Having problems with your PC Desktops ?

Motherboard E210882 on Emachines Model W2888 pin configuration

\015 I have an Emachines Model W2888 with motherboard E210882 and I do not know in what order the 3 2-wire plugs for the PWR LED, PWR S/W and HDD LED go on the pc board. I removed them all at once , thought they were all on 1 plug like an HP.There are 3 white wires on each plug, and a red, green and black.I Really need a wiring schematic, any help would be appreciated.\015

Answers :

Here is a link to the manual,It is in PDF format
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Motherboard E210882 on Emachines Model W2888 pin configuration

Here is a link to the manual,It is in PDF format ... PC Desktops

I have a T2958 and toof the face off. Can you

EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

I would like an internal view of eMachine T4150 to be sure everything is connected correctly

There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Not turning on, has power and everything

Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard

FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

I want to expand my memory, so I went to Fry's with my computer model number and bought a 1Gig memory card, brought it home and the pin configuration doesn't match. The one I bought has two rows of pi

Go to http:\\\\www.pby.com and look at the memory configurator. You will be asked about your system (make and model). They will then advise you of the specific part number for your memory. Keep in mind, you should never expand upon existing memory ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

EMachines Imperial GL VE-20021218 Motherboard Pin Out

I have an HP pavillion a305w with the same Imperial MB, and I replaced my MB with an ASUS P4SGX-MX.\015\012from your case, the yellow/black goes to the IDE Led, the green/black goes to the POWER Led, and the red/black goes to the POWER SWITCH ... PC Desktops

Front panel leads Emachine model T2862

E-machine model T2862 pin-out for the 10-pin front panel header is screen-printed on my Emachine's motherboard, but is so small and far away from the actual pin location, that it is likely being overlooked. If looking into the computer case from the ... PC Desktops

Wires from switch came unplugged (white and black) where do they

Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

Monitor reads: PC entering power saving mode then shuts off;PC on

First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

T2893 desktop did not power on when I hit the power button

If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

Cant remember were the wires go to plug in the power button to mother board black/white green/white red/white on the Emachine Desktop PC

Hiif you look closely to the board you will see white text that explains what two pins are for what, also if you can provide me with the model of the motherboard, the connections are documented in the user manual,its a emachi ... PC Desktops

EMachine Model T3828 No power

Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

How do you set a samsung ide hd to master mode

Hello arrowllc\015\012\015\012That will depend on (1) the model hard disk drive (HDD) and (2) whether or not the HDD is the only drive on that IDE channel.\015\012\015\012If you'd still l ... PC Desktops

No power at all. Changed PSU and still no luck. MOBO light comes on but nothing else. I need to check the connections to the J9G1 jumper too.

If you changed out the power supply, and checked all the cables, checked and made sure the power switch was on, checked the switch for 110/220 on back of computer, confirmed it was plugged into a good socket, check the cable that connects the motherb ... PC Desktops

I cant remember my bios password its a acer aspire3624wxci made june 2006

I could not find that model number computer. There are a couple things you can do:\015\012\015\0121) Power down. Remove the power cable. Press and hold the Power On button until the fans stop. Look on your computer motherboard to see if y ... PC Desktops

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together

Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

Disconnected wires I have an emachines computer and my wires for the on/off button are disconnected from moterboard .

If you feel comfortable working inside the computer, after taking electrostatic precautions and ensuring the power is off and disconnected, look for a group of colored wires which plug on to a set of pins near one corner of your motherboard. The pow ... E-Machines Athlon XP 2200+ (rb-t2200-c67)

Emachine W2047 No BIOS Start Screen

You can test the power button. Remove the wires from the power on pins on the motherboard. Momentarily jump the two pins with a small screwdriver. If the computer starts the power button is bad. If it still doesn't start then something else is wrong. ... E-Machines eMachines Desktop PC

My computer w2686 do not start

I'm assuming that when you say "unplugged" that are you are meaning to say that you're unplugging the IDE ribbon but still leaving the power plugged in to the device.Try resetting your CMOS settings by using the jumper on the motherboard. ... E-Machines eMachines W2686 PC Desktop

Toshiba Satellite BIOS Password Bypass

A. By Using the Motherboard Jumper:\015\012In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.\015\012Almost all motherboards contain a jumper that can clear a ... Toshiba Satellite A105 Notebook

How to install memory for T3642 eMachine - E-Machines eMachines T3830 PC Desktop

EMachines T3642 Computer takes the PC2-5300 DDR2 SDRAM DIMMs. Supports Dual Channel DDR2. Memory Type, and comes installed with 1.0 GB = 512 MB (removable) + 512 MB (removable) of Memory. You can upgrade your eMachines eMachines T3642 Computer to up ... E-Machines eMachines T3830 PC Desktop

Tried to upgrade ram with 2 new pc133 sticks of 256mb ea. Didn't work. What's wrong? Are there switches on the motherboard I need to change? Or something else?

No there are no DIP switches to change, or jumpers to move on your motherboard, in regards to your BIOS recognizing ram memory installed. (BIOS. Basic Input/Output System. This tiny program, {64MB in size usually}, that is burned into your BIOS ... E-Machines eMachines Desktop PC

Unable to run in dual channel mode

Hello,Welcome to FixYa.Currently there is no bios update for your system. In the course of operating my business I have seen dual channel RAM run in single channel as a result of the CPU in use. This should not be the case in your m ... E-Machines T5082 PC Desktop

Need schematics for front panel , power sw , pwr led , hdd led et

Try this link to Emachines page. After you put in the make and model and stuff you should be able to view the user manual for your machine. If this isn't what you need you are able to contact support from this page and maybe they can direct you to a ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8204 seconds