Having problems with your PC Desktops ?

I have a new Emachine with Vista and nvidia drivers. It is connected to a Dynex 32'' LCD. (Old Compaq worked fine on this monitor). I set the monitor resolution to the correct size and had to adjust (move)the display slightly to the right in order to center it, so that I could see everything. It looked perfect. However, anytime the monitor goes into standby or the screensaver kicks in or I reboot, the monitor has to be re-adjusted (screen has to be re-centered again). In other words, the setting


Answers :

I seem like your memory ic is wrong maybe the lcd or try to change your grapic card just borrow from somebody and try first ok
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a new Emachine with Vista and nvidia drivers. It is connected to a Dynex 32'' LCD. (Old Compaq worked fine on this monitor). I set the monitor resolution to the correct size and had to adjust (move)the display slightly to the right in order to center it, so that I could see everything. It looked perfect. However, anytime the monitor goes into standby or the screensaver kicks in or I reboot, the monitor has to be re-adjusted (screen has to be re-centered again). In other words, the setting


I seem like your memory ic is wrong maybe the lcd or try to change your grapic card just borrow from somebody and try first ok ... PC Desktops

Hp pavilion dv6000


The only internal power for a laptop is the battery. The external power is the AC adapter. (Charger)If you're asking for the schematics, for the circuitry and component layout of the motherboard, to my knowledge only HP trained authorized techn ... HP Pavilion dv6000z Notebook

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Monitor Picture is Blurry because of shadows


If you've already checked all your cable connections, to make sure they're tight, check your windows settings: Go to Start>rt click My computer, choose properties, settings on performance, and choose adjust for best performance. (This will unche ... Gateway FPD1760 17" LCD Monitor

MONITOR KEEPS GOING OFF.


Try your monitor with another computer. If it's still a problem. \015\012\015\012This is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After the monitor goes off, you\015\012check that you can see t ... Dell E173FP 17" LCD Monitor

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

HP m7060n Media Center PC had boot problem: now won't display any


Lets try to repair it using the windows installation disc. First things first, look at the motherboard down on the right lower side. I would like you to find the CMOS jumper, it will be three pins sticking up with a plastic jumper made of plastic fit ... HP Media Center m7060n PC Desktop

The computer is asking for system diskette,what should i do?


Are their any disks in the CD/DVD or the floppy drives? That would cause this. It is the most common cause. Is S.M.A.R.T. turned on in the BIOS? You will see a message during the POST that says it is enabled or disabled. The POST is the " ... Acer Veriton 7100 PC Desktop

Power Surge damage. Suggestions on which part to replace.


I would start looking at the power supply, it's usually a separate board where the a/c line plugs into. In many cases i have seen that the problem you described is from a damaged power supply, sounds like something is shorting causing the power supp ... Proview PL713S 17" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Screen goes black after 30 mins of working.


There are a few things you need to check here.1. It could be that your computer power management is set to turn your monitor and harddrive off after 30 to 45 min.If the computer is however working for 30 to 45 min while you doing st ... Dell Dimension 5100 (D51L1) PC Desktop

Monitor Hi, My computer seems to be booting properly however when windows launches my monitor goes dark. Not black... It is like there is a screen over my screen?? I can see (just barely) my icons and can shut the computer back down. I cant see enough to use it or do anything on it. I get this sometimes when using the restart computer function but can usually get it to shut down and start working properly after. However, this time it is not the case. It looks like there is still something runnin


Sounds like you may have a bug, you could try re-ionstalling everything fresh, it may need a driver update. Check the funtcion keys. Sometimes you can turn up the screen contrast by holding the function key and hiiting the function key that looks li ... Dell Latitude C640 Notebook

When I turn on my Sceptre monitor it stays on for a few seconds


This seems to be a comman fault with alot of monitors, the problem is caused by faulty componants on the power board called capacitors.If you have soldering skills and a bit electronic knowledge its an easy repair and one that you could t ... Sceptre Computer Monitors

StudioWorks 700s Monitor No Signal


It could be that the resolution settings that you had with the old monitor are not compatible with the new monitor. Try hooking up your old monitor and either lowering or highering the resolution and see if that corrects the problem. Can you give ... Proview PL926WBi 19" LCD Monitor

My monitor when powered up gives me a no input signal for VGA and DVI and then goes into sleep mode after 15 seconds. I plugged in a second monitor and have a no signal message too. Should i replace the video card or has the monitor locked itself out. Please advise....Best Regards Beth.


Hey BethSounds like you are in a bit of trouble!Based on what you've told me, it looks like it might be a video card fault. However, a few things to check first are..Make sure the VGA & DVI are secured tightly ... HP f2105 21" LCD Monitor

Dell Inspiron 1000 laptop LCD screen blackout


I HAVE POSTED THE SOLUTION FOR THIS BEFORE. ON THE LEFT REAR THE SCREW FROM BOTTOM OF UNIT TO THE LCD. LOOK INSIDE WHERE THE TOP AND BOTTOM GO TOGETHER YOU WILL SEE A PIECE OF ALUMINUM TAPE IF IT STICKS OUT PAST THE BOSS TOWARD THE PC BOARD. WHEN YO ... Dell Inspiron 1000 Notebook

X2gen mw19u 19'' widescreen monitor going black


X2GEN - MW19U, same problem as described in the other posts. A week ago after a reboot it did not turn on. Pressed the power button, it turned off. Pressed it again after about a minute, all was fine until this morning. Same as before except t ... X2Gen MG19MY 19" LCD Monitor

Hello, I have a Gateway model GT5662, stock setup - Will not boot


Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

Green light comes on for a few seconds then turns orange


Hello,If you have a popped cap then the mosfets are blown. They blow as soon as the cap shorts and pops. You need to replace both mosfets and the 220uf caps and test the fuse with a multimeter I would bet its blown too.Buddy ... Acer AL1916W 19" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Compaq Presario V2000 Screen went black


I know this is stupied but I had the same problem and it is fixed now - here goes techies - I called HP and of course they were giving me the story out of warrenty - i could pay to talk to them and all the other stuff. They had no clue and neither d ... HP Compaq Presario V2000 Notebook

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9255 seconds