Having problems with your PC Desktops ?

Computer powers on, but does not boot on an emachines t3624. replaced the power supply


Answers :

If the fans come on and BIOS does not post (initial screen upon power up), you likely have a mainboard or CPU issue. If a chip fan failed, or your box overheated, your CPU could be fried. Or possibly something on your motherboard got taken out due to lightning, a faulty power supply, etc. If this is the case, you're in bad shape as you're probably dead in the water and need a new MB/CPU.
\015\012
\015\012If you are hearing any beeps upon power up, another hardware device such as memory or a video card (even a defective drive) could be the culprit. If you can try swapping out components to find the one that's causing the failure, and replace that component.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Computer powers on, but does not boot on an emachines t3624. replaced the power supply


If the fans come on and BIOS does not post (initial screen upon power up), you likely have a mainboard or CPU issue. If a chip fan failed, or your box overheated, your CPU could be fried. Or possibly something on your motherboard got taken out due to ... PC Desktops

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

IBM ThinkCentre 8183 (M51) does not boot


The situation you describe is usually 1 of 2 things, Power supply (PSU) or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... IBM ThinkCentre M51 PC Desktop

EMachine T3406 wont boot


Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC

Replaced power supply on T2240 emachine now cant get onboard video" or any video,also tried PCI video card with no results. Need video to see if machine can boot


Unplug the computer for at least one minute. Press power button for 4 secondS while the power cord is unplug. Plug it back listen for beeps short and long beeps count them and refer to bios codes. If nothing happens remove everything from the mothe ... Intel PC Desktops

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

Emachine T3624 will not power up


Emachines are notorious for having faulty power supplies. If your lucky you just need to replace the power supply. I've seen a lot of them where the power supply also fried the motherboard.\015\012 \ ... E-Machines T2984 PC Desktop

Emachine T2484 will not power up


Try to start it without any memory in it (RAM), if it beeps then you have bad RAM. If you have more than 1 piece of RAM then try one at a time and see if it will boot. If it doesn't beep and still doesn't turn on your CPU is probably the culprit si ... E-Machines eMachines Desktop PC

E-Machine T6216 PSU fan runs, computer will not boot


It is the power supply. EMachines have a long history of using cheap power supplies. I have replaced over a dozen EMachine power supplies with a 100% success rate. They are easy to replace and can be had for less than $20. Just write down the model n ... E-Machines eMachines Desktop PC

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

Emachine power supply


Unfortunately, E-Machines are well known for their power supply problems. I have a room full of them.Let me guess, you can hear something rattling around in the power supply, right?When this happens, a component blows cleanly ... E-Machines eMachines Desktop PC

Emachine T3624 has no power at all


Sounds like the power supply may have gone. try replacing it. or using a old PSU lying about ... E-Machines eMachines Desktop PC

T2893 desktop did not power on when I hit the power button


If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

Replaced dead power supply computer still dead


Hi\015\012most power supplys are protected against faults when they are connected to damaged equipment\015\012so it possibly just protecting its self\015\012\015\012disconnect everything from the PSU except your MB\015\0 ... E-Machines D2046 PC Desktop

Emachine t2642 power supply - PC Desktops


Apparently this model has a bad motherboard, which manifests as a power warning and eventually a refusal to boot up. You can replace the power supply (as far as I know, any generic one 250-watt or better will work) but it's unlikely to help. You can ... PC Desktops

Computer will not boot up


Sounds like the bios is not posting. Your motherboard could be damaged.Try this though. Recheck that your keyboard and mouse are plugged into the right holes on the back, sometimes having these switched will not let the computer boot. ... E-Machines T5082 PC Desktop

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

EMachine tower doesn't boot up. Only the fan is running


Check your power supply. Open it up and you will see that a capacitor has blown in the power supply box. Once you know for sure this is the problem, you can resolder a new one in or replace the whole power supply or bring it to a rapair shop. Good lu ... E-Machines eMachines Desktop PC

I have the emachine t1100, huge desktop monitor worked fine until I installed a new video card,, the ATI Radeo 7500 64MB PCI. Computer does not boot up but fan goes on. I also disconnectd the card to go back to original configuration, and now I still don't have a monitor or boot-up. I recently installed 2 new SDRAm 256 cards, sound card & dvd drive all at the same time. I can't intall any of the drivers due t6o not being able to see the monitor or access the operating system. It would be gre


Try taking out all the newly installed components and see if this restores operation to your computer and monitor. You may have overloaded your system and either the power supply failed you or the motherboard.You might not have damaged anything yet, ... E-Machines eMachines Desktop PC

Power pack fan not booting but there is power on motherboard


Do you mean the power supply fan or the processor fan? \015\012Of the assemblies in a desktop, the power supply is the least reliable and the internal fan the most unreliable part.\015\012Since a failed fan can allow other parts of the supply ... E-Machines eMachines Desktop PC

Gateway 831gm not booting. Fans come on but no boot process.


2 questions:\015\012When you say new motherboard do you mean an actual new motherboard or new to that machine, but came from another used model?\015\012When you say you tested the power supply do you mean with a voltmeter/ammeter or put i ... Gateway 831GM PC Desktop

G620 boot problem


When you power up press F8 key then ente rin enable vga mdoe.Then go to contro lpanel and then open dispaly property then change screen resolution to 1024*768 then apply and ok.Then restart it. ... PC Laptops

Emachine t3418 no video pwr sply goes and that's it no boot


If you have a desktop system and it is in a no power state, I'd replace the power supply (Or if available test with a known good) before I'd replace teh motherboard, Power supplies normally fail 1st ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7958 seconds