Having problems with your PC Desktops ?

Having problems getting two monitors to show up on Display Appearance screen. I bought a Nvidia low prolfile AGP card and now the on-board vga driver does not work for the 2nd monitor.


Answers :

Hi!

the setting for that is in default mode, now try to reset it on the NVIDIA settings.

regtards..
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor screen settings problems


Try to see if the mainboard has an AGP slot. You can insert that Crd on the AGP slot and configure it in the bios to use the AGP port of the VGA. and install the driver for it.\015\012\015\012If you still use the Built in card, you can d ... PC Desktops

I have aDC7100CMT with a Radeon x300 pci express card and I want to hook up 2 moniters. I bought a VGA splitter and I get the same picture on both screens. When I go to moniter settings it will not setup the 2nd moniter.I tried hooking one to the card and one to the motherboard it the mother board connection won't work.


The specs say that the Radeon x300 has Dual integrated display controllers so it should run two monitors. I don't know why you're using a video splitter. All you're doing is splitting one video signal into 2 parts and both monitors will show the ex ... HP Compaq d330 (DG315A) PC Desktop

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

Having problems getting two monitors to show up on Display Appearance screen. I bought a Nvidia low prolfile AGP card and now the on-board vga driver does not work for the 2nd monitor.


Hi!the setting for that is in default mode, now try to reset it on the NVIDIA settings. regtards.. ... PC Desktops

HP Compaq d530 SFF PC


No Ben, there is no jumper for this on the motherboard.The method is to go into BIOS Setup, and change it to AGP. (Should be the default factory setting however, IF you have an AGP graphics card installed)For your comput ... HP Compaq d530 SFF PC Desktop

VGA PCI controllers


Reboot in safe mode. After you boot, hit F8 several times to get to the boot menu. Choose safe mode and hit enter. After it's done booting, go into device manager and reverse the change you made. If you're using a AGP card just make the change in cmo ... Acer Aspire T135 PC Desktop

Desktop larger than screen


Is AGP enabled in the BIOS? ... Computer Monitors

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

RESOLLUTION ISSUES OR GRAPHICS CARD UPGRADE?


Can you please put forth the problem in minimal words? ... HP Pavilion a6650f Desktop PC

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

Direct 3D Driver Installation Or Reinstallation?


The HAL error is because you haven't installed your grafikcard so windows is using a defaultdriver. You need to download the drivers for your videocard. I can't say what card you have, for that you have to read the productpaper that came ... Compaq Evo D510 Minitower (Open Box) (OB4700432011) PC Desktop

My VX924 Green Led Blinks until fully booted to windows


Ok if what im understanding is you tried on another computer and it worked great \015\012the monitor is not your problem the problem lies with your video card\015\012the video card could be outdated\015\012the video card could need ... ViewSonic VX924 19" LCD Monitor

No video display


If the video card is built into the motherboard then try starting in safe mode and reinstalling the drivers from scratch. Download the latest drivers from the dell website. Safe mode will reduce the resolution and use a generic VGA driver. If your vi ... Dell Dimension 4600 PC Desktop

Onboard VGA port disabled, in Vista


You should try to disable it in the hardware list. \015\012\015\012E-machines have an odd bios where not all the functions of the motherboard are available to the user.\015\012\015\012If you can find the make and model of your ... eMachines EL1210-11 PC Desktop

Is my main board defective??


You should download and install the correct drivers for your video card as well. They should work with basic functionality anyway. As Stan says check the AGP is enabled in your BIOS not only the on-board graphics (on my PC I have two options for t ... AMD K7 , 800Mhz (amdk7800mpr24b)

Building a new PC, cannot get LCD to work


You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

Ive moved my pc from one part of the room to the other and it keeps saying "vidio cable not connected" I did not have one and plugged all cables exactly how they were. This did happen when I first assembled it and I think I needed to install a disk. I cannot find the disk. I cannot get the monitor to connect to the hard drive.


While moving you may have slightly dislodged the Video card. (I am assuming you have connected the VGA cable properly.) If it a desktop, with a VGA card (not integrated on the mother board) this may be the cause. Switch off the computer open the side ... Hannspree 19" Widescreen LCD Flat Panel Monitor

I installed a new power supply and video card in my Compaq presario ( picked out for me by the Geek Squad at Best Buy) and now my monitor shuts itself off before booting up - what is wrong??


Are you able to get a image from the computer as it boots up and then it dissapears once windows starts? If so it sounds like it might be because the new video card is causing the problem because the drivers for the old video are trying to run. Go in ... HP Compaq Presario S4300NX (DF216A#ABA) PC Desktop

The light on monitor stays yellow - Compaq Presario 5000 PC Desktop


If your PC has started HDD flashing and there is power to the monitor this means that the video card has not told the monitor to display, its kind of like in standby you can get this if the onboard VGA is faulty.If you have another basic ... Compaq Presario 5000 PC Desktop

Blurry (bleeding?) display


Try plugging the monitor into a system that is known to be good. If the problem stays the problem is most likely some thing with the monitor (unless it?s the cable, try a new cable also). If the problem goes away the real problem is in your video c ... ViewSonic VG175 17.4" LCD Monitor

Sir i have a toshiba leptop when i open my internet connection picture are not clear at any site please solve


Your question leaves out an important issue: Is it your display not clear in other programs, Desktop, Word, other Applications etc or only when you go on the INTERNET ?\015\012\015\012I'll take it case by case:\015\0121) Try anothe ... PC Laptops

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

PCI video slot changed to AGP video slot


First, install the AGP card in the AGP slot. Plug the monitor into the new video card.\015\012Second, power up and press the F2 key to enter Bios.\015\012The system should default to VGA but through the new and only video card available. ... E-Machines PC Desktops

-computer has gone blank


This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0821 seconds