Having problems with your PC Desktops ?

Hi! the cd slot it not being recognized by the comp. i tried putting in a cd but it is not being shown?

Answers :

HI I have had this problem before so restart computer goto star computer and see if dvd drive there
\015\012 if not goto start/ accessories/system tools/system restore /
\015\012goto earlyest restore point/ should work/
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi! the cd slot it not being recognized by the comp. i tried putting in a cd but it is not being shown?

HI I have had this problem before so restart computer goto star computer and see if dvd drive there\015\012 if not goto start/ accessories/system tools/system restore /\015\012goto earlyest restore point/ should work/ ... PC Desktops

Installing more memory

Hi if you go to this site first www.crucial.com then look on the site and it will then scan your computer for you telling you exactly what memory you need like p100 or p133 as getting the wrong one will cause your computer to stop working ok. ... Compaq Presario 5000 PC Desktop

Post codes I have an IBM Intellistaton Z Pro 6221 what when turned on now only has 3 long beeps that keeps repeating. I can't find what this post code is. Any suggestions?

Dely with this earlier today (else why would I be here?) I tracked the beep codes through the labyinthine IBM support and basically got no answer. This is what IBM said in the "Troubleshooting POST/Startup" manual Beep code  3-3- ... IBM IntelliStation Z Pro 6221 PC Desktop

My cd ram stopped working

I just wanted to post a reply regarding a missing dvd/cd in the ?My Computer? & in the ?Device Manager?.\015\012\015\012I bought my Acer5610z in September of 2007, about March of 2008 I was unable to use my dvd/cd because it was not being recogni ... Acer Aspire 5100 Notebook

Acer Aspire 5601 4GB memory upgrade problem

Did you try swapping the order of the memory sticks in the machine? for example, if you put stick 'a' in slot 1, and then put stick 'b' in slot 2, did you reverse it and put stick 'a' in slot 2 and stick 'b' in slot 1? sounds corny but i have fixed ... Acer PC Laptops

How do I tell me emachine T5212 to recognize newly installed ram?

The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop

Adding memory, new total not recognized: IBM Thinkpad R51e-1844

Ram should always be paired. Same type, speed and size in each slot. You may have 1 SIMM/DIMM/DDR that has 2 sides of chips and the other with 1 which will do exactly what you state.\015\012\015\012RAM reads across the chips simultaneously. So if ... IBM ThinkPad R51 Notebook

Tyan S3992 MOBO with scsi drives and tape drive

Only if your BIOS supports booting off the particular device. You could also try to swtich the two PCI slots. Put the tape drive controller in the 1st slot,and the SCSI controller in the 2nd slot.Which tape drive is it? Is there a firmwa ... Computer Servers


This could be a few things though if you have already checked the memory and HD. The next thing I would tell you is that you should check the cpu. Also make sure that everything in the BIOS is set to the default settings when you start it. ... eMachines T6534 PC Desktop

Ma acer aspire 5738z does not start at all. the power on led nd the on/off buton light glows but the scree remains black. when i last left the comp i put it to sleep nd it went 2 sleep after installing new updates. now it doesnt respond after 5 hrs.only led light of power nd on off switch shows up..wat 2 do?

When you plug the DC power adapter and press on the power button, the laptop starts making normal noises, the LEDs work properly but noting appears on the screen. The laptop will not start.\015\012First of all, take a ... Acer Aspire 5735 Notebook

Computer keeps cycling off and on

Load defaults on the bios screen, save and exit, reboot. see if it recognizes your newly installed ram. also if you have 4 memory slots, try using different configuration on the placement of the ram modules. Like if you have four memory slots trying, ... E-Machines eMachines Desktop PC

USB 2.0 slot

Try to uninstall the usb driver then re-install it again. some features in the program can't recognized the device everytime you put on it. ... HP Pavilion A520n (DW233A#ABA) PC Desktop

Memory card not recognized

Try to put your sd card to the slot, and check device manager.\015\012check if there is yellow question mark on the device manager.\015\012if it is, it's driver problem, just update the driver.\015\012if not, try with another sd car ... Acer Aspire 5500 5570-2609 Laptop

Weird (?) RAM problems (screenshot included)

Hi im wesley. you might be getting a clash with the two different types of memory, you see when you add more memory its always a good idea to put in the same memory and speed size as what you already have in because if you put lower memory and a slow ... PC Desktops

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory

I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below

Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Power on no boot - PC Laptops

Ok lets try the simple stuff first:ATX reset: sometimes the motherboard can get stuck and hang, some people blame static buildup for it personally I think its just the BIOS hangs similar to the way windows does sometimes. Resolve this by ... PC Laptops

Fujitsu S6231 Notebook Issues

You may have a corrupt boot.ini file which will prevent windows from finding the boot instructions, so you may have to use your XP cd to repair windows.\015\012\015\012You will have to press F2 or Del on boot up to enter the cmos and change your cdro ... Fujitsu LifeBook S6231 Notebook

I have installed one 1gb chip into my emachines t5082 computer and it worked fine. So I got another and removed the original 512 MB chip from it and it won't recognize the second 1gb chip.

I'm assuming that your 2nd DIMM is the same type and speed as the 1st one you put in. If you are not sure, check and make sure that it is DDR2, 533MHz, PC4200.\015\012\015\012If they are not the same, that is most likely the problem. ... E-Machines T5082 PC Desktop

I tried to intall new RAM in a new Gateway DX4200-09. The computer came iwth 2 x 2 gig sticks of 667/800 dual channel 240 DIMM DDR2. I tried to add 2 more sticks of GEIL Black Dragon dual channel 800 DDR2 2 gig. The first time I tried I got a blank screen. I pulled the RAM out and rebooted. Everything was OK. I then reinstalled the new RAM, thinking that I didn't have it seated correctly, and nothing again. I took the RAM out, and put the case back together and restarted the computer. The only t

From what you've described, it sounds like you've got a bad DIMM slot, since it's not recognizing RAM that you know is good (because it works in the other DIMM slots).Since it's the DIMM slot, which is part of the motherboard, your safest ... PC Desktops

Serial joystick I've purchased an older Dell Pentium I and put a ISA SB16 card with gameport in the PCI to ISA bridge slot. Windows 95 recognizes with card and game port and software for the joystick enables me to use the joystick in Windows 95 (highest operating system available at the time) environment to calibrate. Problem exists when I try and use the joystick in true dos mode after reboot with popular game loaded Wing Commander's Privateer 2. I am using a boot disk but I am concerned that p

If you have Windows 95/98 its best to run in pure DOS mode \015\012 by selecting Start -> Shutdown -> Restart in MSDOS Mode. Don't use the bootup disk..Sound Card also has to have DOS Drivers for it's Game Port to work. Check Manuf ... Microsoft SideWinder Precision Pro 2.0 Joystick

Won't recognize Audio Driver..

Have you tried downloading it automatically? check the device manager right click and update driver don't forget to reboot? if your notebook is still under warranty check the condition if dell is going to replace parts or repair your computer for no ... Dell Inspiron 9300 Notebook

Computer died ?

Does the recovery work..if not u have to format the hard drive using a caddy on another pc OR you might even have to replace it coz it has been screwed and cannot be formatted and also be careful that viruses also damage real parts like processor mob ... Systemax AOL Optimized PC (100607) PC Desktop

Wont recognize new memory?

First try to reseat the memory, if it is still showing the same amount, then you may have a bad stick of memory, remove both and insert 1 stick into Dimm 1 slot and see if it still registers 894, then put the other in the same slot and see what it re ... Toshiba Satellite A135-S2386 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8488 seconds