Having problems with your PC Desktops ?

My eMachines w3503 won't work anymore.

\015 My eMachines w3503 desktop was screwing up, and we tried everything the screens told us to do. Tried to reinstall something, but now about all I can do is turn it on. I can't log in, I can't do anything with it. I need advice as to how I can fix it.\015

Answers :

Does it say to go to 'setup' during first part of new start? If so, go there when it gives you that option and, if the first page looks ok except for the current time setting, select 'save and exit', then select 'y' and 'enter' (all entries from the keyboard as the machine is in DOS mode and the mouse does not work at this point). Retry a new start. Make sure that the operating system brings up the desktop (windows). Set the clock then shut down. wait a few minutes, restart again. If the time is off or completely wrong, You probably have a dead CMOS coin cell battery on the motherboard. After replacing it, you will have to do the 'setup' screen again.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My eMachines w3503 won't work anymore.


Does it say to go to 'setup' during first part of new start? If so, go there when it gives you that option and, if the first page looks ok except for the current time setting, select 'save and exit', then select 'y' and 'enter' (all entries from the ... PC Desktops

I put xp on my Emachine W3615 and nothing works now


See if you could get Ubuntu Linux. This operating system, should work out of the box. If you can get the CD, you could also try using it without actually installing it. ... eMachines W3619 PC Desktop

Emachine wont start


How many hours you working you computer? 1 or 2 or 3 hours?\015\012if you working 2 or 3 or 1 then automaticaly shutdown then, when you push the power button the cpu fan is working but in few minuts shutdown again,.... check you cfu pan maybe t ... eMachines T6211 PC Desktop

Emachines e625 integrated webcam wont work


You should find out if the webcam is by a certain company if so you need to download their software and drivers for it. This should work. Let me know if you need more help. ... PC Laptops

Battery wont charge


Try soldering the four pins at your motherboard, if still won't work your MOBO is bad...sad to say that...bring it to Tech'n. that repairs MOBO or else you have to buy another one... ... Dell Inspiron 6000 Notebook

Im using ASUS VW193T LCD monitor for my pc...the problem i encounter now is that it turns off automatically but my cpu still on then it turns on again...sometimes it turn off then when it turn on again my wireless keyboard is not working anymore, then my printer turn offline too when i print out...there are instances that my monitor turns off and my cpu still on but it wont restart anymore even i restart my cpu it wont work...so what i do is turn off my AVR just to turn off my cpu..pls help me w


Im quick guess would be nyou have a Bios MotherBoard Video Card Problem. If you are using an on board video card then that doubles your chances or it being *********** boards fault. Also do a google search for ways to reset *********** boards bios th ... ASUS Computer Monitors

It keeps shutting down on us


If you have tried to boot in safe mode as wayneard has requested and it still does not boot and shuts down then you may need to restore your system.\015\012\015\012However if you have tried to boot in safe mode and it allows you to then u ... E-Machines eMachines Desktop PC

Speakers work,dont work


Opening the case and changing the speaker wire to a heavier gauge speaker wire will correct this problem and as jeffcarlson7 says soldering the ends but there is a better way also is to go and purchase connector ends at the local Radio shack and sold ... Durabrand 5.1 Surround Sound Computer Speakers

E machin w3502 wont work at all


I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC

Dell inspiron 1501 work fine turn off last night now wont turn on


You mentioned trying a different battery, try a different AC adapter.\015\012\015\012When plugging in the ac adapter to the wall, see if the POWER LED comes on on the adapter, then when you connect it to the computer, see if the LED stays ... Dell Inspiron 1501 Notebook

My toshiba laptop wasnt loading up and i tried all the settings like safe mode and none of them worked. i don't have a restore disk so i used the one for my emachines computer. it was working fine until i tried to connect the internet to it, it won't recognise the internet cable and so i can't install it. also, the sims 2 won't work, it says directx 0.9 isn't installed. my digitaltv won't install on it either and it comes up with something about component XXXX. finally, when you turn off the com


When you use a generic install disk, instead using original recovery disk, you need to re-install all drivers.Network wont work until you install LAN card driver, games and other software wont work correctly until you install proper video drive ... Toshiba PC Desktops

I have emachine w3400 not powering . plz help


I found this right on this website, hope it works!As for the fans, make sure your connections are tight and in the proper sockets. ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Logitech rumblepad 2 wont work on Lego Star Wars anymore.


... Logitech Rumblepad 2 Game Pad

CD drive not working


Based on your indication the CD drive is clean, and you know the cables are attached to it, inside the computer. (Flat ribbon IDE interface cable, and 4-pin Molex connector power cable)1.Go to Device ManagerLeft-click on Start ... Sony VAIO PCV-RX462DS PC Desktop

External monitor wont work after system reeboot


Try using pupppylinux livecd this will allow your to boot into linux and probably view everything on the external monitor. Then you could install puppylinux to hard disc and bingo you have a working pc again, you could even rescue data off the drive ... PC Laptops

EMACHINES PROBLEM. IT WONT START UP HELP IMMEDIATELY!


That's great, since you need it for work I'll charge you my going rate, OK?     The simplest way of curing this is to put your machine's drive in a USB enclosure so you can use a working machine's antivirus/anti-spyware on it, an ... E-Machines eMachines Desktop PC

Menu/screen resolution/contrast box keeps popping up on screen.


By what your describing, the board in the monitor that allows you to make changes to the display is going bad (sounds like the settings button). If it were a notebook you might be able to get a board replacement (just an example I know notbooks dont ... E-Machines eMachines Desktop PC

Computer will turn on but wont boot


OK, have you tried checking the connections on your hard drive, afterwards try rebooting. If it still wont boot i suggest you back up data and boot the restore CD that came with your PC. If it still doesn't work , check your BIOS, most BIOS progra ... PC Desktops

My emachines wont turn on


Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC

Needed driver for Network : 10/100Mbps integrated Ethernet driver


Gateway (eMachines manufacturer) has a driver database for your model of computer. I myself have several eMachines of my own and am pretty sure they all have the same 10/100 Ethernet board. If you are unsuccessful with Gateway, write back and I wil ... E-Machines T6420 PC Desktop

Microsoft word 2007 wont work on my computer anymore when it was working before. Theres no problem with my computer its pretty brand new.. Microsoft just wont work.. I can open documents but cant edit,paste etc.. Does anybody know what I can do??Thank-you. Emma..


Hi Emma,If you got the laptop with MS Office 2007 preinstalled, then i am in no doubt that it was a trial version of office which has expired.This means that Office 07 is only given to you as a teaser and Microsoft want you to purchase a ... Sony PC Laptops

Acer Aspire 5570 black screen.


This problem occurs in most Acer laptops. Its actually a bug in the mother board. Try reinstalling the clock battery or give it to your nearest service center. ... Acer Aspire 5500 5570-2609 Laptop

Still having trouble with EMachines T3882


I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the p ... E-Machines eMachines Desktop PC

Computer start but wont Boot up.


Here are a couple steps you can do to verify something didn't come on correctly. - Verify the monitor cable is connected tightly to the monitor and PC. - Verify the power cable is plugged in.If both of these check out is ther ... eMachines W3623 PC Desktop

Ip config is not finding my ip address?


Now what is the mode of the machine?? ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7941 seconds