Having problems with your PC Desktops ?

Does my sandisk adapter to make it work in lock or unlock position


Answers :

In Lock position you can read but not write to it.
\015\012In Unlock position you can read and write.
You can still read the drive in either position but if you want to change the files inside the device slider has to be on the unlock position...otherwise it is in lock and you are unable to change or modify the files.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does my sandisk adapter to make it work in lock or unlock position


In Lock position you can read but not write to it.\015\012In Unlock position you can read and write. ... PC Desktops

Computer compaq nc 6000 power off during working


Hi, If you feel the power adapter working fine with the diff unit its not an issue with the adapter,Now, if the unit is not powering on.just perform this:Take out the batter, adapter and make the unit stand alone a ... HP Compaq nc6000 Notebook

I want to buy a computer at a pawn shop but the bios password is locked. is it easy to unlock?


Hi,Whether the BIOS is easy to unlock depends on your abilities. If you are fairly technologically competent, it should not be a problem for you. If you receive a password at boot that you do not know, you will need to clear t ... Acer PC Desktops

I was unable to power up my 8250 and I have oirdered a new power supply. Is this difficult to install and is there a set process to follow?


Not difficult at all.1) Work on a table. Computer unplugged from power, computer case open. TOUCH the metal frame of the computer case. (Not shouting)[Your body carries Static electricity. Static will fry out the hardware comp ... Dell Dimension 8250 PC Desktop

My mouse button is lock how do i unlock it - PC Laptops


1. The touchpad and external mouse drivers should be able to work together. Just make sure that you have the touchpad enabled. To see if you have the touchpad enabled, hold the Fn key and press F9. The combination Fn-F9 locks and unlocks the touchpad ... PC Laptops

How do you unlock the mouse touch pad? - HP Compaq nc6000 Notebook


1. The touchpad and external mouse drivers should be able to work together. Just make sure that you have the touchpad enabled. To see if you have the touchpad enabled, hold the Fn key and press F9. The combination Fn-F9 locks and unlocks the touchpad ... HP Compaq nc6000 Notebook

The button on the front has functions but when I press either the left hand side or the right hand side it just comes up with a message ''OSD Locked'' What does this mean


OSD Locked means that your On Screen Display is locked. That basically means you can't access/change the menu settings. The way to unlock the OSD varies from manufacturer to manufacturer and even monitor to monitor. Here are a couple different ways t ... Computer Monitors

Acer aspire L100


Well this is hard to explain........the ribbon slips into a socket on the board pluged into the dvd drive. the board is held on by 2 screws. the way the ribbon plugs into the board is really shaky and it disconnects really easy with the slightest pul ... Acer Aspire L100 PC Desktop

What is a better software for omnia? spb...s2U2...or touch flo 2d OR CAN YOU INSTALL THEM ALL TOGETHER?


2 of the things you mention SPB and TouchFlo 2d are user interfaces.i have used both in the past and each has its positive and negative points.SPB mobile shell gives the benefit of making your Omnia much more finger friendly. when i had t ... HP OmniBook XE3 Notebook

Computer ranbdomly shuts down


Your last question was very observant. NO, without an O/S, there is nothing to make a anti-virus program run.I suggest the problem in the beginning, was that the laptop was overheating. Once the processor becomes too hot, (Processors have ... HP Pavilion dv4015CL PC Notebook

Is there a battery that powers the desk top clock. If so I need to know how to replace it.


The battery that powers the desktop clock is a CR2032 for your E-Machines desktop computer. It's a type of watch battery, and is carried in many stores, not just computer related stores.(About $2)BEFORE you put your hands inside the ... E-Machines eMachines Desktop PC

Repositioning the screen makes the computer cut out. it seems to only work when the screen is tilted far back.


I agree with thgrtalex. I also think the Display Cable connector may have come loose.I will go further, and state that I think the flat 'ribbon' cable, (Display Cable), may have come loose in it's ZIF socket.The Di ... Compaq Presario 1700 Notebook

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

I have a dell 4600 that I got from my daughter . which I had to re-install and It has a password in the bios for the set up and my daughter dont know


\015\012 \015\012Hi katmbutts;\015\012 \015\012 \015\012Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware ... Dell Dimension 4600 PC Desktop

Dell Inspiron 1525 Locked Out, Links or Info Help


I have a dell computer optiplex 745 and on my computer there is a password reset on the mother board it may be a switch you have to change and then power up the system or there may be a little clip that you have to move to another position and then p ... Dell Inspiron 1525 Laptop

My computer comes on but my screen is blank - Gateway PC Desktops


Hi tytiyana..i am giving my sugggestions.Remedies. The remedies below should be performed \015\012\015\012 in order. NOTE:Turn off the computer after each step. Never work inside the \015\012\015\012 compute ... Gateway PC Desktops

Monitor screen display in stretched out and not proper


Tell me the monitor model and year of make...\015\012if the screen displayed in different sizes and shape when u on it and change mode while in on position after few minutes then this is problem in the Horizontal-vertical section of yoke coil. ... Computer Monitors

I own a Gateway laptop computer and the power button was accidentally mashed in by my daughter over the weekend.....After trying to mess with it and trying to push it back up to a normal position, the button completely broke off and fell into the hole where it's supposed to be located. I managed to get it out of there, but now my computer will not turn on at all.....Before it broke completely off and although it was all wigley inside, I could push the button and the computer would power up, but


What mdel is it? Gateway is notorious for problems with their power buttons even after they fix them their selves. Firstly, if it's under warranty or extended warranty through another provider definitely have it repaired. To get it to power up you ca ... PC Desktops

I dont remember the supervisor password now Im locked out of the bios on my laptop and it sucks.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... Toshiba Satellite A305D-S6835 Notebook

Friend gave me an hp pavillion zv5000 that they couldnt get to work. it needs the power on password and they dont have it. i am a pc tech so i have no problem with doing any kind of laptop surgery. would appreciate any help as this is driving me crazy! you can email me direct at:


Method 1 : Removing the CMOS BatteryThe CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the ... HP Pavilion zv5000 Notebook

Intel D845GLAD motherboard


This is indeed listed as a Memory error by Intel\015\012\015\0123 beeps = Base 64K memory failure\015\012\015\012the name of that probably doesn't say much to the average PC user, but for those of us who remember the good ole ... PC Desktops

Can't make processor Northwood P4 3ghz 512kb 800 work higher then 2ghz on MSI 845PE Max-L and when i wantt to overclock it in bios it says that the fsb is locked how do i unlock it? I tried Fuzzy Logic 4 from MSI but didn't get anything done everything stays the same after Fuzzy's work so how can I make it work at 3 ghz?


That core is the same as min i have 2.4 and cant got it to 2.6 so yours might not be able to aswell ... PC Desktops

Can't change enter BIOS on Ubisurfer... help?


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... HEWLETT-PACKARD HEWLETT PACKARD PCDO FV879AWABA: HP EliteBook 2530p - Core 2 Duo SL9400 / 1.86 GHz... PC Notebook

Cd/dvd drive does not open and cd stops in the middle of running


HI\015\012\015\012HERE ARE SOME SIMPLE STEPS TO OPEN THE DRIVE. \015\012MAKE SURE THAT SLIDE BUTTON IS AT UNLOCK POSITION\015\012\015\012\015\012\015\012Step 1\015\012Power down the comp ... Lenovo 3000 Y410 Laptop

I turned on my toshiba l305s-5900d on day and it is asking for a bios password, but i never put on on it. does anyone have any help. i would apprediate any help. thanks john


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... Toshiba Satellite Pro L300 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0518 seconds