Having problems with your PC Desktops ?

Monitor Mag innovision 796PF. 30% more Black screen

\015 Monitor Mag innovision 796PF. When he start it's black. It have a botton for some zoom,vivid,gold mode. In Vivid mode it is 30% more brighter and thet is only solution to i see something normal,but before that i cross from Zoom mode and i have to change again resolution. Most embarrassing thinks is ... when i turn some game it going again Black,when i push Alt+tab and other things.\015

Answers :

This sounds more to me like you are experiencing problem with your video adapter than the monitor itself. Have you tried a different video card? If you have onboard graphics, you may have to disable it in BIOS inorder to install a new graphics card. Monitors usually either work or they don't. If it requires you to change modes and readjust resolution, it is probably the video card.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor Mag innovision 796PF. 30% more Black screen


This sounds more to me like you are experiencing problem with your video adapter than the monitor itself. Have you tried a different video card? If you have onboard graphics, you may have to disable it in BIOS inorder to install a new graphics card ... PC Desktops

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

MAG Innovision LT916S monitor problem


Hi this is the way how to examine\015\012what's wrong with your monitors. After you turned it on and the screen went black, you have to check that if you can see the image on the screen or\015\012not by shining a flashlight into the screen, not ... Mag Innovision 19" LCD Flat-Panel Monitor LT916S

Picture goes black on Mag Innovision LT765b


I used to repair LCD monitor from Dell. It works for me. You might be using\015\012these following steps to examine what wrong with your monitor. After you turned PC on and\015\012monitor stopped working or went black, you have to check that if ... Mag Innovision LT765b 17" Flat Panel LCD Monitor

MAG Innovision LT1919WDb flat screen goes black


When a monitor works for a few seconds or more and goes black it is a problem with the power inverter board over heating because of a bad capacitor or capacitors that are not the right size. There is no problem with the VGA controller since it shows ... Computer Monitors

MAG Innovision LT2219WDB monitor will turn on -picture up clear as ever and 2 seconds screen goes black, turn it on and off screen comes up clear as always and 2 seconds goes black. will not keep the picture up. what is wrong. hooked my old monitor up it stays up clear as ever. MAG monitor is only 18 months old, 6 months out of warranty. has anyone had this happen or know what i need to do.


I have the same problem with a customer's monitor (LT716S); it turned out to be damaged power supply board. As I understand it, MAG has a 3 year warranty on parts, will probably charge you a flat labor fee plus shipping. If you do not have your pur ... Computer Monitors

MAG innovision LT917s problems


K I just fixed mine! I hope you still have your screen dude. Its easy. Take the screen apart, and take the monitor part off, open up the part thats attached to the back, and remove the big silicon peace thats attached with the golden bolts. Look at t ... Mag Innovision LT976S 19" Flat Panel LCD Monitor

Monitor Message = "No Signal"


See i use Compaq toothey don't generally except other modes did u try that monitor with other pc where it workedu should install proper monitor software ... u will found it from the cd given wit Ur monitor ... Mag Innovision lt456s 14" Flat Panel LCD Monitor

Mag Innovision LT776s Model 780


Sounds like an inverter problem. If the power supply is internal replace the capacitors coming out of the voltage regulators. These are usually 1000mf and/or 470mf. If that doesn't do the trick look up the numbers on the 8-pin chips that drive the se ... Mag Innovision LT776s 17" LCD Monitor

Black screen mag innovision 568 screen is black


Depending on what kind of laptop you have, your button may look different. Look at the Function keys (all those keys up at the top that have F's in front of them) and see if there is another colored symbol on any of them. You should find a colored sy ... PC Desktops

MAG Innovision 900w flat screen... how to?


This is a common problem due to capacitors in the inverter circuit going bad. The inverter provides the voltage to light the backlight, so the lamp is usually not the problem.If you open the case on the monitor (sometimes that's a challen ... Mag Innovision 19" LCD Flat-Panel Monitor LT916S

LT582s Mag Innovision


Hi,It all depends if the Mag has been used before on the same system or it is a new installation or on a different computer.\015\012\015\012If it is connected to an existing set-up and has been used ... Mag Innovision LT576s 15" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


This is an easy problem to diagnose but not so easy to fix. the power inverter for the backlight is dead. this is a very common problem with lcd monitors, if it is a module they are usually range in price from $20-75. ... Mag Innovision LT982s 19" Flat Panel LCD Monitor

Screen shrinks monentarily then zooms in untill screen is blank, then turns off.


OK PEOPLE I GOT THE SOLUTION TO THE MAG INNOVISION LT916S GOING BLACK AFTER ANY LENGTH OF TIME BEING ON!!! I JUST REPAIRED MINE TODAY! THE PROBLEM IS THE CAPACITOR BANK IN THE POWER SUPPLY PART THERE ARE 6 CAPACITORS I HAD A FEW LEAKY ONES "NOT GOOD" ... LG Flatron 915FT 19" CRT Monitor

Monitor takes several minutes to come on


Ur problem is with VGA port of ur monitor check it out wether its connection loose or not the problem is of power signal its not getting a proper current supply so check it out otherwise repair it..... ... Mag Innovision Computer Monitors

PC or monitor, signal problems


Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

How to disassemble Mag innovision 19" monitor


Once the 4 screw at the bottom of the screen has been removed the frame surrounding the lcd should slide up and away. The display itself is fastened to the plastic back by 6/8 screws be careful when removing the lcd screen since it is still attached ... Mag Innovision LT782S 17" Flat Panel LCD Monitor

Mag LT776s monitor goes black


Hi this is the way how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen went black, you have to check that if you can see the image on the screen or\015\012not by shining a flashlight into the screen, ... Mag Innovision LT776s 17" LCD Monitor

Monitor goes black but green light still on.


The problem with the Mag lt916s is that it is made with cheap capacitors. If you are interesnted it is a cheap and easy fix. Open it up, which is the hardest part. And replace the six 470uf 105 degree 25v capacitors and maybe even the smaller 220u ... Computer Monitors

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

I have a Mag Innovisin monitor that I use with my laptop so I have a bigger screen. It will turn on but after 1 second the screen goes black. Any ideas what's causing this and if it can be fixed?


Eadaniels, Could be <$10 on DIY repair if you know what a soldering iron(pencil) is used for! $40 - $80 if contract out work to local electronics tech that understands forwards and backwards common known fault conditions for CCFL back-lit LCD moni ... Mag Innovision Computer Monitors

Mag Innovision 765S Screen Flashes on and off.


It sounds like it is trying to re-synchronize it self and not going back the the default setting. Compare the resolution of the game to your monitor capabilities. \015\012 ... Mag Innovision InnoVision LT 765S 17" Flat Panel LCD Monitor

What is needed to hook up monitor


I HAVE THE MONITOR CORD FOR THE MONITOR, BUT NO POWER CORD.WHERE CAN I BUY A POWER CORD FOR A 2002 MAG INNOVISION. ... Mag Innovision InnoVision LT865s 18" Flat Panel LCD Monitor

Moniter stays blank


I used to repair LCD flat screen from Dell. I am not sure that my method might be applicable to your CRT monitor. Anyway this is how to examine what wrong with the monitor. You have to\015\012check if you can see the image on the screen or not after ... Relisys RLT1720 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7713 seconds