Having problems with your PC Desktops ?

Computer wont boot properly

\015 I'm trying to get an old computer to work but it wont boot up. This is the error I get...RPL-ROM-ADR: 000A E6C6 6A79RPL-ROM-IRQ: 12RPL-ROM-PIO: D400RPL-ROM-FFC: 1I tried to do a full installation using Windows XP, but as soon as I enter Setup, I get a Blue Screen of Death (BSOD). I checked the BIOS and my Primary Boot device is set to Floppy, Secondary as CD, and Tertiary as Hard Drive.Currently I have removed the battery from the motherboard, as this may solve the issue but if anyone knows the fix to this problem Please guide me. Thanks\015

Answers :

A POST diags card can help you resolve your problem/s, if not then.
\015\0121. remove all devices and insert the floppy drive, one RAM module and video card.
\015\0122. Go into the BIOS configuration and set it to the default configuration, check the installed RAM is it correct? .
\015\0123. Insert the remainder RAM module/s and check the POST info and BIOS again, has it detected all the RAM?
\015\0124. Does the computer Boot up using a floppy boot disk
\015\0125. Insert the CD and hard disk and check the POST info and BIOS configuration, does it detect the new drives?
\015\0126. Does the computer Boot up using a floppy boot disk, run FDISK, can you see the hard drive, if so delete all partitions (if any) and create a new primary DOS partition and then format the hard drive.
\015\0127. Boot up with the Windows CD (may have to change the boot order to the CD as the first boot device).
\015\0128. Delete the DOS partition, create a primary NTFS partition and the do a full NTFS format (not a quick format) and continue to install Windows Xp or Vista.
\015\0129. Install the other device eg modem, Lan etc. and the drivers.
\015\012If you have trouble with the first 5 steps, then you most likely have a faulty motherboard and/or a faulty hard disk.
Firstly, check if Floppy drive physically installedin that PC, if not, then remove it from BIOS also. Second, check the Master/Slave jumper configuration on the HDD and CD drives. If they are connected each by own flat cables, they both shall be MA, otherwise, if they both sitting on same cable, make HDD - MA and CD - SL. Make sure they appears in the BIOS same. It also possible your HDD has physical damages on the disc. In the BIOS settings enable SMART function and when booting, keep finger on PAUSE/BREAK button, stop boot process when table shows up, there you will find SMART function report about HDD condition.
Also when you install fresh Windows XP, select New Installation with deletion of previous copy, and FULL FORMAT of HDD (not Quick Format) - this will isolate HDD errors if any.
In case if that HDD may have valuable info, connect another hard drive as master and keed old one as slave.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi pc wont start

This error can be caused by one or more of the below possibilities.\015\012Floppy or CD that is not bootable is cur... BIOS or CMOS setup is not setup properly... Hard disk drive does not have bootable f... The hard disk drive ... HP Compaq Presario V2000 Notebook

My compaq desktop computer wont start up it keeps saying NTLDR missing

Hi i have made lil resaerch for this problem so every user who suffurs from this problem can Fixt it on Fixya.com i wish this well helps everyone when u finish rate me plz cuz that was a day and half reasaerch took me a serious hard time but t(his i ... Compaq PC Desktops

Acer 3690 I have a message ntldr is missing press any key....it wont start

Could be various causes just follow the information below and you should solve it.Good luckNTLDR is MissingPress any key to restart\015\012\011\011\011Boot: Couldn't find NTLDRPlease insert another disk\015\0 ... Acer Aspire 3690-2196 Notebook

Dell xps m1530 formatted hdd now it wont boot

You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

Computer wont boot properly

A POST diags card can help you resolve your problem/s, if not then.\015\0121. remove all devices and insert the floppy drive, one RAM module and video card.\015\0122. Go into the BIOS configuration and set it to the default configuration, ... PC Desktops

Wont recognise disk drive ide error

What you need to do is edit the BIOS so that the computer boots from the CD-ROM initially rather then the harddrive. To do this follow these instructions:1. Start the computer and tap the F2 key2. You will now be in the comput ... PC Desktops

Laptop wont boot from cd/dvd drive, hard drive is cleasn, no viru

\015\012Change the BIOS boot order so the CD or DVD drive is listed first. Some computers are \015\012already config ... Toshiba Satellite A105 Notebook

Acer aspire laptop wont boot

The problem is normally with the motherboard. Laptops get very hot when running for long periods of time and the chips on the motherboard start to break down. This is a known problem with these Laptops. You can purchase a new motherboard on Ebay for ... Acer Aspire 5100-5033 Notebook

Cannot run application (*.exe)

Often this error message will be similar to the below error message.\015\012C:Program Filesmyprogramprogram.exe is not a valid Win32 application.\015\012Cause:\015\012This issue can be caused by any of the below possibilities.\015\0 ... Dell Inspiron 1420 Notebook

Massive series of problems with IBM Thinkpad

Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Replaced hard drive now computer wont boot

If you have a restore CD/DVD that came with your Toshiba, you may have to use it to reformat your hard drive and do a fresh installation. You may have a bad sector or cluster and the boot file is located on it. Try this and check the bios for the set ... Toshiba Satellite® A135-S4467 PC Notebook

Have ide drive have put a new 60gig but cant load new os it finds the cd drive but wont boot from disk have changed bios but still it say ntdlr missing it drivin me nutts.

\015\012Computer is booting from a non-bootable source.\015\012Computer hard disk drive is not properly setup in BIOS.\015\012Corrupt NTLDR and/or NTDETECT.COM file.\015\012 ... Fujitsu Siemens LifeBook S-6000 Notebook

Wont boot up to bios

I have had TWO recent model NEC laptops with the same symptom in the past 5 months. I was quite surprised, since NEC is a quality product. But the problem was the DVD/CD-Rom, which is made by Philips (mine were Philips SCB5265 models, but there are o ... NEC Versa SX Notebook

Computer turns on, wont load windows, then goes to a blank screen

When a PC boots first it checks all of the hardware to ensure all is working properly. The stage two of that is turning it over to the operating system. When it is turned over to the operating system the first thing it looks for is the Master Boot Re ... Acer Aspire 5315 Notebook

Computer wont boot - PC Desktops

Dell are brilliant! I eventually found out that dell include a recovery mode in their initial build/set up. This was in microsoft technical articles. Soon after turning the power on press ctrl and f11. This then activates the dell recovery mode e ... PC Desktops

PC wont boot

Make bios clear \015\012you have a jumper in your mainboard that do that. \015\012second make sure you are using the same speed of the ram and that speed do not surpass your computer capability speed. you told that you proved ram in anoth ... HP Pavilion m7640n PC Desktop

Computer wont boot, installed hardware for my mobile phone it seemed to work but the next day i got a message saying computer shutting down due to hardware not installed properly. whenever i switched the computer on i get the packard bell screen saying press esc to switch screen, i have options to boot or go into bios however it will only keep trying to boot and it fails. i do not have any boot cd's, if possible is there a way to restore the computer to factory settings? or a way to get past thi

Well good to see that your problem is solved now, if you can rate me helpful to, I will appreciated that. For any help in future you can click on Ask me button under the name, we will glad to help you out. ... Packard Bell PC Desktops

Compaq presario sr1950nx monitor wont turn on the usual green indicating its on is now orange...tried to inspect the video cable and video connectors for damage its seems fine.....the hard drive is working but the fan seems a little loud.

It sounds to me like the computer is coming on but not booting. That is, there's power but it isn't actually starting up, so no video ever gets to the monitor. Until there is a video signal from the computer (you're calling it the hard drive), the po ... Compaq Computer Monitors

My computer is blinking but wont start up. I moved the computer to a new location. plugged everything back in and it just blinks instead of booting up.

There are many possible causes of this issue and this is mostly causes by Hardware not being properly seated on the computer. Try to power cycle the computer first remove all the cable connected at the back of the computer and press the power button ... Compaq Presario 5000 PC Desktop

Moniter wont work

Possible reasons for this is a defective video card or the monitor\015\012itself or Windows installation failure. First, isolate the problem by swapping a working monitor to\015\012your system and check if the problem still persists. If it still\01 ... HP Pavilion MX70 17" CRT Monitor

Wont boot up, stays on black screen with flashing "_" sign

The OS probably has a corrupt system file that is causing it not to turn on properly. If you can get into safe mode, back up all of the files that you need either online or via a flash disk or blank CD/DVD. Make a list of the software you have that i ... Acer Aspire 5100 Notebook

This Acer AST 160 I'm working on crashed...

Computer stops at verifying dmi pool data.\015\012Issue:\015\012Computer stops at verifying dmi pool data.\015\012Cause:\015\012This issue can be caused by any of the below reasons.\015\012\015\012Corrupt boot files o ... Acer Aspire T160 (AST160UA3400) PC Desktop

Yea sorry, forgot that tid-bit of info. It,s the W3118 eMachine / Gateway FIC K8MC51G

This issue can be caused by any of the below reasons.-Corrupt boot files on the computer.-Settings for hard disk drive are not correct.-Floppy diskette or CD in computer causing issue.-Boot devices not set properl ... E-Machines eMachines Desktop PC

Pc wont read monitor

If you look at the monitor there will be an led light on the front that is always orange or yellow when the computer is off but still connected to the monitor. This led will turn green when the computer boots up, sometimes even showing a "no signal" ... HP PAVILION A6230N DESKTOP PC

My computer wont boot properly - PC Desktops

Try to check first if your hard drive is working. Just follow the steps.\015\012\015\012\015\012Load BIOS Utility by pressing any of the following keys upon booting or as soon as you have turn on your computer. (keys ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6858 seconds