Machines eMachines Desktop PC

Need new power supply but having problems finding one.


Power supplies are available many places on the internet, especially on ebay. Try this search on ebay: power +supply +ATX +400W. This is for a 400 watt supply which should be sufficient. ... Balance CP4401 PC Desktop

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

Upgrading my Acer Aspire M1641 Desktop graphics card


The motherboard will support any PCI Express x16 or PCI Express 2.0 x16 video cards. Your main concern should be with the power supply since it is either a 300w or 250w. \015\012\015\012Here is a pretty good choice for your price range ... Acer Aspire M1641-U1521A PC Desktop

I want to get a new mother board and cpu for this model acer aspire e380 just wanted to know if i get those parts will it fit into this system


As long as the motherboard is an ATX or mATX form-factor, it should fit without a problem. Just remember that it has a 300W power supply, so you need to watch the power consumption of all of the devices you have in there. You don't want to exceed t ... Acer Aspire E380-UD420A (ASE380-UD420A) PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

The acomdata drive is not responding. The light comes when powered on, but my computer cannot find the drive, nor does the drive behave as thought it's processing.


I devised these simple steps that tend to remedy quite a few issues with most portable / external hard drives (though not always)\015\012\015\012A few things to check but assumes USB and Windows for other interfaces / operating systems si ... PC Desktops

I don't really have a problem I just want to upgrade the cpu but don't have a support list. I want to put in the best possible one but don't know which one it will support.


Here are the tips on how to upgrade and support to you CPU.The 8400GS isn't much better than the onboard graphics in your Emachines, and the 7200 is NO better than your onboard.\015\012\015\012If you want a noticeable improvem ... eMachines W3507 PC Desktop

When i turn on my emachines 420 at the mains, the led power light comes on, but it wont do anything else including turning on or off


Hello there,this sounds like a problem with your power supply unit inside the computer,emachines are always blowing there power supply because the one that comes with the computer just is not powerful enough.If you are confident enough around electri ... E-Machines eMachines Desktop PC

Emachine t5230 cpu fan too fast


Hi orinzelenak,\015\012\015\012This may seem like to simple, but try checking to see if the technician plugged the fan power supply into the correct pin for it. It sounds like the fan is plugged into a external plug directly from the pow ... E-Machines T2682 (000002965) PC Desktop

Emachine t2984 - need to diagram to install power & hard drive


There is 2 main cables you have to worry about to feed power to the system. One looks like a big rectangle block with a mess of wires attached. Make sure he is hooked into the system. Then if its an newer unit you will find a plug that has square loo ... E-Machines eMachines Desktop PC

EMachine Model T3828 No power


Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

I have an emachine that is 5 years old. Always


YOUR PSU (POWER SUPPLY UNIT) MAYBE THE CULPRIT. If the power to your cable which fits the computer is ok, then the supply unit is usually at fault. You can buy these pretty cheaply on ebay and they are very easy to fit, or if you are not into that fi ... E-Machines eMachines Desktop PC

Emachine t2642 power supply - PC Desktops


Apparently this model has a bad motherboard, which manifests as a power warning and eventually a refusal to boot up. You can replace the power supply (as far as I know, any generic one 250-watt or better will work) but it's unlikely to help. You can ... PC Desktops

On working on my mother's emachine W3410. Her


Test the ram and the cpu, if its not one of those, then it IS the motherboard. ... E-Machines W3410 PC Desktop

I have a Samsung Syncmaster 932b LCD monitor. When I turn it on, the screen just flashes on and off, as does the blue light around the power button. I read up online and found that the capacitors on the power supply were bad, so I opened the monitor and found the power supply motherboard and I found 3 of the capacitors were bulging. I am looking to replace them, but I can't seem to find out exactly what kind of capacitors they are. The capacitors themselves have the following written on them,


Savato321, Most black screen lcd monitor owners don't have the smarts to open up their monitors to do a VISUAL inspection of the "switch-mode-power-supply/inverter supply!!!! You're good. Now you will need to know some stuff about electrolytic filter ... Samsung SyncMaster 932B LCD Monitor

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

Tried new power supply but didn't help. (Who knows - maybe I didn't install correctly.) I first thought it was the power switch on front of machine. Was wondering if some easy test for power switch?


Tips from me:1.If your power supply isn't coming on, I advise you to check the 20/24-pin motherboard power cable, connector, and be sure it's down in tight. Make sure that lock tab of the power cable connector, snaps over the mother ... E-Machines eMachines Desktop PC

When i plug things into my usb ports the computer either doesn't register them or it says that it doesn't know what is being plugged in


I devised these simple steps that tend to remedy quite a few issues with most USB portable / external hard drives and devices (though not always)\015\012\015\012A few things to check but assumes USB and Windows for other interfaces / ope ... Dell Latitude D820 Notebook

Flickering screen with a claping sound...


From other posts here the repair kit appears to be just the 3 caps and instructions to unsolder the 3 blown caps and replace ( solder back in) the 3 new caps. Once you get the back off the monitor and start taking it apart you will see 3 capac ... Princeton Digital VL1918 Monitor

No display flashing power button - Samsung SyncMaster 932B LCD Monitor


Savato321, Most black screen lcd monitor owners don't have the smarts\015\012to open up their monitors to do a VISUAL inspection of the\015\012"switch-mode-power-supply/inverter supply!!!! You're good. Now you will\015\012need to know some stuff abou ... Samsung SyncMaster 932B LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0342 seconds