Having problems with your PC Desktops ?

LiteOn LH18A1P DVD RAM problem. Has worked OK in the past but recently stopped working properly. Will not read any CD or DVD with data on it. light comes on and spins up but then hangs PC. reads if disc is left in drive and PC powered up. However appears to recognise blank CD or DVD and will write to it? Have replaced IDE ribbon cable and set it as the master drive (as it was) and also slave drive. Also tried another drive in its place (LG DVD writer) which did exactly the same thing. reloaded m


Answers :

Two thing to do reformat if not success replace motherboard
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

Pioneer dvr115d i purchased the above fitted to my pc computer recognises it but when i put a dvdr in it still says put disc into drive. just wondering if i put cables in proper its set to slave as was my original dvd re writer be most grateful if any one can solve this problem


Now a days you cant really put the cables in wrong becasue they only fit a certain way. but be sure its plugged into the IDE 2 slot on the board and isnt connected on the same ribbon as the HDD. Now it may be a frimware issue, check the website for u ... PC Desktops

Trying to add another internal hard drive to Dell Dimension 3000


Leave the cable connection as it is. That is, one ribbon cable for the 2 dvd drives and the original cable for the old hard drive. You dont need to set the jumper on the second hdd. It has to be set to 'cable select'. Then make sure to connect the se ... Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

I was installing a dvd drive, unhooked main power supply in computer, now when I turn on computer it says it needs a systems reboot disc can you help


The computer can't see the hard drive. IF the hard drive is on the same IDE ribbon as the DVD then you have a jumper problem. You need to look at the old cdrom if there was one and jumper new one the same as old one. (Master, slave or cable select) ... PC Desktops

LiteOn LH18A1P DVD RAM problem. Has worked OK in the past but recently stopped working properly. Will not read any CD or DVD with data on it. light comes on and spins up but then hangs PC. reads if disc is left in drive and PC powered up. However appears to recognise blank CD or DVD and will write to it? Have replaced IDE ribbon cable and set it as the master drive (as it was) and also slave drive. Also tried another drive in its place (LG DVD writer) which did exactly the same thing. reloaded m


Two thing to do reformat if not success replace motherboard ... PC Desktops

Cannot get 2 IDE devices to show in bios.


Does the computer have two IDE channels? If so set the Maxtor HDD as master on the primary channel and the DVD drive as master on the secondary channel. Also right click on My Computer, left click on Manage and left click on Disk Management and see i ... Dell OptiPlex GX280 PC Desktop

I need help! I'm a computer novice so please excuse my ignorance. I recently bought an Acer Aspire M1100 desktop (Acer Aspire AM1100-B1410A Refurbished AMD Desktop PC - AMD Athlon X2 4000 2 .1GHz, 2GB DDR2, 320GB SATA2, DVD±RW, Vista Home Premium). Acer told me that these are the specs for the motherboard: ACER F690GVM ATI RS690C SB600 MARVELL 88E8056. I want to upgrade my PC and want to install; AOPEN 20X DVD Rewriter IDE Interface - 20x DVD±R, 12x DVD-RAM, 8x DVD R, 6x DVD-R, 8x DVD±R


Here is what you will need to complete this project: \015\012\015\012Your new DVD burner with the included screws and cable. \015\012A phillips screwdriver. \015\012your new ha ... Acer PC Desktops

How to install a second dvd player in my compaq


The computer needs to be opened up to properly install the CD or DVD drive into the computer. The method for opening the case will vary depending upon the case. Most new systems will use a panel or door on the side of the system while older systems m ... Compaq PC Desktops

Slow burning - PC Desktops


Ok, please elaborate your situation what dvd model do u have u can check this my going to my computer right clicking on your dvd drive and then properties and going to the harware tab and it will tell uon away to fix this would be to go ... PC Desktops

Sata as boot and install eide drive as d:or e:


You can slave the EIDE hard drive off of the CD Drive, as long has it is also EIDE. There should be a flat grey ribbon cable plugged into the back of your CD Drive. That IDE ribbon cable should have 2 connectors on it, one of them should be plugged ... PC Desktops

Dvd rom won't work


You forgot to check the jumper settings of the Hard Disk and the DVD Drive found at the back near the IDE and power cables. If you are using one IDE cable, then one jumper should be a Master, that's the Harddisk, and the DVD drive a Slave. If you are ... Compaq Presario 5000 PC Desktop

My hard drive is not being noticed - E-Machines eMachines Desktop PC


You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper s ... E-Machines eMachines Desktop PC

IDE Drive not found on startup


I am assuming that the cd and DVD drives are on the Ide right ?? thats because one of the drives jumper is set wrong. If you take a look at the back you will find it saying master / slave / Cable select with eighter a 6 to 10 pins. basically one need ... Dell Dimension E310 PC Desktop

Won't reconize DVD burner


Well, the CD ribon cable goes into the IDE 2 slot on the Mainboard and the furthest connector on the other end is the master, the second one closest to the board is the Slave connector. The CD drive has a jumper on the back between where the ribbon ... HP Compaq dc7100 PC Desktop

CD drive is not recognized


Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops

My computer will not read any of my disk or install


When you say disk did you mean hard disk? if you do... did you recenlty install a new hard disks?... if you did... did you check the jumper-master-slave configuration when installing the new hard disk? \015\012only one hard disk can be configur ... HP PC Desktops

Code 39 i av a acer aspire 7720 my pioneer dvd-rw k17rs ata as stopped work and gives code 39. help


.Turn on the PC. When the HP/Compaq logo screen appears, press the F1 key repeatedly until the BIOS Setup screen appears (on some models this key press may different, F2 or Del) 2.Use the Left and Right Arrow keys to select Main. 3.The ha ... PC Laptops

Dell Dimension 2400 - Adding second HD


I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

How many hard frives can be installed


You can put as many drives as you can fit as long as you have the cables and connection. Usually 4 is the max in a computer, but you can by a SCSI IDE card and add even more. The biggest problem is to make sure that the jumpers are set to slave on ... Dell Dimension 4600 PC Desktop

How to install second internal hard drive


Yes, you can use, Please see label attached to the harddrive for a jumper setting to become primary harddrive.\015\012\015\012in the DVD rom there's also a label on it. but the most common setting is slave is in the center.\015\012 ... Acer Aspire™ T180 PC Desktop

2nd internal hard drive


\015\012I’m assuming that you have an IDE hard disk drive ribbon cable with 2 connectors on it. One connector is for the primary or master drive. The other is for a secondary or slave drive. Return all jumper ... Dell Dimension 3000 PC Desktop

Not reading disc.cd/dvds - Lite On PC Desktops


Solution 1.-----------Firstly lets see if your drive is working!Put in a disk you know works and has files of some sort on itIf nothing is still happening , goto my computer and right click on your CD drive and ... Lite On PC Desktops

I want to replace the hard drive. I have the new hard drive but I am unsure how to procede


The 13 Easy Steps to Installing a Primary Hard Drive\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012Compiled By Our Editors\015\012 Believe \015\012 it or not, all it takes is less than a ... PC Desktops

Installing a new DVD drive - Acer PC Desktops


Step1::Ground yourself by first touching a metal object or wearing an anti-static wrist strap. This helps protect your computer's internal \015\012components from damage due to static. \015\012Step2::Shut down your computer and unplug it ... Acer PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9379 seconds