Having problems with your PC Desktops ?

IBM Flatscreen saids No Connection....Check Signal Cable

\015 My daughter's flat screen was working fine. Now it has a black screen with that message moving around. I have checked the power cord and the cable and both are secure to monitor and back of stand up tower. I am left scratching my head. What could be the solution? Is there a fuse or something in the back that could be blown?\015

Answers :

No it is not the fuse ..but the fault is with the power supply.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

IBM Flatscreen saids No Connection....Check Signal Cable

No it is not the fuse ..but the fault is with the power supply. ... PC Desktops

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Wireless signal intermittent

First make sure you have the latest update for your bios and wireless device, your os is probably non preload so clean any access connections utility provided by ibm, rather than using the ibm thinkvantage access connection make sure to use the windo ... IBM ThinkPad T43 Notebook

How to remove ibm thinkcentre p4 3.0 motherboard

This is the link to the IBM ThinkCentre S50-8183, Hardware and Maintenance Manual,http://www-307.ibm. ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop

No video on Ibm Thinkpad T23

Hii also have a t23, and i have messed around with the display a lot...there are several things to consider:1) your operating system. i would assume you are using windows xp, and that you dont get video even before the OS starts up ... IBM ThinkPad T23 2647 Notebook

My Samsung 913t says "Check Signal Cable." HELP PLEASE!!!

Cheap CRT monitors can be picked up at Thrift Stores, quick and cheap way to test your computer output. ... Samsung SyncMaster 191T 19" Flat Panel LCD Monitor

No signal converter box.

Why is this in the computer section? \015\012\015\012Anyway, don't exchange the box just yet! First, can you access the converter's menu? Because mine automatically comes up with the "no signal, call customer service" message, but I ca ... PC Desktops

Dead My computer dead when electricity was down. i test power supply to another computer, it works. i put windows xp and install, on the mouse and keyboard stops functioning and fail to command installation.

\015\012\015\012Check your Keyboard-Video-Mouse (KVM) switch. If the system is connected to a monitor, mouse, and keyboard through a Keyboard-Video-Mouse (KVM) switch, or console selector switch, then disc ... IBM NetVista PC Desktop

No RGB imput signal

I am having a problem with my LCD Balance Monitor as well. I have both cables for the Monitor hooked up. ... Balance CM2015 15" LCD Monitor

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.

No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

Monitor comes up shows "acer" then says no signal and goes black

This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

Fan comes on but monitor says no signal the screen stays black and the fan keeps running won't turn off by button have to unplug it for it to go off

I assume you are hearing the power supply and maybe the CPU fan. If you can see what you are doing, then I wouldn't expect you to be able to turn off the computer any other way than doing a hard shutdown. I would not have bought a new monitor, ... eMachines T6420 PC Desktop

I have a D-Link DI-624 Wireless Router. My Comcast cable high speed does work but none of the wireless laptops are seeing the network. I've unplugged it etc but it still doesn't come up.

There are a few configuration problems that can cause this. lets start with the basics. I will assume two things for this process.a- that you will be right next to the router with a wireless laptop/computer so we can rule out transmission inter ... PC Desktops

How do I link my IBM t21 to my TV. The sounds works ok from the sound port, and i have an S-video cable to RCA connected, but do not get any picture on my TV

Http://www.youtube.com/watch?v=XqjJtdH_EI8\015\012\015\012\015\0121\015\012\011\011\011\011\011\011\011\011\015\0 ... IBM ThinkPad T21 Notebook

Ibm 14"crt monitor white light is blinking screen is blank

The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... IBM E54 15" CRT Monitor

Flickers until all monitor area turns gray - just like tv without signal

Your monitor has some hardware that is not stable, you need do follow steps\015\0121) open monitor check DC power supply board, there could be any capacitor swelling need to change, this cause DC filter fail.\015\0122) check the panel cab ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

Monitor displays "No Signal" from Compaq SR1110NX desktop PC. I replaced the power supply 2 months ago and added 1G of RAM. My daughter said it froze on her and tried to turn it off/on 6 to 8 times. Now is powers up, but just displays a steady yellow light. It did go green once after a restart and the drives appeared to be working, but still no signal to monitor. Tried different monitor and cable. Same result. Bad video? Bad motherboard?

Try with a different cable, the pins may be bent. If this isn't working get an additional video card and install it in your CPU. ... HP Compaq Presario SR1110NX PC Desktop

Boost signal to allow xbox live

1 buy and cantenna and a hawking hwug1 (from hawking website). install hawking on computer (usb wireless device) and then run the network wizard to make the connection a proxy server. run a lan cable from the computer to the xbox, and enable the wi ... HP Pavilion dv6000z Notebook

I've plugged in the monitor to my laptop. Yes, I have the correct cable plugged into the correct ports, and yes, they're plugged into power, and yes, I've pushed the button on the keyboard to transfer the image on the laptop screen to the monitor. However, when I turn on the monitor, it displays the message: "No signal input. Check video cable." and then goes to standby. This cable worked with another monitor a few minutes before, and I know I have it hooked up right, so what's going on? Is this

Hi,This is a Common problems with most of the Monitors. Try to wiggle with the Cable and see if that would help the situation. As you said, you have already checked Port, Cable and you are sure they are seated in a correct manner, it sou ... Hannspree HW191D LCD Monitor

My loptop is an Averatec 7100. How can I test the motherboard? I took it to a computer repair shop and they said is the motherboard, I want to know how can I test it on my own.

This is more of a system diagnosis that an actual motherboard testing procedure, but since all components attach to the motherboard in one way or another it could count as a prcess of elimination......\015\012\015\012 ... PC Desktops

I have bought a second hand monitor model is 6736-hcp off my mate but after pluggin in it the picture is not that clear..its kinda blurry and moving .I have downloaded drivers online for the very monitor but the problem is still there. What can i do it fix it? i never got a cable with it while i was buying it so i had to get one from the shop which i did. Someone said it could be the cable but i need to know more about what the problem could be.Thanks''Dave

If the monitor didn't have issues when he had it (and you didn't drop it, or bang it into anything), and you've installed the latest drivers, then the problem has to be in the cable or the monitors settings.First try opening your monitor' ... IBM Open Box 6736HC9-BLC THINKVISION L200P Monitor

Bluish screen -

Is it a greenish blue?..... if so you have lost your red signal..... check your monitor connectors for bent or broken pins...... usually happens after swapping cables or monitors on a computer..... you could also have a bad cable or monitor.....\015\ ... MPC Computers Envision EN 5100e 15" Flat Panel LCD Monitor

My l g monitor screen suddenly turned into pinkish colour..i dont know whats the problem..i did degaus also but no use..

Dear Sir \015\012Welcome to Fixya Customer Support \015\012We will Help You\015\012Generally this problem arises due to faulty monitor Signal cable or by broken fins of VGA cable.check your monitor connectors for bent or broken pins ... Computer Monitors

Monitor Turns Black

This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

Problems connecting my acer laptop with tv

Sound and picture are two seperate things unless you use an HDMI cable so lets just deal with the picture first\015\012\015\012After you do the connection, you need to tell your laptop to present the picture to the TV.\015\012\015\0121- O ... Acer Aspire 5102WLMi Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3859 seconds