Having problems with your PC Desktops ?

Dead Driver for Easy CD Creator

\015 I tried to install Easy CD Creator. It failed because there is no Vista driver available.But now I get a driver error message EVERY time I power up my PC. Very annoying. How can I uninstall the pesky driver? I`ve uninstalled Easy CD Creator already.Running a Quad core PC with Vista home premium.Your advice would be much appreciated.\015\012Art\015

Answers :

Hi,
\015\012Resolution WARNING: THIS PROCEDURE MIGHT CAUSE ANY OTHER ROXIO OR ADAPTEC SOFTWARE INSTALLED ON THE PC TO BECOME INOPERABLE. PLEASE UNINSTALL ANY OTHER ROXIO OR ADAPTEC SOFTWARE FIRST BEFORE ATTEMPTING THE LISTED PROCEDURE.

\015\012
    \015\012
  1. Renaming the Take Two system file

    \015\012
      \015\012
    • Click on the Start button, and then select Search \015\012
    • Search your Local Hard Disks for the following file prtseqrd.sys \015\012
    • If you do not find this file, please go to step 2 \015\012
    • If found, right click on the file and then click on rename. Change the file extension to ROX (i.e. prtseqrd.sys would be renamed to prtseqrd.rox)

      NOTE: If you decided to not finish this article at any point please rename this file back, you will be doing that later in this article. right hand corner of the window


    \015\012
  2. Remove Easy CD Creator 5 from Add/Remove Programs

    \015\012
      \015\012
    • Click on the Start button, then go to Setting and select the Control Panel \015\012
    • Double click on the Add/Remove Programs icon \015\012
    • Uninstall Adaptec Easy CD Creator 5, if prompted choose No to reboot the PC \015\012
    • Then click the X in the top right hand corner of the Window to close the control panel


    \015\012
  3. Removing Directories from your Hard Drive

    NOTE: All directories stated might not be found

    \015\012
      \015\012
    • Click on the Start button, then right click on the My Computer icon and then select Open \015\012
    • Double click on the icon for the Local Disk that the software was installed to \015\012
    • Double click on the Program Files folder \015\012
    • Locate the Roxio and Adaptec folders, right click on each folder and choose Delete \015\012
    • Go to C:\\\\Program Files\\\\Common Files folder, locate the Roxio Shared and Adaptec Shared folders, right click on each folder and choose Delete \015\012
    • Go to C:\\\\Program Files\\\\Common File\\\\InstallShield folder, locate the Engine and Iscript folders and rename them to Engine.ROX and Iscript.ROX. Once all the directories are remove right click on the "X" in the top right hand corner of the window to close it


    \015\012
  4. Rename additional files on your hard drive

    NOTE: All files in the list might not be found

    \015\012
      \015\012
    • Click on the Start button, and then select Search \015\012
    • Search your Local Hard Disks for the following files:

      *CDR4_2k.sys
      *CDR4_XP.sys
      *Cdr4dll.dll
      *Cdr4vsd.sys
      *Cdr4vsd.vxd
      *Cdral.dll
      *CDRALw2k.sys
      *Cdrtc.dll


      \015\012
    • If found, right click on the file and then click on rename. Change the file extension to ROX (i.e. cdrtc.dll would be renamed to cdrtc.rox) \015\012
    • After all files are searched for and renamed close the search window by clicking on the "X" in the top right hand corner of the window


    WARNING: THE NEXT STEPS INVOLVES EDITING YOUR SYSTEM REGISTRY. WE STRONGLY RECOMMEND YOU EXPORT YOUR REGISTRY BEFORE SYSTEM DAMAGE. WE RECOMMEND THAT IF YOU DO NOT FEEL COMFORTABLE EDITING YOUR REGISTRY THAT YOU SKIP THESE STEPS.

    \015\012
  5. To export a copy of your registry, please do the following:

    \015\012
      \015\012
    • Click on the Start button, then select Run \015\012
    • Type regedit and click the OK button \015\012
    • Locate and left click FILE in the upper left hand corner of the Registry Editor, then click on Export \015\012
    • Choose the Desktop as the location to save the file in, and name the file regbackup \015\012
    • Also ensure that under the Export Range section there is a dot beside All \015\012
    • Click on the Save button. Your registry should now be backed up to a file named regbackup.reg on your desktop.


    \015\012
  6. Remove the Roxio and Adaptec registry entries

    \015\012
      \015\012
    • Expand the HKEY_LOCAL_MACHINE key (looks like a folder) by double clicking it (or clicking the + next to it.) \015\012
    • Expand the SOFTWARE Key \015\012
    • Locate the Roxio and Adaptec folders, right click each folder and click on Delete \015\012
    • If prompted to confirm the delete click the Yes button \015\012
    • Collapse the keys that you expanded by double clicking the expanded key (or clicking the "-" next to them.) \015\012
    • Expand the HKEY_CURRENT_USER key \015\012
    • Expand the SOFTWARE key \015\012
    • Locate the Roxio and Adaptec folders, right click on each folder and click on Delete \015\012
    • If prompted to confirm the delete click the Yes button \015\012
    • Collapse the keys that you expanded by double clicking the expanded key (or clicking the "-" next to them.)


    \015\012
  7. Remove the UpperFilters and LowerFilters values:

    \015\012
      \015\012
    • Expand the HKEY_LOCAL_MACHINE key (looks like a folder) by double clicking it (or clicking the "+" next to it.) \015\012
    • Expand the SYSTEM Key \015\012
    • Expand the CurrentControlSet Key \015\012
    • Expand the Control Key \015\012
    • Expand the Class Key \015\012
    • Please look for a key containing the following string of letter and numbers: {4D36E965-E325-11CE-BFC1-08002BE10318} \015\012
    • High light this key by left clicking once on it \015\012
    • On the right hand side you are looking for UpperFilters and LowerFilters under the Name column, once you find these please delete them by right clicking on them and choosing delete

      Note: It will be easier to use the Registry editor in the future if you collapse the keys that you expanded by double clicking the expanded key (or clicking the "-" next to them.)

      \015\012
    • Please exit the registry by clicking on the "X"in the top right hand corner of the screen


    \015\012
  8. Renaming the Take Two system file

    \015\012
      \015\012
    • Click on the Start button, and then select Search \015\012
    • Search your Local Hard Disks for the following file prtseqrd.rox \015\012
    • If found, right click on the file and then click on rename. Change the file extension to SYS (i.e. prtseqrd.rox would be renamed to prtseqrd.sys)


    \015\012
  9. Shut down and Reboot the PC

    \015\012
      \015\012
    • Click on the Start button, then click on Shut Down \015\012
    • Choose the Restart option and click the OK button \015\012
    • Adaptec Easy CD Creator 5 should now be removed from your PC
\015\012
\015\012Kindly give a feed back to Improve my statistics and to see If it was helpful for you...
\015\012
Thanks and Regards
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dead Driver for Easy CD Creator


Hi,\015\012Resolution WARNING: THIS PROCEDURE MIGHT CAUSE ANY OTHER ROXIO OR ADAPTEC SOFTWARE INSTALLED ON THE PC TO BECOME INOPERABLE. PLEASE UNINSTALL ANY OTHER ROXIO OR ADAPTEC SOFTWARE FIRST BEFORE ATTEMPTING THE LISTED P ... PC Desktops

EZCD 5.0 and EZCD 6.0


I don't think that 6 and 5 are compatible 6 is an upgrade from 5. I have just 5 on one of my old XP computers and it works fine, but that's all I have. I went to the website and they are not giving any support for Roxio 6 anymore. \015\012I ... Roxio Easy CD & DVD Creator 6 (cdrvlpe6101250) for PC

I keep getting a message from Sonic saying, Installation package for the product SONIC DLAcannot be found. Try the installation again using a valid copy of the installation package. It says that DLAENU.msi is missing. I go to Sonic, and can't get any answers. I have a Dell computer with windows XP, and it was installed by Dell. It is a combo drive. I tried the restoration disc I get with the computer, and it is USELESS!


\015\012Article Details\015\012ID Number: 000131CR \015\012Products: Easy Media Creator 9Easy Media Creator 9 DeluxeEasy Media Creator 9 Trial Version WinOnCD 9W ... PC Desktops

Dvd drive wont work


That error and a number of other error codes can be reported for a DVD or CD writer if something has damaged one of the filter drivers, which are called Upper Filter and Lower Filter drivers in the Windows Registry. They can be installed by CD-writin ... Toshiba Satellite A100-S8111TD Notebook

Is it possible to restore data from a dead SATA 120Gb Hard Drive by myself? what tools do I need? From the sounds of the drive, I guess it has mechanical failure. Any cheaper places or ways to restore data from dead hard drive ? I assume it is mechanical failure. Is bigger storage size(e.g. 160Gb) easier to get broken then internal SATA 120GB Hard drive? When installing XP on a replaced (new) hard drive on my ACER laptop, I need to download and install drivers. Do I need to know any password


If you want to replace a new hard drive it will good ...for driver you can download from acer download center its fully easy ..... for installing XP and driver it will take only two hours ....... \015\012\015\012goes through below li ... Acer TravelMate 8200 Notebook

How do i restore back to factory settings - HP Pavilion dv9000z Notebook


You will need to press the F11 key as the laptop is starting up. You should see this prompt in the top left hand corner just before the windows logo starts. The rest is yes or no answers to begin a factory restore or attempt repair. If this fai ... HP Pavilion dv9000z Notebook

HP Pavillion Laptop ze4420us CD Burner Not Working


You might find this link helpful then.\015\012\015\012I go through this site for a number of fixes and ideas.\015\012\015\012http://www.pchell.com/support ... HP Pavilion ze4420us Notebook

Don't know how to restore files from backup done with North Ghost


Using Norton Ghost 9.0 is very good program to backup your System & Documents.You said the PC is dead then you want to restore back your System to a new PC.All you have to do is that Norton Ghost 9.0 CD is Bootable.Of course als ... Symantec Norton Ghost 9.0 for PC

Computer does not recognize DVD drive


I had this problem on my computers search the internet and there is a step by step which will solve it. worked on my pc and laptop\015\012Many third-party programs that control CD or DVD burning (as well as some player applications) install CD- ... HP Pavilion dv9000z Notebook

Media Center Receiver Service has encountered a problem and needs to close.


If you delete the information in the Control Panel and restart your computer, it will look for the driver by itself. ... PC Desktops

HL DT ST DVDRAM GMA 4082N ATA Dav5ce has registry corrupted Could you help me It does not work


HI ,\015\012This is problem is comming due to Your registry might be corrupted so -\015\012\015\012loadTOCNode(2, 'resolution');\015\012\015\012\015\012\015\012\015\0121.\015\012Remove the Upperfilters and Lowerfilters value ... Lenovo 3000 V100 Notebook

Burn cds can't get computer to burn acd neither with pictures or songs and have used different cds


Hi first thing go to startcontrol panel printers and other hardware system (on left side)hardware device manager DVD / CD rom drives does it show up as a burner? DVD-RW or CD-RWi ... Dell Dimension 5150 (DIM515MIN) PC Desktop

Laptop acer 7720 code 39


1.\015\012Remove the Upperfilters and Lowerfilters values completely from the following registry key: \015\012HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\Class\\{4D36E965-E325-11CE-BFC1-08002BE10318}NOTE: If yo ... PC Laptops

How do i repair ''Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).'' It's my cd drive ATAPI DVD A DH16A6L-C ATA Device. Windows Vista SP2. Please help ASAP


Fixing the problem simply involves deleting the filter entries for the third-party device drivers. These entries can sometimes become damaged (which is what produces the "corrupt registry" warning).To delete the offending keys, open the Registry and ... PC Desktops

Some of the programmes not opening


When your operating system begians fail all kinds of weird things can happen. Blue screens come from software & hadware. (shame you did not write down the message shown while in the blue screen)\015\012First run a full system scan for a vir ... HP Pavilion dv6000z Notebook

Pavilion dv 9910us blue screen IRQ-NOT-LESS-OR-EQUAL


This problem may occur if you are using a version of the DirectCD component of EZ CD Creator that is incompatible with Windows XP. Resolution-\015\012\015\012\015\012\015\012\015\012• If Easy CD Creator is still installed, unin ... HP Pavilion dv9000z Notebook

HL-DT-ST DVDRAM GSA T20N ATA DEVICE


Fixing the problem simply involves deleting the filter entries for the third-party device drivers. These entries can sometimes become damaged (which is what produces the "corrupt registry" warning).To delete the offending keys, open the Registry and ... Acer Aspire 5315 Notebook

Doesn't work all the time and makes a whirring noise, do i need to buy a new cd/dvd drive?


Before you beginTo determine if the CD or DVD drive displays on the My Computer screen, follow the steps below.\015\012\015\012\015\012Turn on the computer and remove any discs from the CD/DVD drive.\015\012 ... HP Pavilion dv6000z Notebook

Not show a drive - Roxio Easy CD & DVD Creator 6 (cdrvlpe6101250) for PC


Click start Go to my computer go to hard drive right click go to propeties click hardware click properties click driver go down to uninstall pc will restart then pc will find new hardware then restart one more time ( FIXED ) (- .' ... Roxio Easy CD & DVD Creator 6 (cdrvlpe6101250) for PC

Software doesn't work anymore


If you got this scanner to work with Windows 98, the scanner is an antique. New scanners are so much better, my first suggestion is to get a new scanner, one that works with Vista as well as XP. It will have all new software that comes with it. ... Computer Utilities & Maintenance

Dvd burner problems with HP Pavillion DV9429us


Buy an external USB DVD-RW drive. ... PC Laptops

Dell E173FPc 17" LCD Monitor Problem:


Although similar, this monitor and the associated repair is different than the "b" version. The link above is good to follow ... Dell E173FP 17" LCD Monitor

Activation Failed! When I try to activate my DVD XCopy software, I get a message stating "the server sent an invalid response. Contact Tech Support." Please help me to activate my software When I try to activate my DVD XCopy software Version 3.1.1, I get a message stating "the server sent an invalid response. Contact Tech Support." Please help me to activate my software


Description: This article aims to introduce an easy way to unlock iTunes purchased movie and convert DRM M4V video to Moto X for playback on Windows and Mac. Source: How to record iTunes M4V videos on Motorola Moto X? http://best-tablet-conve ... 321studios DVD X Copy Platinum (200000) for PC

I have easy Cd/dvd creator 6.1 basic and have updated firmware and software and still wont recognize my recorder dvd-r/rw drive that the software came with. am i missing drivers or what?


Hi,With the indulgence of Ekse,Initially and if you are using XP, you can try > ... PC Desktops

IBM R40 Screen Problems


I think you have an inverter board thats just about dead. It's located in the screens plastic housing at the bottom of the screen just above the keyboard. It's about 4 inches long and a half inch wide.There's just one little cable connecting it. But ... IBM 11P836402 for ThinkPad R40 Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5618 seconds