Having problems with your PC Desktops ?

Front panel motherboard samsung harappa-30 PBA:BA59-00905A

\015 I just installed my motherboard samsung harappa-30 on new casing, but i don't know how to connect cable for power switch,power led,hdd led, and reset, please give me solution, thankyou very much\015

Answers :

I wont to sound drivers for polaris motherbrod
You shuld give power to mother board,,hard drive,optical drive fd,from powersupply,(asmps).then p.led,hddled ,usb,reset wire etc are in casing we can read their name in wire and board.we shuld join it in mother board. we give power to cpu fan from bord 3v. then we should join some cable HDDto bord,OPdrive to board
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My motherboard is a samsung harappa-30, pba: ba59-00905a rev: mp 1.1, help with front panel connection pin connection (hdd lights, reset etc.)


After you open the motherboard at the right hand opposite corner to the IO ports side( where we connect the monitor,keyboard mouse Etc ) you will find a set of 9 pins under which it will be written F_panel and P_sw,Hdd_led,P_led and reset pins and a ... PC Desktops

Front panel motherboard samsung harappa-30 PBA:BA59-00905A


I wont to sound drivers for polaris motherbrod ... PC Desktops

How does the power switch and led plug up on a GT5428 motherboard?


This is Gateway Support, and Support Documents for the Gateway GT5428 Desktop PC,http://support.gateway.com/s/pc/R/1009466/1009466nv.shtml ... Gateway GT5428 PC Desktop

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

I need a diagram for wiring a new power supply to a Gateway 509ge.


Although this problem is a year old, no solution was stated.Stating this in the hope it may help someone in the future;This is Gateway Support, and the main support page for the Gateway 509GE Desktop PC, ... Gateway 509GE PC Desktop

How to remove ibm thinkcentre p4 3.0 motherboard


This is the link to the IBM ThinkCentre S50-8183, Hardware and Maintenance Manual,http://www-307.ibm. ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop

I would like an internal view of eMachine T4150 to be sure everything is connected correctly


There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

My computer light turns on then off, no fan no screen


Changed the power supply and Power On switch?New parts? Okay. We'll come back to them. For now, lets look over some simple things.I can tell you that even after 20+ years as a tech, I still get a little zealous, when it comes to bui ... Smart Modular SV3170A

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


FIC AU31 mb (a.k.a K7m-NF18G mb)Pin Configuration = PinoutThe Front plastic panel of the computer is the Front Panel.The area of pins on the motherboard that the cables (Wires) go to, is the Front Panel header.Front Panel head ... E-Machines T3092 PC Desktop

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

Wires from switch came unplugged (white and black) where do they


Power On switch (Button)? Restart switch? Speakers?Wires came loose from the motherboard?Should like you to see if you can trace the wires back to the front panel, (Where the Power On button is located Granted, this may be a little tough ... E-Machines eMachines Desktop PC

Connecting front panel leads of generic case to 4600 motherboard


\015\012\015\012\015\012\015\012\015\012-MrSlickShoes ... Dell Dimension 4600 PC Desktop

We recently had to disassemble our entire system. Now after moving the system, the tower lights but does nothing but blinks. We've tried detaching the power cord to reset it but that didn't help.


Perhaps the Ram Memory module/s, (Stick/s) are not fully seated in the ram memory slot/s. (Don't know if you have one, or more ram memory modules)Even if they appear to be seated by a visual inspection, the best method is to r ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

Emachine t1840 wiring diagram power switch wire to mother board ?


Because there are so many different case and motherboard combinations\015\012sometimes it can be difficult following the instructions for connecting\015\012the front panel, USB header and audio header.\015\012\015\012Below is a few generi ... PC Desktops

I accedentally knocked the power wires off inside the big box i cant think of the name on my emachine w3507 how do i put back together


Power On switch, (Button), wires from the front panel that go to the motherboard? I could really use the name of the motherboard, to try to get you this information. I don't have an eMachines W3057 sitting in front of me, at the mom ... eMachines W3507 PC Desktop

Front mic port and headphone


To connect your front panel header you must refer to your motherboard manual ...it will given in detail with the pin diagram how to connect ....check the motherboard compatibility some motherboards dont support working of the back p ... Computer Cases

How do hook up front panel power switch to motherboard


The simple way is to remove the front panel of the computer trace the wires to the front panel leds, make note of color pair to each led. The using the manual that came with the motherboard locate the schematic for the JFP1 connector on the motherbo ... E-Machines eMachines Desktop PC

No Boot on 1600sc


The easy answer is:\015\012\015\012Did you ensure the CPU fan connector is attached to the PROPER motherboard CPU fan power pins?\015\012\015\012The 2nd easy answer is:\015\012\015\012Are you sure your CPU is properly placed inside the socket? Could ... Dell PowerEdge 1600SC Server

My hp pavilion a336n will not turn on. When I plug the power cord in the light on the back of the hard drive will turn on, but when I press the power button nothing happens... any suggestions?


To resolve this issue you may need to open the chassis (the computer cabinet). You can call HP specialized support for help but they charge you for the support. You can call them at 866-211-5207. \015\012\015\012OR - Follow the given step ... HP PC Desktops

CPU doesn't turn on!!


\015\012\015\012\015\012\015\012\015\012Power supply light on or flashes\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure ... PC Desktops

Dell Dimension 5100 No Power No lights


Hi Eric,\015\012\015\012Don't Worry we can fix this this problem.\015\012\015\012This seems to be no power issue.\015\012\015\012Just mail your email address and number to [email protected]\015\012\015\012Thanks,\015\012Prem ... Dell Dimension 5100 (D51L1) PC Desktop

Broken USB jack, no power.


1) Unplug the computer from power. Open the computer case.2) TOUCH the metal frame of the computer case. (Not shouting)This will relieve your body of Static electricity.3) Unplug the front panel USB cable from the mother ... Dell OptiPlex GX520 PC Desktop

Pavillion does not start up push power on and nothing happens blinking light on back of power supply


Power supply light on or flashesPerform the following steps, in order, until power is restored or it is determined that there is a hardware failure:\015\012\015\012\015\012\015\012\015\012\015\012\015\012CAUTION:\015\012\015\012This product conta ... HP Pavilion a1610n PC Desktop

Fast green blink


Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure:1.Disconnect everything from the computer, including the power cord.2.With the power cord disconnected , press the p ... HP Pavilion a340n (DQ099AABA) PC Desktop

Front panel samsung harappa-7 pinout - PC Desktops


How many capacity of processor use in harappa -7 ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4626 seconds